How much hp and torque can the OEM cluth hold?

Bimmer.335i. · 11-12-2012, 09:43 AM

Just wondering how much torque can the oem clutch and a 335i hold? I just had it replaced and was wondering if i got a tune if it would be able to hold the power?

Redrkt503 · 11-12-2012, 09:48 AM

I don't know the exact number but I've been Full bolt on for about 15,000 miles so far with no clutch problems, and I started modding at 89,000 miles

jdbretz · 11-12-2012, 09:56 AM

It really depends on how you drive. I wouldn't worry about it with just a tune. It should hold just fine at those power levels. I have 73000 miles on my stock clutch and I am FBO+Meth. It just recently started slipping in higher gears, but I never really did hard launches on it.

nitehawk · 11-12-2012, 09:57 AM

Mine started to slip on occasion >450wtq. Anything less, you should be okay.

Fully_Bolted · 11-12-2012, 10:05 AM

Quote:

Originally Posted by nitehawk

Mine started to slip on occasion >450wtq. Anything less, you should be okay.

Agreed.

Xander · 11-12-2012, 10:31 AM

Quote:

Originally Posted by nitehawk

Mine started to slip on occasion >450wtq. Anything less, you should be okay.

Mine too, that seems to be about the number. Cold days, getting on it at under 3000 rpm in 3rd or 4th gear, to really let the boost build up, and it would slip.

x...

Rotary Rasp · 11-12-2012, 11:14 AM

I'm at about 500wtq with 55k miles and I've only my stock clutch slip once on the highway when I was passing someone is 6th gear.

The stock clutch is pretty strong..... for stock.

uniter · 11-12-2012, 11:21 AM

Mine started slipping at 50k FBO on pump. FBO for 2k (owned for that long.)
Slipping started during a 150mile trip driving with excellence in 6th gear. It'll stand up to FBO for short hops, but prolonged driving / track duty will see it begin to fail.

Bimmer.335i. · 11-12-2012, 12:31 PM

Thanks everyone for the input. I just had the clutch replaced and i was regretting not going with something that can handle more power but im not planning on doing a single turbo or anything so i should be fine. Thanks

Redrkt503 · 11-12-2012, 01:21 PM

Enjoy the new clutch!

Bimmer.335i. · 11-13-2012, 09:05 AM

Quote:

Originally Posted by zanelefko

Enjoy the new clutch!

i will for sure

eric@helix · 11-13-2012, 10:32 AM

Quote:

Originally Posted by jdbretz

It really depends on how you drive.

This.

slostjoe · 11-14-2012, 12:18 PM

450wtq is when mine started slipping. If I go to a less agressive map it doesn't do it. Like previously stated its all about how it's driven.

11-12-2012, 09:43 AM	#1
Bimmer.335i. Private First Class 12 Rep 166 Posts Drives: 2007 E92 335i 6MT Join Date: Jun 2012 Location: Toronto, ON iTrader: (0) Garage List 2007 BMW335i [0.00]	How much hp and torque can the OEM cluth hold? Just wondering how much torque can the oem clutch and a 335i hold? I just had it replaced and was wondering if i got a tune if it would be able to hold the power? __________________ E92 335i // Space Grey on Coral Red // Muffler Delete // Blackline Trim // BMS DCI // JB4 // VRSF 7'' Intercooler // H&R Sport springs // Matte Grill // Michelin Pilot Super Sports
	Appreciate 0 Tweet Quote

11-12-2012, 09:48 AM	#2
Redrkt503 Lieutenant 31 Rep 439 Posts Drives: E92 335is Join Date: Jan 2012 Location: Ft. Lauderdale, FL iTrader: (0)	I don't know the exact number but I've been Full bolt on for about 15,000 miles so far with no clutch problems, and I started modding at 89,000 miles __________________ 2011 335is "Redrkt" 6 MT DocRace 6266 Single Turbo - Fuel it stage 3 LPFP - Fuel it PI - spec stage 3+ clutch - mfactory SM flywheel - 100% E85 - VRSF 7.5" intercooler - VRSF charge pipe w/ HKS BOV - JB4 - MHD back end flash 768 whp 695 ft lbs - E85 - 32PSI
	Appreciate 0 Quote

11-12-2012, 09:56 AM	#3
jdbretz Captain 56 Rep 923 Posts Drives: '18 X5d, '12 M3 ZCP, '12 F30 Join Date: Dec 2010 Location: FL Panhandle iTrader: (10)	It really depends on how you drive. I wouldn't worry about it with just a tune. It should hold just fine at those power levels. I have 73000 miles on my stock clutch and I am FBO+Meth. It just recently started slipping in higher gears, but I never really did hard launches on it.
	Appreciate 0 Quote

11-12-2012, 09:57 AM	#4
nitehawk Lieutenant Colonel 111 Rep 1,909 Posts Drives: e92 335i 6MT Join Date: May 2011 Location: Toronto iTrader: (15) Garage List E92 BMW 335i [9.00] E92 BMW 335i \| Retired [10.00]	Mine started to slip on occasion >450wtq. Anything less, you should be okay.
	Appreciate 0 Quote

11-12-2012, 11:14 AM	#7
Rotary Rasp Lieutenant Colonel 242 Rep 1,857 Posts Drives: 2009 E92 335i 6MT Join Date: Aug 2008 Location: SoCal - Torrance iTrader: (6)	I'm at about 500wtq with 55k miles and I've only my stock clutch slip once on the highway when I was passing someone is 6th gear. The stock clutch is pretty strong..... for stock. __________________
	Appreciate 0 Quote

11-12-2012, 11:21 AM	#8
uniter Black on Black on Black. 44 Rep 532 Posts Drives: 335i/6mt Sport,Nav,Prem. Join Date: Feb 2010 Location: New Hope, PA iTrader: (1)	Mine started slipping at 50k FBO on pump. FBO for 2k (owned for that long.) Slipping started during a 150mile trip driving with excellence in 6th gear. It'll stand up to FBO for short hops, but prolonged driving / track duty will see it begin to fail. __________________ LEMANS BLUE M-TECH E92->PROCEDE REV3::BIEHNTUNE FLASH::ETS 7" FMIC::RACELAND DPS::OS GIKEN 1.5 WAY::DEFIV DIFF LOCKDOWN::DEFIV OCC::DEFIV INTAKE::RB PCV
	Appreciate 0 Quote

11-12-2012, 12:31 PM	#9
Bimmer.335i. Private First Class 12 Rep 166 Posts Drives: 2007 E92 335i 6MT Join Date: Jun 2012 Location: Toronto, ON iTrader: (0) Garage List 2007 BMW335i [0.00]	Thanks everyone for the input. I just had the clutch replaced and i was regretting not going with something that can handle more power but im not planning on doing a single turbo or anything so i should be fine. Thanks __________________ E92 335i // Space Grey on Coral Red // Muffler Delete // Blackline Trim // BMS DCI // JB4 // VRSF 7'' Intercooler // H&R Sport springs // Matte Grill // Michelin Pilot Super Sports
	Appreciate 0 Quote

11-12-2012, 01:21 PM	#10
Redrkt503 Lieutenant 31 Rep 439 Posts Drives: E92 335is Join Date: Jan 2012 Location: Ft. Lauderdale, FL iTrader: (0)	Enjoy the new clutch! __________________ 2011 335is "Redrkt" 6 MT DocRace 6266 Single Turbo - Fuel it stage 3 LPFP - Fuel it PI - spec stage 3+ clutch - mfactory SM flywheel - 100% E85 - VRSF 7.5" intercooler - VRSF charge pipe w/ HKS BOV - JB4 - MHD back end flash 768 whp 695 ft lbs - E85 - 32PSI
	Appreciate 0 Quote

11-14-2012, 12:18 PM	#13
slostjoe NEWBICON 17 Rep 304 Posts Drives: E92 335is Join Date: Jul 2012 Location: Springfield, MO iTrader: (6)	450wtq is when mine started slipping. If I go to a less agressive map it doesn't do it. Like previously stated its all about how it's driven. __________________ 2013 Race Red GT500 708whp www.cmsmotorsports.com
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search