|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Trying to buy swift springs need help
|
|
12-19-2011, 10:47 PM | #1 |
Banned
29
Rep 968
Posts
Drives: 2007 335i Coupe
Join Date: May 2011
Location: SF Bay Area
|
Trying to buy swift springs need help
Gents
I know this sounds stupid but I'm trying to buy Swift Custom springs off of the HP website but they don't list 400 front and 800 rear spring rate springs. They list spring rates slightly higher than 400/800. Is there some conversion. If I want 400/800 what ones off the site should I buy. I'm pairing with TC Kline double adjustable shocks and struts. KW rear threaded adjusters. So the springs should be as follows Front 400 rate. 60mm inside diameter. 7" tall Rear 800 rate. 60mm inside diameter and 9" tall But the site shows. 448/840 lbs per inch. Help wanna order tonight. Thanks gents. Ps have an email into Harold also but not sure if he will see it after hours. |
12-19-2011, 11:18 PM | #2 |
Colonel
166
Rep 2,556
Posts |
Wait until you talk to Harold if you're ordering from HPA
__________________
2007 E90 335i, TiAg, 6AT, ZPP, ZSP, ZCW, 6FL, HD
Quaife lsd, ETS fmic, GIAC s/w, Dinan intake/exhaust/oc, Koni/M3 susp, Apex Arc 8, Mich PSS |
Appreciate
0
|
12-20-2011, 02:03 AM | #3 |
Banned
29
Rep 968
Posts
Drives: 2007 335i Coupe
Join Date: May 2011
Location: SF Bay Area
|
Harold just emailed thanks Harold. The spring rates are 392/784 on his site if any one else is wondering.
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|