|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Overboost problem, all jb4 maps
|
|
03-18-2013, 08:46 PM | #1 |
WILL
33
Rep 496
Posts |
Overboost problem, all jb4 maps
Ok so I've looked up everyone's over boost problem and Terry contacts them and they email him the logs but don't ever put what the solution to their problem was. So I'm asking for help, and this time ill post the solution to my problem so other people can just read it.
So E90 DCI, DPs, Exhaust, JB4. In all gears boost levels go to the moon and hold. Only in gears after 3rd I throw codes and go into stock boost mode. Codes are typical overboost code and low boost mode engaged. I can repeat what happens all the time. Now could it be the following? A). Boost solenoids are bad. B). Turbos are bad. C). Waste Gates are stuck. D). Vacuum line leak. Remember this happens in all maps. Even with JB4 turned off. Feel free to pm me. Thanks |
03-18-2013, 09:28 PM | #2 |
Second Lieutenant
12
Rep 281
Posts
Drives: 2007 E92 335i
Join Date: Oct 2012
Location: Indianapolis
|
so... did you email Terry?
__________________
07 E92 335I | JB4 G5 ISO | BMS E85 Flash | DCI | BMS DPs | Helix FMIC | Alpina TCU Flash | Walbro GLS392 | E70 | 429rwhp/474rwtq
| |
Appreciate
0
|
03-18-2013, 11:30 PM | #3 | |
WILL
33
Rep 496
Posts |
Quote:
|
|
Appreciate
0
|
03-19-2013, 10:32 AM | #5 | |
WILL
33
Rep 496
Posts |
Quote:
Thoughts anyone? |
|
Appreciate
0
|
03-19-2013, 10:46 AM | #6 |
Captain
41
Rep 823
Posts |
if its happening with the JB4 off its not the JB4.. Remove the JB4 completely and see how it goes... If you are experiencing the same issue you have a separate software/hardware problem, which will probably require a dealer/indy visit.
If you have a warranty left on the car or rather CPO i'm guessing at this point your warranty dosen't just fly out the window because you have bolt ons the problem has to be related to the bolt on. They won't test your fuel unless they suspect the issue is fuel related. |
Appreciate
0
|
03-19-2013, 12:19 PM | #7 |
Lieutenant
36
Rep 414
Posts |
"A"...try new selenoid...same problem two years ago..
__________________
'08 BMW 335xi // Sedan // Black Sapphire // Sports Package//Mods: JB3 2.0|Unlocked 18ohm Board|BMS Meth Kit|AA Speed Delimiter|BMS tuning gauge|UR CL DP |BMS DCI|AA Exhaust|Helix fmic|CDV|H&R coilover| 10mm Spacers H&R on 4 wheels|**Record for XI's on dragtimes.com, 11.768s@118.70**Top speed 186,4 mph GPS, vbox 60-130mph at 10.18
|
Appreciate
0
|
03-19-2013, 06:21 PM | #8 | |
WILL
33
Rep 496
Posts |
Quote:
As for my warranty... Nope no mo. I have 107k on my car. I travel a lot lol. But instead of taking it to the dealer if rather ask people that actually work on their cars no just take it to the dealer, waste of money. Thanks for your advice though. <---- that's not sarcastic tone by the way. |
|
Appreciate
0
|
03-19-2013, 11:04 PM | #9 |
WILL
33
Rep 496
Posts |
So went through the car, waste gates aren't stuck and vacuum lines are where they are suppose to be. Now I'm going to order some new solenoids.
|
Appreciate
0
|
03-19-2013, 11:13 PM | #10 |
Captain
628
Rep 787
Posts |
If you posted a log of the event it might help, but the boost control solenoids is a decent guess, especially at 107K. I replaced mine recently at about 55K and they were definitely not functioning nominally based on some testing I did with the mighty vac.
|
Appreciate
0
|
03-20-2013, 04:53 AM | #11 | |
WILL
33
Rep 496
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|