[r3za]

I have 2 cell phones. Is it possible to have the car pair with both of them? I know on Plantronics headsets this is a supported function. :x:

[shadowcoder]

No.

[LEDZEP]

Depends what you mean when you say "pair". Your bluetooth system in the E9x can pair with up to four devices. But you can only have one active bluetooth connected device at any one time.

In post-September '05 built cars you can select the priority for the phones (so that when two or more paired phones are in the car, it will connect to the one you want it to connect to).

An active connection to two phones is not very practical. How would you manage the system when both phones are actively engaged in calls?

[Dollar Bill]

If I understand your question correctly the answer is yes.
I have a 2007 335 and you can pair more than one cell.
The BMW phone directions explain this.
I believe you must prioritize them but it is possible.
I was told but never tried that if both were conected it would work by priority. If you're on phone 1 I don't think you get a call on phone 2 at the same time. But if you're not on phone 1 and get a call on phone 2 you would be able to answer. My salesmen explained this to me.

[FirstClass]

Originally Posted by Dollar Bill

If I understand your question correctly the answer is yes.
I have a 2007 335 and you can pair more than one cell.
The BMW phone directions explain this.
I believe you must prioritize them but it is possible.
I was told but never tried that if both were conected it would work by priority. If you're on phone 1 I don't think you get a call on phone 2 at the same time. But if you're not on phone 1 and get a call on phone 2 you would be able to answer. My salesmen explained this to me.

Same here, I was told you can pair 2 but never tried. My CA told me that if I had a passenger with a bluetooth cell that they could press the little phone button on their side of the radio to answer their phone. Never tried it though.

[JSpira]

Originally Posted by FirstClass

Same here, I was told you can pair 2 but never tried. My CA told me that if I had a passenger with a bluetooth cell that they could press the little phone button on their side of the radio to answer their phone. Never tried it though.

Nonsense. The phone would have to be paired first and then the passenger´s phone would have to be the connected one at the time a call comes in.

The buttons all do the same thing.

[JSpira]

Originally Posted by r3za

I have 2 cell phones. Is it possible to have the car pair with both of them? I know on Plantronics headsets this is a supported function. :x:

You can have up to 4 mobiles paired with the car at the same time.

[DrDomer]

I have confused my phone (Treo700P) by having the bluetooth active with my car and having my bluetooth headset in the car. I'm sure there's a reasonable explanation, but I just make sure my headset is off. That's the only problem I've run into, and it's not an issue with the car. You can use the car with 4 phones as above. Not sure about the "all at once" feature.

[hunt55]

I have the 06 325i paired with my Motorola E815 and my wife's RZAR. The car pairs both phones and you determine which has priority. You can easily switch between each phone via the phone BT menu.

With comfort access the fob will connect to whichever phone is personalized to the fob. I.e., when my wife uses the car, it automatically connects to her phone as the primary and when I use the car it automatically uses my phone as the primary.

[Dollar Bill]

In regards to the headset.
I have an option of which bluetooth to conect to on my Blackberry. You can also select this to connect automatically. Try to unselect the auto connect and you will be promted to connect when you first enter the car. This should eliminate your device being confused by headset.

[vkk]

Are 2 separate address books maintained based on the phone sync'ed from?

[r3za]

i will try this tomorrow! thanks guys.

[rogataber]

Originally Posted by vkk

Are 2 separate address books maintained based on the phone sync'ed from?

Yes

[LEDZEP]

Originally Posted by Dollar Bill

But if you're not on phone 1 and get a call on phone 2 you would be able to answer. My salesmen explained this to me.

Your salesman is interested in selling cars and trying to sound like he knows what he's talking about - which he does not. There can be only ONE *active* connection at any time. The priority function is used to determine which phone will be actively connected when more than one paired phone is present.

The simplest way to think of it is this: you have a TV that gets 4 channels... how many of those channels can you be watching at one time?

Think it over... I'll wait...

[JSpira]

Originally Posted by LEDZEP

The simplest way to think of it is this: you have a TV that gets 4 channels... how many of those channels can you be watching at one time?

Hate to do this to you but the answer here is ,,two``

Of course with Bluetooth the answer is ,,1``