*FIXED* Cruise control dead when Procede Installed

Transport3r · 11-12-2010, 10:21 PM

I just installed my procede in the 335i.
The motor runs beautifully and very strong

, no check engine lights.
My car is officially the fastest thing I have ever driven

However, cruise control wouldn't work at all, just like if DSC would be completely off.
After leaving the car for ~1hour, I drove it again and long behold, CC works.

Sidenote:
2nd gear is absolutely brutal if the tires hook. That's a big if... (need LSD)

AltecBX · 11-12-2010, 10:25 PM

Make sure you have the traction system on. (DSC & DTC)
Cruise controls works by just pushing it forward or back. push it down to deactivated. You can't push up as is used to check the map you're in.

Transport3r · 11-12-2010, 10:37 PM

Traction is fully on. I know how to use cruise control

It just shows --MPH
Even on map 0

Is there a video on how to read codes with the USB cable?

Is this right?

-Turn ignition on,
-Full Throttle>>Half engine light
-datalogging>>start data log,
-datalogging>>view data log,
-and look at what 'Debug Word 8' is doing?

Quote:

Originally Posted by AltecBX

Make sure you have the traction system on. (DSC & DTC)
Cruise controls works by just pushing it forward or back. push it down to deactivated. You can't push up as is used to check the map you're in.

OpenFlash · 11-12-2010, 10:43 PM

Quote:

Originally Posted by joshuo

Traction is fully on. I know how to use cruise control

It just shows --MPH
Even on map 0

Is there a video on how to read codes with the USB cable?

Is this right?

-Turn ignition on,
-Full Throttle>>Half engine light
-datalogging>>start data log,
-datalogging>>view data log,
-and look at what 'Debug Word 8' is doing?

You don't really need to read codes. If you just want to clear any hidden codes, simply double-pump the throttle with the ignition power on. No laptop required. But to read codes, you simply view the CAN DME Codes channel in the datalog window. No need to take any logs or know what any of the debug values are (although they are labeled appropriately in "Units".)

As for cruise control not working, something else is going on. Shoot me an email (shiv@vishnutuning.com) and I'll help off-line during the weekend.

Cheers,
Shiv

Transport3r · 11-12-2010, 10:54 PM

okay, Shiv. Thanks!
I'm going to take the Procede out in the morning to run a USB chord through the firewall anyway. I'll test CC without the procede, put it back in and report to you via email.

2 3pair · 11-12-2010, 11:33 PM

This is interesting because I had the same thing happen to me with the "--mph" while I was on the road. All of the sudden, cruise control just stopped working. No matter what I did, it wouldn't come back on. After about 10 minutes of driving, I gave it another shot, and it worked. I had just installed the PROcede, but couldn't figure how that would be related. Hasn't happened since, but I very rarely use cruise control.

Transport3r · 11-12-2010, 11:38 PM

FIXED! Thanks 2 3pair!

It just started working!!

No idea what triggered it, I'll check for any codes tomorrow.

11-12-2010, 10:21 PM	#1
Transport3r Major 87 Rep 1,262 Posts Drives: 2011 N55 E90 Join Date: Sep 2010 Location: Melbourne, FL iTrader: (4)	FIXED Cruise control dead when Procede Installed I just installed my procede in the 335i. The motor runs beautifully and very strong, no check engine lights. My car is officially the fastest thing I have ever driven However, cruise control wouldn't work at all, just like if DSC would be completely off. After leaving the car for ~1hour, I drove it again and long behold, CC works. Sidenote: 2nd gear is absolutely brutal if the tires hook. That's a big if... (need LSD) __________________ Josh- Last edited by Transport3r; 11-13-2010 at 12:01 AM..
	Appreciate 0 Tweet Quote

11-12-2010, 10:25 PM	#2
AltecBX Colonel 340 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Make sure you have the traction system on. (DSC & DTC) Cruise controls works by just pushing it forward or back. push it down to deactivated. You can't push up as is used to check the map you're in. __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

11-12-2010, 10:54 PM	#5
Transport3r Major 87 Rep 1,262 Posts Drives: 2011 N55 E90 Join Date: Sep 2010 Location: Melbourne, FL iTrader: (4)	okay, Shiv. Thanks! I'm going to take the Procede out in the morning to run a USB chord through the firewall anyway. I'll test CC without the procede, put it back in and report to you via email. __________________ Josh-
	Appreciate 0 Quote

11-12-2010, 11:33 PM	#6
2 3pair Second Lieutenant 4 Rep 284 Posts Drives: as often as possible Join Date: Jun 2010 Location: Memphis iTrader: (2)	This is interesting because I had the same thing happen to me with the "--mph" while I was on the road. All of the sudden, cruise control just stopped working. No matter what I did, it wouldn't come back on. After about 10 minutes of driving, I gave it another shot, and it worked. I had just installed the PROcede, but couldn't figure how that would be related. Hasn't happened since, but I very rarely use cruise control. __________________
	Appreciate 0 Quote

11-12-2010, 11:38 PM	#7
Transport3r Major 87 Rep 1,262 Posts Drives: 2011 N55 E90 Join Date: Sep 2010 Location: Melbourne, FL iTrader: (4)	FIXED! Thanks 2 3pair! It just started working!! No idea what triggered it, I'll check for any codes tomorrow. __________________ Josh- Last edited by Transport3r; 11-12-2010 at 11:57 PM..
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search