[TT3 iN NyC]

Changes when I switch from map 0 to map 1 on PROcede.

Why does it change? You hear a tick sound when the maps are changed

[psmitty95]

Do you have the golf tee mod done? If not maybe map 1 switches the flapper to open that's just a guess though since i don't have procede

[zerep1]

Originally Posted by TT3 iN NyC

Changes when I switch from map 0 to map 1 on PROcede.

Why does it change? You hear a tick sound when the maps are changed

The wastegate position changes.. Changing the exhaust

[TT3 iN NyC]

Originally Posted by zerep1

The wastegate position changes.. Changing the exhaust

thanks!

[cn555ic]

Yes wastegate positioning effects the exhaust note big time. You should hear it when it in NA mode! lol

[jpsimon]

if you adjust WG postion down to 30 the exhaust will sound much deeper

[TT3 iN NyC]

Originally Posted by cn555ic

Yes wastegate positioning effects the exhaust note big time. You should hear it when it in NA mode! lol

ya, its crazy loud!! whoa! huge difference

Originally Posted by jpsimon

if you adjust WG postion down to 30 the exhaust will sound much deeper

cool, i'll try that. I like the deeper sound better. sounds more exotic.

Another question, when left on map 1, in park, do the wastegates keep adjusting every minute or so? For example, the exhaust note will be deep, then hear a tick, exhaust note changes for 3 seconds, another tick, and goes back to deeper tone.

[jpsimon]

Does that happen only during cold startups? If you set that wg position down the ticking should go away. it fixes all of my wastegate noise

[TT3 iN NyC]

Originally Posted by jpsimon

Does that happen only during cold startups? If you set that wg position down the ticking should go away. it fixes all of my wastegate noise

cold startup and if driven and then i put in park. only happens on Map 1, not map 0.

i will try and lower the WG value to 30%. What do you have yours set to?

[jpsimon]

I have pretty bad WG rattle, but with it set to 30 it gets rid of it completely

[Dmacc]

Originally Posted by jpsimon

I have pretty bad WG rattle, but with it set to 30 it gets rid of it completely

really? it's the opposite for me, 90% makes it sound way better, 30% makes the rattle sound really nasty

[jpsimon]

depends on the state of the wastegates. everyones are different, 40 and below fix it for me

[Dmacc]

Originally Posted by jpsimon

depends on the state of the wastegates. everyones are different, 40 and below fix it for me

ahh I see, gotcha