[carlosalbertogui]

hi all

i have bi xenon non ahl LCI working but i dont have high beams

do you now what pin do that ???


Pin 6 in LCI is empty
on pre lci pin 6 it was high beam.

i wired pin 5 and now i have flash but only low beam not high beam as it should be
if i pull the stalk the ligts flash low beam.
if i push the stalk nothing happen only blue light on dashboard nothing happens to low beam i think the solenoin for shutter is not workin

anyone knows what pin 7 does ???
someone please

[carlosalbertogui]

help please someone

[carlosalbertogui]

bump someone

[Autotuned M3]

Hey, the Pin 6 is the highbeam however there isnt a highbeam on the LCI non-AHL headlights, only a bi-xenon shutter. What you're gonna need to do is find the Bi-xenon shutter wire and wire it to Pin 6. Also, you will need to add a resistor so that your car thinks it has a highbeam Hope this helps.

[carlosalbertogui]

pin 6 is empty all i have to do is put it on pin 5 and change pins on frm the two cables to pin 41 on FRM

all working bixenon and shutter