[E90Company]

Does the DCI install look wrong? I am thinking this because the accorion tube dousn't look right. I might just be paranoid?? Thanks

[diamondbimmer92]

The black intake piping should be all the way down into the accordian tubing. Pics are a little too close to tell, but it seems to be done correctly..

[E90Company]

Originally Posted by diamondbimmer92

The black intake piping should be all the way down into the accordian tubing. Pics are a little too close to tell, but it seems to be done correctly..

Yea, I'm just worried about the "bend" in the accordion tubing

[335(EX)(EYE)]

Originally Posted by E90Company

Yea, I'm just worried about the "bend" in the accordion tubing

dont worry to much bout the bend man, but hes right, the intakes coupling tube thing needs to be shoved into the intake a good amount and shoved into the accordion tubing pretty good,

is this vishnu or bms?

[E90Company]

Originally Posted by 335(EX)(EYE)

dont worry to much bout the bend man, but hes right, the intakes coupling tube thing needs to be shoved into the intake a good amount and shoved into the accordion tubing pretty good,

is this vishnu or bms?

Its the BMS intake. Do you think it's in enough? The car runs and sounds fine. IDK what to do lol

[E90Company]

Anyone Else?

[BQTuning]

Originally Posted by E90Company

Does the DCI install look wrong? I am thinking this because the accorion tube dousn't look right. I might just be paranoid?? Thanks

Dude, you got tones of locals near you like literally 10-15 minutes away from you that can help you with this. *********** is nearest to you that is good at this stuff. Post in the Florida section

[E90Company]

Originally Posted by BuraQ

Dude, you got tones of locals near you like literally 10-15 minutes away from you that can help you with this. *********** is nearest to you that is good at this stuff. Post in the Florida section

True. I just already have it in, and wanted to know if the bends are ok.

[BQTuning]

Originally Posted by E90Company

True. I just already have it in, and wanted to know if the bends are ok.

If you have an Android or Apple device install GroupMe app and shoot me the email you registered with so I can add you to the local mobile community. Post your pics there and *********** or someone etc can take a look at it if its normal or not if your not satisfied with the answers here.

[E90Company]

Originally Posted by BuraQ

If you have an Android or Apple device install GroupMe app and shoot me the email you registered with so I can add you to the local mobile community. Post your pics there and *********** or someone etc can take a look at it if its normal or not if your not satisfied with the answers here.

Ok. Thanks alot, will do.

[Gugs]

the install is fine. everything looks normal and the couplers do NOT need to go any futher down the accordion... it will yield no difference.

[#Tee]

Its fine, as long as the filter dont rub against other objects. You wont really be able to slide that cone down much further before it hits the air duct. Youll want that flexiblity from that plumbing.

[E90Company]

Ok, thanks guys. So, general rule is it's ok for the accordion piping to look bent a little?

[ConradConrad]

E90Company, hows the dci working out for you around town ? Getting heatsoaked at all or any delay in throttle when in traffic?

[E90Company]

Originally Posted by ConradConrad

E90Company, hows the dci working out for you around town ? Getting heatsoaked at all or any delay in throttle when in traffic?

So far so good. IAT's are higher than the stock airbox for sure, but I haven't noticed any delays or loss in power.

[idrift4wd]

Originally Posted by E90Company

Ok, thanks guys. So, general rule is it's ok for the accordion piping to look bent a little?

yup there is a slight oval shaped bent! looks normal to me, you do have to wiggle the coupler in there pretty hard. or else the two filter will have a hard time fitting. make sure you dont push your coupler to deep inside the filter!