E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Missing WOT in 3rd and 4th



Reply
 
Thread Tools Search this Thread
      10-11-2011, 10:20 PM   #1
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

Missing WOT in 3rd and 4th

So I changed out my spark plugs two weeks ago because I was getting some stuttering at idle; it cleared up the issue and also the HPFP was replaced four months ago. As off two days ago my car was stuttering at idle again, but something new happened. Two nights ago while doing some WOT logs it started to miss badly at around 4k in 3rd and 4th gear. It felt like my turbo's were creating no boost for a second and then it would start to accelerate again and then cut out so on and so on. I thought maybe it was bad gas, so I went and filled up the tanked with 100. Last night I went and made a few runs and the same shit was going on. I am getting fed up with this car so far. It feels like something happens every other week.
Appreciate 0
      10-11-2011, 10:23 PM   #2
mithiral67
That guy
mithiral67's Avatar
120
Rep
5,740
Posts

Drives: 2015 Cayman GTS
Join Date: Jun 2008
Location: Chicago Burbs

iTrader: (4)

Garage List
tune and mod info would be helpful
Appreciate 0
      10-11-2011, 10:27 PM   #3
KyLu II
FREE DREAMK
Dominican Republic
164
Rep
9,321
Posts

Drives: the shiiit!
Join Date: Aug 2009
Location: Vineland, NJ

iTrader: (6)

Garage List
2011 Lexus LFA  [3.76]
Injectors?
__________________
Appreciate 0
      10-11-2011, 10:58 PM   #4
plague
Captain
plague's Avatar
42
Rep
957
Posts

Drives: 335i sold :( / jb 20th AE
Join Date: Mar 2011
Location: NJ

iTrader: (2)

what tune are you running. ive had similar experiences
__________________
07 335i- SOLD, and will be missed...

Parts for sale- PWM meth kit, M steering wheel, M shift knob, perforated e brake handle
Appreciate 0
      10-12-2011, 06:44 PM   #5
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

JB4 and DCI are the only mods, the reason I think I am so upset is that I don't have a clue what is causing it. No codes or nothing; it reminds me of my old 03 Cobra, long story short we never could get the fuel issues corrected and I ended up selling it.
Appreciate 0
      10-13-2011, 01:17 AM   #6
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

Here are some logs. WTF, this is Map 1, I am running over 16PSI and looks like my timing is dropping like crazy. I am scarred to do any more logs, my car is not under warranty and I don't feel like paying for a new engine. The second run is where it started having issues that were noticeable I started in second and went to Third gear, then I shut it down, you can see in third where it starts dropping boost and that is where the "falling on it's face happens". I have tried to set my maximum boost values to 14 psi with no luck. Also this is 91 octane.
Attached Images
 

Last edited by geterdone; 10-14-2011 at 12:36 AM..
Appreciate 0
      10-13-2011, 02:09 AM   #7
themyst
Major General
themyst's Avatar
South Korea
189
Rep
6,631
Posts

Drives: '16 MK7 GTI
Join Date: Feb 2009
Location: NYC

iTrader: (8)

The first log looks decent. I don't know what's happening on that 2nd log though, is your traction control off?
__________________
E90 LCI N54 6AT
Appreciate 0
      10-13-2011, 02:19 AM   #8
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

nope
Appreciate 0
      10-13-2011, 07:34 AM   #9
pimple
Private First Class
United_States
12
Rep
106
Posts

Drives: 335i N54
Join Date: Mar 2005
Location: .

iTrader: (0)

I wouldn't be surprised if you had a bad ignition coil. I had a few bad ones and what was consistent each time was that giving it WOT in 3rd or 4th gear from moderate speed would cause the engine to misfire (no codes until the coil failed completely). I ended up replacing all 6 plugs and coils while the 3rd coil was going bad.

http://www.e90post.com/forums/showpo...5&postcount=16

Last edited by pimple; 10-13-2011 at 07:53 AM..
Appreciate 0
      10-13-2011, 08:45 AM   #10
bryce
Banned
114
Rep
3,177
Posts

Drives: zhp 3-pedal
Join Date: May 2010
Location: texas

iTrader: (22)

Garage List
Quote:
Originally Posted by pimple View Post
I wouldn't be surprised if you had a bad ignition coil. I had a few bad ones and what was consistent each time was that giving it WOT in 3rd or 4th gear from moderate speed would cause the engine to misfire (no codes until the coil failed completely). I ended up replacing all 6 plugs and coils while the 3rd coil was going bad.

http://www.e90post.com/forums/showpo...5&postcount=16
+1
have been experiencing the same issues more or less. swapping coils with a new set next week, will update with results
Appreciate 0
      10-13-2011, 10:39 AM   #11
tscdennab
Banned
156
Rep
1,809
Posts

Drives: BMW 335i
Join Date: Oct 2010
Location: Europe

iTrader: (0)

Garage List
2008 BMW  [6.24]
Your logs look rather good, with one exception. Did you try the stock map, or removing the tune ?
Appreciate 0
      10-13-2011, 10:49 AM   #12
GreekMaverick
El Greco Capitan
GreekMaverick's Avatar
United_States
321
Rep
1,051
Posts

Drives: ///N54
Join Date: Dec 2006
Location: Wellington, FL

iTrader: (1)

Quote:
Originally Posted by pimple View Post
I wouldn't be surprised if you had a bad ignition coil. I had a few bad ones and what was consistent each time was that giving it WOT in 3rd or 4th gear from moderate speed would cause the engine to misfire (no codes until the coil failed completely). I ended up replacing all 6 plugs and coils while the 3rd coil was going bad.

http://www.e90post.com/forums/showpo...5&postcount=16
+1

Hi Bryce.....

COILS...I had the same exact thing, I would floor it and it would just stay there more or less with boost coming on after a couple seconds, BT tool showed a missfire on 6 also....I have the Procede, but the tune aside I replaced my coil on #6 and haven't had it since.
Attached Images
 
__________________
No, it's not new. It got 150.000+ miles on it
Appreciate 0
      10-14-2011, 12:02 AM   #13
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

I also tried with the JB4 removed and still was having problems. I was considering a bad coil as a possibility, but will the coil issues cause a check engine light or does it just store the code that only a BT Tool and other diagnostic equipment can read. I figured it would, but I am not getting any check engine etc. lights. Also best price, Tischer???

Last edited by geterdone; 10-14-2011 at 12:47 AM..
Appreciate 0
      10-16-2011, 02:45 AM   #14
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

Traction control was off, my belief is that since my car is over boosting and the ignition advance is retarding over 10~ it has caused me to fry a coil or blow a spark plug out. That could be the answer for the "missing"= (coil, spark plug or both). Also Terry said since the ecu is targeting over 10 psi it is causing throttle closure; he also said the overboost could be a wastegate issue or a boost solenoid? Any ideas for the overboost?? If its the wastegates, essentially I am F'ed, correct i.e. new turbos? Here are some of my CSV logs. Once again no codes, so I am throwing darts in the dark for now. Excuse the crappy csv file view. Thanks

RPM ECUPSI Boost Pedal IAT FuelEnr Throttle FuelPre IgnAdv DutyCyc DMEBT AFR
6062 2.1 9.4 100 82 79 70 18 0 38 1.4 13.6
5088 2.8 10.7 100 82 81 97 9 0 57 3 13.6
4814 6.2 13.9 100 84 83 99 12 4.1 58 5.5 16.5
5007 6.1 15.5 100 84 82 100 16 8.2 38 5.9 14.3
4946 6.7 14.9 100 84 83 100 17 9 40 6.6 13.6
4937 7.2 15.2 100 86 83 100 17 9.7 40 6.6 13.6
4975 8.7 16.1 100 86 82 100 17 9.7 51 7.5 13.6
5057 8.7 16.6 100 86 83 100 16 9 51 7.9 13.1
5106 8.4 15.6 100 86 83 95 16 8.2 38 8.1 12.4
5233 8.4 14.6 100 87 83 100 17 9 38 8.1 12.5
5233 8.4 14.6 100 87 83 100 17 9 38 8.1 12.5
5366 8.6 14.9 100 87 83 100 17 9 38 8.1 12.5
5366 8.7 15.3 100 89 83 100 16 8.2 38 8.1 12.6
5491 15.1 15.3 100 89 75 100 15 8.2 39 8.1 12.4
5529 14.5 15.1 100 91 75 29 7 9 33 8.2 12.8
5445 8.8 11.5 100 91 75 28 14 8.6 31 8.1 14
5639 6.9 8.3 100 91 75 61 8 9.3 50 8.1 12.2
5604 9.3 8.4 100 91 75 97 13 10.5 36 7.8 11.5
5705 11 10.7 100 93 75 43 13 9 30 6.8 14
5705 11 10.7 100 93 75 43 13 9 30 6.8 14
5738 8.7 9.7 100 93 75 40 11 9.3 31 7.2 12.7
5783 7.9 8.4 100 93 75 65 13 9.7 44 7.6 12.9
5839 10.2 9.2 100 93 75 97 10 9.7 36 7.6 12.5
5904 11.8 10.6 100 95 75 54 13 9 36 7.5 13.2
5904 10.9 11 100 95 75 37 10 10.1 27 7.3 13.2
5980 7.6 9.1 100 95 75 70 12 10.5 29 7.3 12.8
6015 7.1 7.3 100 96 75 98 11 10.8 36 7.1 12.5
6058 8.2 7.6 100 96 75 100 12 11.2 36 6.8 13.1
6087 9.3 8.5 100 96 75 63 11 11.6 34 6.6 13.1
6128 10.1 9.5 100 96 75 48 11 11.6 28 6.8 12.8
6159 9.3 9.5 100 96 75 41 11 11.6 27 6.6 12.5
6188 7.5 8.5 100 96 75 47 11 11.6 27 6.5 12.6
6213 6.7 7.4 100 98 75 66 11 11.6 36 6.6 12.6
6285 7.1 7.2 100 98 75 86 10 11.6 36 6.5 13
6320 9.3 8.7 100 98 75 61 11 11.6 36 6.5 13
6348 9.7 9.4 100 100 75 48 9 12.3 29 6.3 13
6383 8.2 8.9 100 100 75 43 10 12.3 25 6.3 12.5
6442 6.7 7.1 100 100 75 85 10 12.7 37 6.2 12.4
6442 6.7 7.1 100 100 75 85 10 12.7 37 6.2 12.4
6512 8.5 7.6 100 100 75 58 10 12.7 36 6 12.9
6536 8.6 8.4 100 102 75 47 9 11.6 27 6.2 12.7
6565 8.6 8.7 100 102 75 49 9 12.7 27 6 12.7
6596 6.6 7.2 100 102 75 63 10 12.7 37 6 12.5
6634 7.5 7.2 100 102 75 91 9 13.1 37 6 11.6
6658 8 7.7 100 102 75 63 11 13.1 31 5.9 11.6
6692 8.3 8 100 102 75 53 10 13.1 32 5.8 12.4
6735 7.6 7.8 100 102 75 52 10 13.1 29 5.8 13
6771 7.6 7.8 100 102 75 55 10 13.1 29 5.6 13
6798 6.7 6.9 100 102 75 59 9 13.8 32 5.6 12.5
6805 6.5 6.7 100 102 75 62 9 13.8 32 5.5 12.6
6827 6.6 6.7 100 104 75 65 10 13.8 31 5.3 13
6863 9.4 7.6 0 104 75 56 9 14.2 26 5.2 12.3
6863 9.4 7.6 0 104 75 56 9 14.2 26 5.2 12.3
6765 6 7 0 104 75 16 6 13.5 25 0 13
5256 4.2 5.1 0 104 75 6 6 6.3 69 0 13.9
4941 3.1 3.8 0 104 75 6 6 6.7 69 0 13.3
5014 2.5 2.8 0 104 75 7 5 5.6 70 0 13.1
4988 1.8 2.3 0 104 75 7 5 5.6 68 0 20
4956 1.5 1.7 0 104 75 8 5 5.6 68 0 20
4921 1.4 1.4 0 104 75 8 5 5.6 68 0 20

Last edited by geterdone; 10-16-2011 at 03:01 AM..
Appreciate 0
      10-17-2011, 03:37 AM   #15
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

Not many people are responding on this thread, but here is some info for others that may be having the same issue. One thing I noticed on the previous CSV exports was that when my ecu boost went over 8 psi (sometimes peaked above 15) throttle closure would take place; thus causing the "missing". So essential the ecu is saying no no.

Tonight I went ahead and disconnected my battery for a few minutes, I also set my lag fix to 35 instead of 80. I then went and did a run to see if this might have fixed anything; to my surprise the missing was gone or very minimal. When I got home I looked at CSV exports from tonight and saw that my ecu boost never went above 9psi and I had very little throttle closure; although my pre-boost was still way too high throughout the whole run, but somehow the ecu psi decreased. I know that a piggyback tune is suppose to fool the ecu psi, but my main question now is what caused the ecu psi to change or in general what controls ecu psi???

Once again my mod's are just a JB4 Map 1 and DCI running on 91 OCT. Also the weather was identical to the previous runs.
Attached Images
 
Appreciate 0
      10-17-2011, 11:16 PM   #16
geterdone
Private First Class
United_States
6
Rep
144
Posts

Drives: 2007 335i
Join Date: Mar 2011
Location: Yukon, Oklahoma

iTrader: (1)

I should of got a Cobb or Procede, seems like I must have one for anybody to respond.
Appreciate 0
      10-17-2011, 11:26 PM   #17
tibra1
Banned
No_Country
132
Rep
6,773
Posts

Drives: 2011 ZCP M3 - 2007 335i crashd
Join Date: Apr 2009
Location: NYC

iTrader: (4)

Why not contact Terry..hes always available to answer questions..
Appreciate 0
      05-05-2012, 01:42 PM   #18
BostonBeemah
Lieutenant
BostonBeemah's Avatar
Armenia
75
Rep
524
Posts

Drives: AW 135i 6spd
Join Date: Sep 2011
Location: Belmont, Ma

iTrader: (4)

Sorry to be bumping an old thread but I am having the same exact issues. Were you ever able to find out what the definitive cause was?? And info would help...
__________________
2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV
Best stock turbo 12.5 @ 19.46 spinning all the way down
RIP 2008 AW/BL 135i
Appreciate 0
      05-05-2012, 06:06 PM   #19
Stucks
Lieutenant Colonel
Stucks's Avatar
United_States
180
Rep
1,911
Posts

Drives: 2017 F30 340i Xdrive
Join Date: Oct 2010
Location: Montgomery County, MD

iTrader: (12)

It feels like hesitation when you go wot in 3rd gear. It happens on and off. Happens on my car about 40% of the time I go wot. It is either the coils or carbon buildup. Anybody know the best place to buy coils from online?
__________________
Current: 2017 F30 340i xdrive
Previous: 2008 e92 335i coupe: RB turbos, mach 116 race fuel, methanol, alot of boost.
Previous: 2003 Honda Accord V6 coupe: AEM V2, zex 75 wet shot (sold)
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:39 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST