how to remove shark fin?

cyba · 10-06-2007, 08:07 AM

Is it done from inside the car?

txusa03 · 10-07-2007, 03:33 PM

I am curious as well! Anyone?

1clean335i · 10-07-2007, 04:38 PM

Why do you want to take it off? Theres an antenna that protrudes through the roof which is why the shark fin is there.....

But anyway, some painters tape on the roof around the shark fin, a heat gun, and a plastic wedge is how I take it off... You have to be really careful not to dent the roof

txusa03 · 10-08-2007, 03:38 PM

coz i heard sharkfins are really tasty

cyba · 10-09-2007, 12:10 AM

Quote:

Originally Posted by 1clean335i

Why do you want to take it off? Theres an antenna that protrudes through the roof which is why the shark fin is there.....

But anyway, some painters tape on the roof around the shark fin, a heat gun, and a plastic wedge is how I take it off... You have to be really careful not to dent the roof

thanks i just wanted to make sure its removed from the top. Are the fins held on with adhesives?

cyba · 10-09-2007, 12:11 AM

Quote:

Originally Posted by txusa03

coz i heard sharkfins are really tasty

they sure are

techkeith · 10-31-2007, 10:24 PM

Hey man, sorry about responding a bit late, I have had to remove a few of them, you need a few tools, some tools from windshield removal. They are held on with polyurathane glue, same stuff for the windshield, you start from the back of the fin, and once you get that going you can run the blade up the side, if you want some pictures pm me and I will get some to you, its a reall hassele to do this and you run a huge risk of seriosly damaging the paint or body, but if you want some pics of the tools and how to do it ill send them.

txusa03 · 11-02-2007, 04:17 PM

Quote:

Originally Posted by techkeith

Hey man, sorry about responding a bit late, I have had to remove a few of them, you need a few tools, some tools from windshield removal. They are held on with polyurathane glue, same stuff for the windshield, you start from the back of the fin, and once you get that going you can run the blade up the side, if you want some pictures pm me and I will get some to you, its a reall hassele to do this and you run a huge risk of seriosly damaging the paint or body, but if you want some pics of the tools and how to do it ill send them.

Yeah, sounds like something we should stay clear off (just like the great white).

TGIM · 07-01-2012, 09:25 AM

I know this is an old post but I wanted to wrap the phin in carbon fiber and I can't imagine doing it while the phin is on the car!

10-06-2007, 08:07 AM	#1
cyba Lieutenant General 954 Rep 14,371 Posts Drives: beast Join Date: Aug 2007 Location: everywhere iTrader: (353)	how to remove shark fin? Is it done from inside the car?
	Appreciate 0 Tweet Quote

10-07-2007, 03:33 PM	#2
txusa03 Major General 577 Rep 6,563 Posts Drives: TS330iPPSP6MT Join Date: Jul 2005 Location: Planet Earth iTrader: (3)	I am curious as well! Anyone? __________________ under construction!
	Appreciate 0 Quote

10-07-2007, 04:38 PM	#3
1clean335i Perf BMW mag issue 147, 159 431 Rep 6,799 Posts Drives: Project Estoril Join Date: Feb 2007 Location: Miami, FL iTrader: (31) Garage List 2013 335i M-sport [0.00] 2011 X5 xdrive35i M ... [0.00] 2009 335i M-sport [0.00] 07' 335i Sedan [0.00]	Why do you want to take it off? Theres an antenna that protrudes through the roof which is why the shark fin is there..... But anyway, some painters tape on the roof around the shark fin, a heat gun, and a plastic wedge is how I take it off... You have to be really careful not to dent the roof __________________ '13 Estoril Blue 335i M-sport *Don't PM me!* Message me here- http://www.facebook.com/ProjectEstoril
	Appreciate 0 Quote

10-08-2007, 03:38 PM	#4
txusa03 Major General 577 Rep 6,563 Posts Drives: TS330iPPSP6MT Join Date: Jul 2005 Location: Planet Earth iTrader: (3)	coz i heard sharkfins are really tasty __________________ under construction!
	Appreciate 0 Quote

10-31-2007, 10:24 PM	#7
techkeith New Member 4 Rep 24 Posts Drives: 2007 335i, MT, Sport, Priem, Join Date: Aug 2007 Location: swfl iTrader: (0)	Hey man, sorry about responding a bit late, I have had to remove a few of them, you need a few tools, some tools from windshield removal. They are held on with polyurathane glue, same stuff for the windshield, you start from the back of the fin, and once you get that going you can run the blade up the side, if you want some pictures pm me and I will get some to you, its a reall hassele to do this and you run a huge risk of seriosly damaging the paint or body, but if you want some pics of the tools and how to do it ill send them.
	Appreciate 0 Quote

07-01-2012, 09:25 AM	#9
TGIM Enlisted Member 2 Rep 48 Posts Drives: 2006 330i e90 Join Date: May 2012 Location: Phoenix AZ iTrader: (0)	I know this is an old post but I wanted to wrap the phin in carbon fiber and I can't imagine doing it while the phin is on the car!
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search