Vishnu Pwm Methanol and its missing screws

garfi · 11-20-2011, 04:25 PM

My dealer installed it in front of my eyes. I am sure that all screws were %100 tightened. After 5k km of driving. I opened the hood to look something, I saw this.

As you see on the pictures, 3 of the 4 screws which hold and around the pump, were missing.
My advice to you is check it out sometimes.

Focus · 11-20-2011, 04:28 PM

So they prob came off while driving

Big Tom · 11-20-2011, 04:40 PM

The nyloc nuts was probably tighten to loose and the screw wasn't locked by the nylon collar insert, which is placed at the end of the nut.
A nyloc nut will not peel off if it's installed and tighten correctly.

garfi · 11-20-2011, 05:03 PM

Quote:

Originally Posted by Big Tom

The nyloc nuts was probably tighten to loose and the screw wasn't locked by the nylon collar insert, which is placed at the end of the nut.
A nyloc nut will not peel off if it's installed and tighten correctly.

As I understood from your expressions, it is a different part from the thing which is at the end of the screw (and tightened to the screw) as you can see it on the left top of the pump on the first picture.

But all of 4 screws came with same part as you can see on the left top of the pump on the first picture.
And I am sure that dealer tightened all of them again.

Now we renewed the missing screws and we polished with nail-polisher all of the nuts which are at the end of screws.

Bakeme521 · 11-20-2011, 05:18 PM

Off topic, but I have a question about the PWM meth kit.

I am about buy a kit form another member who never put it on his car and he sent me pictures of the set up just for verification and the pump in the kit he has is made by AEM. I thought the PWM kit used the aquamist pump? I am sure its all the same thing but I am curious about it. Can anyone shed some light on this for me?

Jeff@TopGearSolutions · 11-20-2011, 05:29 PM

Quote:

Originally Posted by Bakeme521

Off topic, but I have a question about the PWM meth kit.

I am about buy a kit form another member who never put it on his car and he sent me pictures of the set up just for verification and the pump in the kit he has is made by AEM. I thought the PWM kit used the aquamist pump? I am sure its all the same thing but I am curious about it. Can anyone shed some light on this for me?

Its all the same. The earlier Vishnu kits didnt get the fancy Vishnu sticker.

Bakeme521 · 11-20-2011, 05:32 PM

Quote:

Originally Posted by Jeff@topgearsolutions

Its all the same. The earlier Vishnu kits didnt get the fancy Vishnu sticker.

Yeah thats what I figured, thanks.

cn555ic · 11-20-2011, 05:48 PM

Some red loctite will help. The pump vibrates those screws when it's pumping and it will loosen the screws for sure. Like I said some loctite and let it dry will prevent this from happening

Tzu · 11-20-2011, 06:00 PM

Nylocks when threaded into the nylon portion, should not back off under general use.

11-20-2011, 04:25 PM	#1
garfi Private 2 Rep 89 Posts Drives: E93 335i Join Date: Aug 2008 Location: Turkey iTrader: (1)	Vishnu Pwm Methanol and its missing screws My dealer installed it in front of my eyes. I am sure that all screws were %100 tightened. After 5k km of driving. I opened the hood to look something, I saw this. As you see on the pictures, 3 of the 4 screws which hold and around the pump, were missing. My advice to you is check it out sometimes. Attached Images Last edited by garfi; 11-20-2011 at 04:45 PM..
	Appreciate 0 Tweet Quote

11-20-2011, 04:28 PM	#2
Focus Captain 68 Rep 942 Posts Drives: N/A Join Date: Apr 2010 Location: Jersey iTrader: (2)	So they prob came off while driving __________________
	Appreciate 0 Quote

11-20-2011, 04:40 PM	#3
Big Tom Banned 59 Rep 1,054 Posts Drives: 335i n54 e92 MT Join Date: Mar 2009 Location: Västerås iTrader: (0)	The nyloc nuts was probably tighten to loose and the screw wasn't locked by the nylon collar insert, which is placed at the end of the nut. A nyloc nut will not peel off if it's installed and tighten correctly.
	Appreciate 0 Quote

11-20-2011, 05:18 PM	#5
Bakeme521 Some say... 251 Rep 4,296 Posts Drives: Fresh Join Date: Mar 2010 Location: Baton Rouge n NOLA iTrader: (12) Garage List 2007 BMW 335i [8.24]	Off topic, but I have a question about the PWM meth kit. I am about buy a kit form another member who never put it on his car and he sent me pictures of the set up just for verification and the pump in the kit he has is made by AEM. I thought the PWM kit used the aquamist pump? I am sure its all the same thing but I am curious about it. Can anyone shed some light on this for me? __________________ I have exhaust and an intake...
	Appreciate 0 Quote

11-20-2011, 05:48 PM	#8
cn555ic 462 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Some red loctite will help. The pump vibrates those screws when it's pumping and it will loosen the screws for sure. Like I said some loctite and let it dry will prevent this from happening
	Appreciate 0 Quote

11-20-2011, 06:00 PM	#9
Tzu Lieutenant Colonel 29 Rep 1,551 Posts Drives: 335i Join Date: Jun 2010 Location: Toronto iTrader: (1)	Nylocks when threaded into the nylon portion, should not back off under general use.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search