[Keebs64]

I have BMW Standard Tools 2.11 installed, and I have SPDatenV49 downloaded.

All of the DIYs say to update the following directories (which I have done):

c:\NCSEXPER\SGDAT
c:\NCSEXPER\DATEN\E89
c:\EDIABAS\Ecu

Do I need to do anything with the other data/folders from SPDatenV49? i.e.- \cfgdat, \data, \format, \kmmData

It seems like these other folders are important, since that is where the bulk of the 11gb of data resides.

Thanks!

[pweber84]

Standard tools 2.12 is the newest, works with Win 7.

DATA folder weights a lot, it is for updating your modules, you can import it to WinKfp as Assembly line data. Nothing else is important for you.

[Keebs64]

Originally Posted by ******84

Standard tools 2.12 is the newest, work with Win 7.

DATA folder weights a lot, it is for updating your modules, you can import it to WinKfp as Assembly line data. Nothing else is important for you.

Thanks.

I'm guessing I'll need to use the files in the DATA folder with WinKfp, since one of my first tasks will be to program a replacement right AHL module (SMC control unit) to my car.

Do you know of any DIYs for that process?

[pweber84]

You mean frm module? Did you replace the module because was broken or on the newer one? Or you want to change it from frm1 to frm2?

[Keebs64]

Originally Posted by ******84

You mean frm module? Did you replace the module because was broken or on the newer one? Or you want to change it from frm1 to frm2?

No. My frm1 is original, and does not need any work.

I replaced my control unit for the Adaptive Curve Lighting (BMW# 63127189312), and the new unit is uncoded.

Apparently, I need to program/code the new unit to the car (vin#) in order for it to function properly & recognize all of the correct movement limits for the motors it controls.

[yEBMW]

I am also interested on how to program a ahl module. I did a halogen to euro lci ahl xenon conversion and I can't get the ahl modules to show in ncs exper. I think this is why my xenon projectors aren't facing straight.

Do they need to be coded some how?

I swapped pin 5 and 6 on the actual headlights in order to get the shutter to work for the xenons but I wonder now if I wasn't supposed to do that. Cause my cornering lights aren't working even after coding.

Sorry not trying to thread jack but I will also need to do some of the same coding as the OP. But I have installed a frm2 coming from a FRM1.

[Keebs64]

Here's my update:

I have everything installed (fresh install, 1st time), and all of the data files are moved to the correct directories.

When I open INPA to do the compatability check, I show the two black circles. This tells me that the hardware is working properly. Although, I have no chassis options (F2-F10) to choose from.

I can manually update the INPA.ini file to show the chassis options, but when I do that & select E89, I get the error 'Couldn't find E89 configuration file, E89.eng'.

The install was BMW Standard Tools, from a disk, full install, all options.

I updated the three directories listed above with the V49 daten... is there something in INPA that I need to update and/or configure?

Thanks.

EDIT: Here is the actual error message ""Couldn't find INPA configuration file C:\EC-APPS\INPA\BIN\..\cfgdat\E89.ENG" I searched through the install, and through the V49 daten, and I couldn't even find a file with that name.

[pweber84]

Originally Posted by Keebs64

Here's my update:

I have everything installed (fresh install, 1st time), and all of the data files are moved to the correct directories.

When I open INPA to do the compatability check, I show the two black circles. This tells me that the hardware is working properly. Although, I have no chassis options (F2-F10) to choose from.

I can manually update the INPA.ini file to show the chassis options, but when I do that & select E89, I get the error 'Couldn't find E89 configuration file, E89.eng'.

The install was BMW Standard Tools, from a disk, full install, all options.

I updated the three directories listed above with the V49 daten... is there something in INPA that I need to update and/or configure?

Thanks.

Looks like CFGDAT files in INPA folder are missing. It has nothing to do with spdaten.

[Keebs64]

Originally Posted by ******84

Looks like CFGDAT files in INPA folder are missing. It has nothing to do with spdaten.

That's strange. I don't understand how they could be missing if it was a full install.

How do I get/find them? Can they be copied from someone elses install, or should I try to find a different version of BMW Standard Tools to install?

Thanks.

[pweber84]

Originally Posted by Keebs64

That's strange. I don't understand how they could be missing if it was a full install.

How do I get/find them? Can they be copied from someone elses install, or should I try to find a different version of BMW Standard Tools to install?

Thanks.

What version do you use?

Check the contain of INPA/CFGDAT there should be about 50 files. I don't know what is the version of your INPA.

[nate5ks]

Every time I've installed a new version of standard tools I've used the INPA cfgdat files from INPA 502 and it's worked fine, do you have that version? For whatever reason the new versions don't have all the cfgdat files. The link for bmwst 2.12 on page 5 or 6 of the NCSEXPER errors sticky thread also has the cfgdat files, you can download that.

[Keebs64]

Originally Posted by ******84

What version do you use?

Check the contain of INPA/CFGDAT there should be about 50 files. I don't know what is the version of your INPA.

INPA 5.00 from the .INI file.

I definitely don't have 50 files in the INPA/CFGDAT folder. Attached are screen shots of both.

[pweber84]

PM sent.

[Keebs64]

Originally Posted by ******84

PM sent.

Thanks again!

I'll try it when I get home tonight & let you know how everything works.

[pweber84]

No problem. Everything should be fine now.

[mjr]

Has anybody got the light version of the V49 files? All I need are the SGDAT, Daten and ECU folders

[pweber84]

Originally Posted by mjr

Has anybody got the light version of the V49 files? All I need are the SGDAT, Daten and ECU folders

PM sent.

[mjr]

Originally Posted by ******84

PM sent.

Thank you

[hgw512]

[mmlcrisis]

Little clarification please. You say work with Win7, I assume you mean it will work with Win XP or Win 7. Correct?

[QUOTE=******84;13740585]Standard tools 2.12 is the newest, work with Win 7.

[Slickascanbe]

Originally Posted by ******84

PM sent.

pweb, think you can help me out with the same issue? i think my Daten is outdated, went back to the dealer and it looks like they upgraded my system. going from V41 to V49 should be the remedy to the problem.

[pweber84]

[QUOTE=mmlcrisis;14053159]Little clarification please. You say work with Win7, I assume you mean it will work with Win XP or Win 7. Correct?

Originally Posted by ******84

Standard tools 2.12 is the newest, work with Win 7.

Yes, it will work with Win7/8 32&64 bit and also WinXP