|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
M V 2 wheels
|
|
06-06-2012, 07:45 AM | #2 |
Major General
197
Rep 6,110
Posts
Drives: Don't know yet!
Join Date: Jul 2007
Location: UK
|
They will fit John,but you'll need spacers to push them out.
The offset for the rear MV2 wheel is ET50,so a hubcentric spacer (Eibach/H&R) of 15mm would be safe,this will give you an offset of ET35. There is a possibility that a 20mm spacer would also work as the MV2 is a 8.5j wheel as opposed to a 9/9.5J. The offset for the front MV2 wheel is ET47,so I'd repeat the above,but the offset would become ET32,again a 20mm spacer might work as the front MV wheel is 8J. Teddy @: http://www.ssdd-motorsport.com/ is your best source,although I'd ring him,rather than order through his website. |
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|