[Bagelfast]

Alright so im going for NY inspection, I have a fully catless exhaust and catless DP's..

Should i put the JB4 on map0 or leave JB4 on a map with autoclear on?

[Beemw335]

Yes, go in after long drive fully warmed up like that his ond will say good to go and he wont smell any excessive catless fumes lol

[bryce]

you need a dpfix to set readiness. jb4 autoclear needs to be disabled, as it will prevent readiness from being set, also. wire in a dpfix to the jb4 harness, turn off auto clear, put 50 miles on the car, then take to get inspected.

[themyst]

Originally Posted by 1LUMI335

Alright so im going for NY inspection, I have a fully catless exhaust and catless DP's..

Should i put the JB4 on map0 or leave JB4 on a map with autoclear on?

You're going to fail inspection as-is. You need to disable the JB4 on Map 0, and run an external DP fix and drive it for 50 miles or so. Ask me how I know.

[vasillalov]

Originally Posted by themyst

You're going to fail inspection as-is. You need to disable the JB4 on Map 0, and run an external DP fix and drive it for 50 miles or so. Ask me how I know.

+1!

CANCLEAR not equal to DPFIX!

[2wheelsrbetter]

glad i'm reading this! jb4 on the way and inspection due in spring, i was about to get rid of the dpfix - didn't think i'd need anymore. looks like i'll keep it.

[chili36]

This!

Originally Posted by themyst

You're going to fail inspection as-is. *You need to disable the JB4 on Map 0, and run an external DP fix and drive it for 50 miles or so. *Ask me how I know.

Not this..

Originally Posted by Beemw335

Yes, go in after long drive fully warmed up like that his ond will say good to go and he wont smell any excessive catless fumes lol