[mapleridge]

Hi All,

Just a shot in the dark but would the performance bumper air ducts work to delete fog lights? I don't have fogs stock and would rather have ducts anyway. Just wondering if there is a solution out there.

[._.]

possibly. I just installed the brake duct and left the foglight area open. you cannot tell it is missing unless you get real close and put your head up there.

[mapleridge]

Originally Posted by R 4 5 T 4 M 4 N

possibly. I just installed the brake duct and left the foglight area open. you cannot tell it is missing unless you get real close and put your head up there.

Whoa whoa whoa. Back up the bus. Can you get a better picture with flash please?

You used the performance bumper brake ducts? What other pieces did you buy to make it fit?

[xquisit]

Bump, I would like to know as well; I have an LCI M sport bumper that I would like to fog delete and need to know what parts I need to purchase.

[PORTMOODY]

i've done the same as the picture shows. Just cut off the tabs for the fog light grills and left that area open.

[Mischa335i]

Originally Posted by PORTMOODY

i've done the same as the picture shows. Just cut off the tabs for the fog light grills and left that area open.

Can you please take a picture of that?

I got no air ducts now and it looks bad if you look closely :-/

Maybe the 335is air duct would fit with cutting ?

[RyanMv4]

More info pleaseeeee

[RyanMv4]

bump !

[idratherbesurfing]

Ill post pics if you want...i have a 09 335 e90 msport...i bought the 335is air ducts so i can delete the fogs....they DO NOT FIT. they are 2 INCHES. Too short. For the time being I uninstalled my fog lights and put the grills back in so it's just an open fog light hole

[Bours]

Originally Posted by idratherbesurfing

Ill post pics if you want...i have a 09 335 e90 msport...i bought the 335is air ducts so i can delete the fogs....they DO NOT FIT. they are 2 INCHES. Too short. For the time being I uninstalled my fog lights and put the grills back in so it's just an open fog light hole

Pics please .sounds good i want to tint them black or remove them im not sure yet

[Conti.]

Originally Posted by ._.

possibly. I just installed the brake duct and left the foglight area open. you cannot tell it is missing unless you get real close and put your head up there.

off topic side note: where did you get that lip from? vendor or eBay? i've been trying to find a cf one that didn't fit like poo.

[idratherbesurfing]

Originally Posted by Bours

Pics please .sounds good i want to tint them black or remove them im not sure yet

Im a idiot and i got pissed while i was doing this and deleted the pics of the duct in the bumper out of anger haha. I have 1 pic of me and my dad at the track but its not good...ill get a better one tomorrow...i will say it looks pretty cool and my oil tems are now 10* cooler with the fog light gone!! I would pop them out if i were you..tape up the fog light connections too!






I was actually thinking of doing something like..those turbo air funnels where the fogs used to be so its not a unfinished look and hopfully looks #racecar lol

[Bours]

Originally Posted by idratherbesurfing

Im a idiot and i got pissed while i was doing this and deleted the pics of the duct in the bumper out of anger haha. I have 1 pic of me and my dad at the track but its not good...ill get a better one tomorrow...i will say it looks pretty cool and my oil tems are now 10* cooler with the fog light gone!! I would pop them out if i were you..tape up the fog light connections too!






I was actually thinking of doing something like..those turbo air funnels where the fogs used to be so its not a unfinished look and hopfully looks #racecar lol

haha i like the idea ! sounds good with the oil temps being lower ! take mores pics please id like to see it tomorrow

[Bours]

still waiting for pics

[idratherbesurfing]

Originally Posted by Bours

still waiting for pics

Just left the track...ill have them up late. Sorry haha

[Bours]

Originally Posted by idratherbesurfing

Just left the track...ill have them up late. Sorry haha

ok bud ill check them out soon then how was it on the track ? lapping or drag strip ?

[idratherbesurfing]

[idratherbesurfing]

Originally Posted by Bours

ok bud ill check them out soon then how was it on the track ? lapping or drag strip ?

DRAG ...well im running e40 on stock clutch and lpfp LOL Also stock suspension so launching isnt too easy. times werent bad considering and i had fun which is most important

[Bours]

Originally Posted by idratherbesurfing

DRAG ...well im running e40 on stock clutch and lpfp LOL Also stock suspension so launching isnt too easy. times werent bad considering and i had fun which is most important

can i know your mods and your time ? also are you rwd or x drive ? the fog delete looks great but with grills it would look a little better because the empty holes i know are functional but its missing something if you know what i mean good looking car btw !

[idratherbesurfing]

2009 335i e90 m-sport Rwd

Vrsf 7inch
Fog light delete (cooler oil temps)
Er chagepipe/ synapse bov
Bms filters
Bms CC
N54tuning catless downpipes
Beluga racing catback (m2 replica)
MHD tune on e40 fuel
Bms short shifter
Bms Clutch delay valve



Best run was a 12.6 @117mph. I cant get a good 60ft with my suspension..too much wheel hop

[Agent11br]

Reviving as there aren't many threads on this topic for e90's with LCI Mtech.

Has anyone tried the M3 ducts? They look to be about the same size. Thanks idratherbesurfing for confirming hte 335is ones are too short, sorry you had to be the one to figure it out for all of us.

[idratherbesurfing]

Originally Posted by Agent11br

Reviving as there aren't many threads on this topic for e90's with LCI Mtech.

Has anyone tried the M3 ducts? They look to be about the same size. Thanks idratherbesurfing for confirming hte 335is ones are too short, sorry you had to be the one to figure it out for all of us.

Lol ecstuning is easy with returns luckily.

Nevet thought about the m3 ducts. But that bumper doesn't resemble ours at all