meth kit advice

chrisw335i · 09-26-2011, 09:28 PM

i am currently debating on adding meth to my system, however since i have the injen intake, im gonna have to go the trunk mount system. any advice or opinions on a trunk mount system that fully integrates with the procede. I have seen the WW kit but only seen installation on a jb4. can this kit be used with the procede and if anyone has done so, what on your thoughts about such kit and installation of it. thanks!

chrisw335i · 09-26-2011, 10:30 PM

anyone?

OpenFlash · 09-26-2011, 10:33 PM

There is a trunk mount version of our PWM kit that is now available. Functionally the same as our underhood-mount PWM kit. But with a dedicated 1 (or 2) gallon tank and pump mounted in the trunk. A bit more labor to install since you will need to route lines under the car. But still a day job.

Shiv

Syndicategt · 09-26-2011, 11:08 PM

You can use an Aquamist HSF3 if you have to use a trunk mount. It works with any tune, but only map switches with the piggies. My advice is don't lock yourself in with a trunk kit and dont be afraid to yank the Injen, it's not that great to begin with.

Syndicategt · 09-26-2011, 11:11 PM

Didn't know Vishnu had a trunk kit, I would suggest that if you already have a V5.

OpenFlash · 09-26-2011, 11:15 PM

Quote:

Originally Posted by Syndicategt

You can use an Aquamist HSF3 if you have to use a trunk mount. It works with any tune, but only map switches with the piggies. My advice is don't lock yourself in with a trunk kit and dont be afraid to yank the Injen, it's not that great to begin with.

+1
I kinda agree here. If the Injen intake is the only thing keeping you from going with a front mount meth kit, you may want to reconsider. A trunk mount kit will work fine but there are advantages to having all your meth hardware localized and within plain view.

chrisw335i · 09-27-2011, 07:07 AM

can you pm me some pricing on this kit..i wasnt aware you guys had these available. thanks

Quote:

Originally Posted by shiv@vishnu

There is a trunk mount version of our PWM kit that is now available. Functionally the same as our underhood-mount PWM kit. But with a dedicated 1 (or 2) gallon tank and pump mounted in the trunk. A bit more labor to install since you will need to route lines under the car. But still a day job.

Shiv

Mike@N54Tuning.com · 09-27-2011, 09:22 AM

Since you have a v5 I would go with shiv's kit but you can also run the cooling mist cmgs kit as it's compatible with the proceed. Comes as a trunk mount kit. A few proceed guys are using it with good results.

But, like I said above it's always best to use the kit your tuner recommends or supports.

Mike

OpenFlash · 09-27-2011, 11:00 AM

Quote:

Originally Posted by chrisw335i

can you pm me some pricing on this kit..i wasnt aware you guys had these available. thanks

Sure... Give us a call today and Rob or Garrett can go over options/pricing.

longliven54 · 09-27-2011, 03:45 PM

First of all, I highly recommend meth. Install does take a lil figuring out, but soo worth it. I went with the trunk mount, I wasn't too comfortable having to pour meth in WW tank especially when my motor would be hot..but that's just me..
Turn your car into a "meth addict", and reap in the benefits.

chrisw335i · 09-27-2011, 09:02 PM

ok shiv i will call tomorrow..you guys should be receiving my rev2 for upgrade tomorrow morning..i still am very internested in this trunk mount kit and ready to buy if the details and price is right.. i wont be needing the chargepipe. also can anyone get some pictures of this trunk mount kit and post. speaking for myself and many others im sure wanna see it. will this kits meth nozzles fit in my er chargepipe. it already has 1/8 NPT bungs custom welded on it just as your pipe..thanks man!!

09-26-2011, 09:28 PM	#1
chrisw335i First Lieutenant 13 Rep 377 Posts Drives: 2007 BMW 335i Coupe Join Date: Jan 2011 Location: Columbus, Ga. iTrader: (3)	meth kit advice i am currently debating on adding meth to my system, however since i have the injen intake, im gonna have to go the trunk mount system. any advice or opinions on a trunk mount system that fully integrates with the procede. I have seen the WW kit but only seen installation on a jb4. can this kit be used with the procede and if anyone has done so, what on your thoughts about such kit and installation of it. thanks! __________________ 2007 335i Coupe 6AT - Sports Package - Premium Package - Procede V5 Rev 2.5 - Vishnu PWM - Vishnu DCI - Vanguard Exhaust - AR Downpipes - Helix FMIC - 19" Avant Garde M6 Reps - Michelin Pilot Super Sports - Bilstein PSS10 - M3 Suspension Bits - M3 Sway - M3 Strut Brace - GP Thunder -Forge DV -15% Tint - Aero Lip
	Appreciate 0 Tweet Quote

09-26-2011, 10:30 PM	#2
chrisw335i First Lieutenant 13 Rep 377 Posts Drives: 2007 BMW 335i Coupe Join Date: Jan 2011 Location: Columbus, Ga. iTrader: (3)	anyone? __________________ 2007 335i Coupe 6AT - Sports Package - Premium Package - Procede V5 Rev 2.5 - Vishnu PWM - Vishnu DCI - Vanguard Exhaust - AR Downpipes - Helix FMIC - 19" Avant Garde M6 Reps - Michelin Pilot Super Sports - Bilstein PSS10 - M3 Suspension Bits - M3 Sway - M3 Strut Brace - GP Thunder -Forge DV -15% Tint - Aero Lip
	Appreciate 0 Quote

09-26-2011, 10:33 PM	#3
OpenFlash 1849 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	There is a trunk mount version of our PWM kit that is now available. Functionally the same as our underhood-mount PWM kit. But with a dedicated 1 (or 2) gallon tank and pump mounted in the trunk. A bit more labor to install since you will need to route lines under the car. But still a day job. Shiv
	Appreciate 0 Quote

09-26-2011, 11:08 PM	#4
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	You can use an Aquamist HSF3 if you have to use a trunk mount. It works with any tune, but only map switches with the piggies. My advice is don't lock yourself in with a trunk kit and dont be afraid to yank the Injen, it's not that great to begin with. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

09-26-2011, 11:11 PM	#5
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	Didn't know Vishnu had a trunk kit, I would suggest that if you already have a V5. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

09-27-2011, 09:22 AM	#8
Mike@N54Tuning.com Joint Chiefs of Staff 5100 Rep 116,225 Posts Drives: 2007 335i, 2015 M3 Join Date: Dec 2008 Location: N54tuning.com iTrader: (89)	Since you have a v5 I would go with shiv's kit but you can also run the cooling mist cmgs kit as it's compatible with the proceed. Comes as a trunk mount kit. A few proceed guys are using it with good results. But, like I said above it's always best to use the kit your tuner recommends or supports. Mike
	Appreciate 0 Quote

09-27-2011, 03:45 PM	#10
longliven54 Lieutenant 15 Rep 455 Posts Drives: 2007 335i e90 auto Join Date: Jan 2011 Location: victoria iTrader: (6)	First of all, I highly recommend meth. Install does take a lil figuring out, but soo worth it. I went with the trunk mount, I wasn't too comfortable having to pour meth in WW tank especially when my motor would be hot..but that's just me.. Turn your car into a "meth addict", and reap in the benefits. __________________ JB4 G5 / VRSF IC / STETT CAI / GREDDY / custom exhaust / iRotora cross drilled rotots / snow stage 3 meth / 19" iForged senekas / upgraded speakers n CF woofer box / M3 bits/ DINAN camber plates/ KONI/ megan racing toe arm/ supreme power lowering perch
	Appreciate 0 Quote

09-27-2011, 09:02 PM	#11
chrisw335i First Lieutenant 13 Rep 377 Posts Drives: 2007 BMW 335i Coupe Join Date: Jan 2011 Location: Columbus, Ga. iTrader: (3)	ok shiv i will call tomorrow..you guys should be receiving my rev2 for upgrade tomorrow morning..i still am very internested in this trunk mount kit and ready to buy if the details and price is right.. i wont be needing the chargepipe. also can anyone get some pictures of this trunk mount kit and post. speaking for myself and many others im sure wanna see it. will this kits meth nozzles fit in my er chargepipe. it already has 1/8 NPT bungs custom welded on it just as your pipe..thanks man!! __________________ 2007 335i Coupe 6AT - Sports Package - Premium Package - Procede V5 Rev 2.5 - Vishnu PWM - Vishnu DCI - Vanguard Exhaust - AR Downpipes - Helix FMIC - 19" Avant Garde M6 Reps - Michelin Pilot Super Sports - Bilstein PSS10 - M3 Suspension Bits - M3 Sway - M3 Strut Brace - GP Thunder -Forge DV -15% Tint - Aero Lip
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search