E90Post
 


Extreme Powerhouse
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > 352hp/377tq JB4 on Dyno Dynamics



Reply
 
Thread Tools Search this Thread
      07-21-2011, 06:17 PM   #1
///M3THOD
Lieutenant Colonel
///M3THOD's Avatar
United_States
120
Rep
1,625
Posts

Drives: 991.2 GTS
Join Date: Dec 2009
Location: ATL

iTrader: (30)

352hp/377tq JB4 on Dyno Dynamics

Just got my first dyno's back, mods are as follows;

JB4 - 6/14 firmware, map 2 (14.5psi)
Helix FMIC
CP-e CP/Tial BOV
AA 3" catless DP's
AE exhaust
AFE DCI

95 degrees ambient temperature

Picked up 30rwhp from adding the Helix FMIC, but I also installed new stock turbo's as well. I was going to upgrade the turbo's on the car, but decided against it simply to make resale easier. I don't see keeping the car much more than a year or so and it would have made selling it difficult.

Anyway, I very pleased with the results. On a Dyno Dynamics figure 15% additional on top of that number for 405rwhp, even a conservative 12% equals 394rwhp. I am very pleased with those numbers.

All work done by Buckhead Imports Performance in Atlanta, GA.

I'm not sure what the correction is on this but from the dyno I think its probably 0
__________________
2014 Individual /// M5 Competition AW/AB

|| Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge ||

Last edited by ///M3THOD; 07-21-2011 at 08:05 PM..
Appreciate 0
      07-21-2011, 09:25 PM   #2
GQ335i
First Lieutenant
United_States
18
Rep
368
Posts

Drives: BMW M5 (E60)
Join Date: Apr 2010
Location: PA/NJ

iTrader: (5)

Nice man. Numbers look good!
__________________
Appreciate 0
      07-21-2011, 09:42 PM   #3
Bimmer100_
Captain
Bimmer100_'s Avatar
United_States
413
Rep
850
Posts

Drives: 23 G80 M3 6SPD
Join Date: May 2011
Location: Long Island

iTrader: (12)

Garage List
All dynos read differently. People are so caught up in peak numbers. What matters is how much of a gain was achieved after installing mods which is why getting a baseline dyno is important...
__________________
Acura RSX-S K24a2 JRSC Swap - SOLD
CPO BMW 335i 6MT - SOLD
Appreciate 0
      07-21-2011, 09:54 PM   #4
onebadmofo
Colonel
onebadmofo's Avatar
353
Rep
2,394
Posts

Drives: 2008 E90 M3
Join Date: Aug 2010
Location: Central NJ

iTrader: (14)

Our cars are twins

Appreciate 0
      07-21-2011, 10:23 PM   #5
Never-Enough
Banned
United_States
50
Rep
1,038
Posts

Drives: 2007 335xi E90
Join Date: Feb 2011
Location: PA

iTrader: (19)

405 WHP? I don't see that on those mods...

Decent dyno #s though.
Appreciate 0
      07-22-2011, 02:24 AM   #6
///M3THOD
Lieutenant Colonel
///M3THOD's Avatar
United_States
120
Rep
1,625
Posts

Drives: 991.2 GTS
Join Date: Dec 2009
Location: ATL

iTrader: (30)

Quote:
Originally Posted by Never-Enough View Post
405 WHP? I don't see that on those mods...

Decent dyno #s though.
Thats at the extreme end.. either way the dyno is healthy for 14.5 pounds of boost
__________________
2014 Individual /// M5 Competition AW/AB

|| Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge ||
Appreciate 0
      07-22-2011, 12:21 PM   #7
///M3THOD
Lieutenant Colonel
///M3THOD's Avatar
United_States
120
Rep
1,625
Posts

Drives: 991.2 GTS
Join Date: Dec 2009
Location: ATL

iTrader: (30)

Thought I would have more comments on a thread like this..?!?
__________________
2014 Individual /// M5 Competition AW/AB

|| Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge ||
Appreciate 0
      07-22-2011, 01:16 PM   #8
Javier
Major
Javier's Avatar
Puerto Rico
89
Rep
1,109
Posts

Drives: 335i E92
Join Date: Nov 2006
Location: Puerto Rico

iTrader: (0)

Am i the only one that thinks this is low for FBO and JB4
You should be at 390's with those mods.

My FBO buddies rutinely put down 390's with 90deg PR heat
__________________
2007 328i Crimson Red *SOLD*
2010 335i MSport AW E92
Appreciate 0
      07-22-2011, 01:46 PM   #9
///M3THOD
Lieutenant Colonel
///M3THOD's Avatar
United_States
120
Rep
1,625
Posts

Drives: 991.2 GTS
Join Date: Dec 2009
Location: ATL

iTrader: (30)

Quote:
Originally Posted by Javier View Post
Am i the only one that thinks this is low for FBO and JB4
You should be at 390's with those mods.

My FBO buddies rutinely put down 390's with 90deg PR heat
Its on a Dyno Dynamics.. add 12-15% and we are right there.
__________________
2014 Individual /// M5 Competition AW/AB

|| Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge ||
Appreciate 0
      07-23-2011, 01:59 AM   #10
///M3THOD
Lieutenant Colonel
///M3THOD's Avatar
United_States
120
Rep
1,625
Posts

Drives: 991.2 GTS
Join Date: Dec 2009
Location: ATL

iTrader: (30)

Quote:
Originally Posted by BWSTEG View Post
All dynos read differently. People are so caught up in peak numbers. What matters is how much of a gain was achieved after installing mods which is why getting a baseline dyno is important...
I don't remember what the baseline was, but the FMIC alone(and new turbo's) picked up 30rwhp.
__________________
2014 Individual /// M5 Competition AW/AB

|| Vorsteiner FF-103 || BMS JB4 || Meisterschaft GTC || RPI || IND || Challenge ||
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:25 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST