[jlev67]

I have a 2007 328xi coupe and just got the windows tinted and now the whole window/mirror control panel does not work. The passenger can still roll down their window using the control of the passenger side, but from the driver side I cannot roll down either window or adjust the mirrors. I checked the fuses and they are good, and all the plugs are plugged in. Any ideas?

Thanks,
Jaden

[kevin@bavarianx]

The driver side controls are plugged in? I can only think that the shop that tinted your windows didn't plug back in the controls when they took off the door panel.

[fdriller9]

Originally Posted by sales@bavarianx

The driver side controls are plugged in? I can only think that the shop that tinted your windows didn't plug back in the controls when they took off the door panel.

+1 or they didn't plug it in correctly. There is lever that needs to be clicked in.

Or they got water on it and fried it.

[jlev67]

Where is the lever? I didn't thoroughly look at where the controls were plugged in...just generally looked to make sure they were in, had no clue there was a lever.

[fdriller9]

Originally Posted by jlev67

Where is the lever? I didn't thoroughly look at where the controls were plugged in...just generally looked to make sure they were in, had no clue there was a lever.

I mean, you need to remove the door panel. And where the wiring harness connects to the window switch assembly, there's a locking lever to hold it in place. It's on the wiring harness connector.