[Thorium]

Does anyone know aftermarket full range amp that take high level input? like mono amp from JL600/1. Or it have to go through a signal processors like the JL cleansweap , audiocontrol LC7i for example. Im looking to do amp upgrade to drive L7 speaker,without cutting any wire. I also notice that Technic sell sub harness that would come in handy, as i can cut it wire to rca input. Any input will be great.

[ctuna]

Do not cut wires use T taps if necessary.

[kaigoss69]

Originally Posted by Kygiabao

Does anyone know aftermarket full range amp that take high level input? like mono amp from JL600/1. Or it have to go through a signal processors like the JL cleansweap , audiocontrol LC7i for example. Im looking to do amp upgrade to drive L7 speaker,without cutting any wire. I also notice that Technic sell sub harness that would come in handy, as i can cut it wire to rca input. Any input will be great.

What is your goal? Unless you want the capability to go crazy loud, one of the easiest and best sounding upgrades for the money would be the addition of a JBL MS-8 which will handle amplification of the OEM speakers, processing of the signal, time alignment, EQ, and provide and RCA out for your sub amp.

[Thorium]

Im looking to get the signal from oem amp to an after market amp, then back to the existing wired to drive the speaker. If that is possible. Since i cant replace L7 amp.

[ctuna]

Its possible but a bad idea for anything but a sub.
You actually can replace the L7 amp a lot of people do it .
You can do it with a mobridge da2 pre amp or a lot of people reprogram there radio to Hi Fi output
and use and ms-8 and some combination of amps and speakers.
A mobridge da2 pre amp will accept the fiberoptic
output of the L7 head unit as it is.

[Thorium]

Thanks a ton guys