[sA x sKy]

Getting AR DP's installed next Saturday and need to do an inspection check before then so I don't have to worry about it for a year. Where's the best place to get it done?

Also, I'm planning to keep my tune in as I don't think that messes with anything with auto-clear on. I'll put it on map 0 obviously to be on the safe side.

[kamek]

Originally Posted by sA x sKy

Getting AR DP's installed next Saturday and need to do an inspection check before then so I don't have to worry about it for a year. Where's the best place to get it done?

Also, I'm planning to keep my tune in as I don't think that messes with anything with auto-clear on. I'll put it on map 0 obviously to be on the safe side.

Dude just take it to any shop that does inspection... They plug in to your car, scan, and you're on your way in like 5 min. Or just take it to Matt at CamberToe.

[CJ421]

That downpipe will trigger a code; the CAN tool from BMS ($80) clears it. Alternatively just get the JB4 Stage 2. I think Procede V5 clears it as well, that's obviously more expensive than a JB however.

I have the AR catless DP in my N55 and a JB3 Stage 1 plus the CAN tool to clear the code.

[D335NUTZ]

Originally Posted by CJ421

That downpipe will trigger a code, so you need either the CAN tool from BMW ($80) or get the JB4 Stage 2. I think Procede V5 clears it, that's obviously more expensive than a JB.

I have the AR catless DP in my N55 and a JB3 Stage 1, plus the CAN tool to clear the code.

I think he's getting the inspection done BEFORE he puts his DPs in, but he already has a tune in.

[CJ421]

Originally Posted by Wilazn

I think he's getting the inspection done BEFORE he puts his DPs in, but he already has a tune in.

Yeah it definitely makes sense to get inspection beforehand.

But one way or another the code from catless DPs is annoying (SEL light), I bought the CAN tool immediately. So I'd recommend him get something regardless.

[uwotm8]

check out petrolwerks since you're in long island. they are located in lindenhurst

http://www.facebook.com/pages/Petrol...648937?sk=info

[kamek]

You know what? Just take it to Matt. There, done. lol

[sA x sKy]

Originally Posted by CJ421

Yeah it definitely makes sense to get inspection beforehand.

But one way or another the code from catless DPs is annoying (SEL light), I bought the CAN tool immediately. So I'd recommend him get something regardless.

I have the N55 stage 2. Dpfix is built in.

[madeinhongkong]

Just go to Matt

[NYC_e92]

just had my DPs and inspection done by Matt last week. He did a great job

[sA x sKy]

Originally Posted by Boost2Perfection

Just go to Matt

Matt's too out of the way for me and I have a lot of homework and shit to get done so I'm just going to go to Pep Boys in Hicksville tomorrow or something. 10 min vs 30-60 min in traffic. Thanks for the insights guys.