Where to get bomb-proof gaskets?

cstmx_ryder · 02-10-2011, 12:49 AM

Where's the cheapest place to get these? I know they came with DPs but I want a couple more.....

TIA

forza1976 · 02-10-2011, 12:49 AM

ar design

themyst · 02-10-2011, 12:58 AM

Quote:

Originally Posted by forza1976

ar design

+1

Bimmer This · 02-10-2011, 12:59 AM

+2!

McMuffin · 02-10-2011, 01:04 AM

cstmx_ryder · 02-10-2011, 02:15 AM

k thanks!!

creaminz · 02-10-2011, 04:40 AM

u have exhaust leak? blown gasket?

BobS · 02-10-2011, 07:16 AM

Just ordered mine from Ar's website.

cstmx_ryder · 02-10-2011, 09:37 AM

Man I don't even know.....not to blame anything on the exhaust install but EVERYTHING was dine before that.....

I'm trying to narrow it down, but I know something's not right.....

I first thought it was the coupler connecting the cp to the IC pipe, checked and changed that, but issue remains.

So now I'm thinking it's the connection between the dp and the exhaust.....cause my shop guys said that he had to reuse the old gasket.

F$

ETS Michael · 02-10-2011, 11:57 AM

Quote:

Originally Posted by cstmx_ryder

Man I don't even know.....not to blame anything on the exhaust install but EVERYTHING was dine before that.....

I'm trying to narrow it down, but I know something's not right.....

I first thought it was the coupler connecting the cp to the IC pipe, checked and changed that, but issue remains.

So now I'm thinking it's the connection between the dp and the exhaust.....cause my shop guys said that he had to reuse the old gasket.

F$

Damn that sucks, I compared the old gasket to our downpipes and if you reuse the old gasket you will have a slight lip from the gasket, but it shouldn't be too much of a problem. It's worth a try though.

I forgot to look but can you adjust the blow off valve you have? I started thinking last night with the change in vanos the vac might change and open the blow off valve at certain RPM due to the spring stiffness being set for stock vac. Just an idea.

Michael

creaminz · 02-10-2011, 01:32 PM

I had an exhaust leak, it was actually blown gasket. Even at idle my exhaust was making pretty loud flapping sounds and could only reach 11-12 psi. Once i replaced with bomb proof gasket, everything was fine. But then now i have whistle hissing after let go off throttle 1/2 way...stupid leaks everywhere on this car!!!

cstmx_ryder · 02-10-2011, 01:34 PM

Wait what about the VANOS? how would that be diff by adding catless exhaust?

I think I can adjust the BOV, but haven't touched that since the day I installed it......

ETS Michael · 02-10-2011, 01:44 PM

I was just thinking out loud. Maybe the change in vanos changes the cam position which changes the vacuum. If you can adjust the blow off valve I would try tightening it up a bit and see what happens.

Michael

cstmx_ryder · 02-10-2011, 01:47 PM

Hissing sound from your DV/BOV when let off throttle? Isn't that normal?

Mines comes on when going WOT.....it just sounds more and more like my BOV dumping boost half way like when you're on light throttle......

God damn it!! Lol

Quote:

Originally Posted by creaminz

I had an exhaust leak, it was actually blown gasket. Even at idle my exhaust was making pretty loud flapping sounds and could only reach 11-12 psi. Once i replaced with bomb proof gasket, everything was fine. But then now i have whistle hissing after let go off throttle 1/2 way...stupid leaks everywhere on this car!!!

cstmx_ryder · 02-10-2011, 01:50 PM

So I do have a bolt that stick out the top of my bov, with a line marked by sharpie(came that way). Which way is to tighten? Is it still righty tighty and lefty

Also, can anyone with the AA BOV chime in on this?

TIA

Quote:

Originally Posted by ETS Michael

I was just thinking out loud. Maybe the change in vanos changes the cam position which changes the vacuum. If you can adjust the blow off valve I would try tightening it up a bit and see what happens.

Michael

ar design · 02-10-2011, 02:35 PM

I have the gaskets in stock

cstmx_ryder · 02-10-2011, 03:01 PM

I jut ordered them this morning, and I believe it's on it's way!

Thanks AR!

Bimmer This · 02-10-2011, 04:15 PM

Quote:

Originally Posted by ar design

I have the gaskets in stock

have you tested them to see if they really are BOMB PROOF?

Tzu · 02-10-2011, 06:12 PM

Quote:

Originally Posted by Bimmer This

have you tested them to see if they really are BOMB PROOF?

How many bombs exactly? 10-12 little ones and 3-5 big ones?

Bimmer This · 02-10-2011, 11:18 PM

must be cracker bomb proof. lol

Brey335i · 02-10-2011, 11:36 PM

AR has the best gaskets so of course order from them

wtfmateim65 · 02-11-2011, 03:09 AM

what about The v-band clamps? are we supposed to reuse the stockers or where can we buy another set because i haven't been able to find them on ar's website??

02-10-2011, 12:49 AM	#1
cstmx_ryder Colonel 173 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	Where to get bomb-proof gaskets? Where's the cheapest place to get these? I know they came with DPs but I want a couple more..... TIA __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Tweet Quote

02-10-2011, 12:49 AM	#2
forza1976 Major General 3514 Rep 6,627 Posts Drives: BMW Join Date: Aug 2007 Location: 49456 iTrader: (13) Garage List 2022 BMW M3X [9.50]	ar design
	Appreciate 0 Quote

02-10-2011, 12:59 AM	#4
Bimmer This Major General 103 Rep 6,473 Posts Drives: 2007 BMW 335i Join Date: Nov 2008 Location: Westminster iTrader: (3)	+2!
	Appreciate 0 Quote

02-10-2011, 01:04 AM	#5
McMuffin Lieutenant Colonel 132 Rep 1,549 Posts Drives: A Widebody 92 Join Date: Nov 2008 Location: Califas iTrader: (5)
	Appreciate 0 Quote

02-10-2011, 02:15 AM	#6
cstmx_ryder Colonel 173 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	k thanks!! __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

02-10-2011, 04:40 AM	#7
creaminz Major General 556 Rep 7,701 Posts Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal iTrader: (33)	u have exhaust leak? blown gasket?
	Appreciate 0 Quote

02-10-2011, 07:16 AM	#8
BobS Colonel 98 Rep 2,002 Posts Drives: M3 Join Date: Feb 2009 Location: Southern NJ iTrader: (0)	Just ordered mine from Ar's website. __________________ ESS 650 ACM-R Upgrades
	Appreciate 0 Quote

02-10-2011, 09:37 AM	#9
cstmx_ryder Colonel 173 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	Man I don't even know.....not to blame anything on the exhaust install but EVERYTHING was dine before that..... I'm trying to narrow it down, but I know something's not right..... I first thought it was the coupler connecting the cp to the IC pipe, checked and changed that, but issue remains. So now I'm thinking it's the connection between the dp and the exhaust.....cause my shop guys said that he had to reuse the old gasket. F$ __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

02-10-2011, 01:32 PM	#11
creaminz Major General 556 Rep 7,701 Posts Drives: E90 LCI Join Date: Sep 2005 Location: So. Cal iTrader: (33)	I had an exhaust leak, it was actually blown gasket. Even at idle my exhaust was making pretty loud flapping sounds and could only reach 11-12 psi. Once i replaced with bomb proof gasket, everything was fine. But then now i have whistle hissing after let go off throttle 1/2 way...stupid leaks everywhere on this car!!!
	Appreciate 0 Quote

02-10-2011, 01:34 PM	#12
cstmx_ryder Colonel 173 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	Wait what about the VANOS? how would that be diff by adding catless exhaust? I think I can adjust the BOV, but haven't touched that since the day I installed it...... __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

02-10-2011, 01:44 PM	#13
ETS Michael Major 80 Rep 1,155 Posts Drives: 335i Join Date: May 2009 Location: Vancouver, WA iTrader: (4)	I was just thinking out loud. Maybe the change in vanos changes the cam position which changes the vacuum. If you can adjust the blow off valve I would try tightening it up a bit and see what happens. Michael
	Appreciate 0 Quote

02-10-2011, 02:35 PM	#16
ar design 302 Rep 4,408 Posts Drives: 04 M3 Join Date: Jan 2008 Location: Denver, CO iTrader: (9)	I have the gaskets in stock
	Appreciate 0 Quote

02-10-2011, 03:01 PM	#17
cstmx_ryder Colonel 173 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	I jut ordered them this morning, and I believe it's on it's way! Thanks AR! __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

02-10-2011, 11:18 PM	#20
Bimmer This Major General 103 Rep 6,473 Posts Drives: 2007 BMW 335i Join Date: Nov 2008 Location: Westminster iTrader: (3)	must be cracker bomb proof. lol
	Appreciate 0 Quote

02-10-2011, 11:36 PM	#21
Brey335i Banned 118 Rep 4,771 Posts Drives: e46 ///M3 Join Date: Oct 2009 Location: Austin, TX iTrader: (11)	AR has the best gaskets so of course order from them
	Appreciate 0 Quote

02-11-2011, 03:09 AM	#22
wtfmateim65 First Lieutenant 18 Rep 305 Posts Drives: AW 92 335i JB4 Join Date: Sep 2008 Location: Vegas iTrader: (2)	what about The v-band clamps? are we supposed to reuse the stockers or where can we buy another set because i haven't been able to find them on ar's website??
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search