[teaston]

So my car came with bluetooth, no usb, just a normal mulf2 with professional hu.

I've bought a mulf2 high basis svs to add usb and i was trying to get it working but no luck. I haven't bought the retrofit kit or any parts of it, was just plugging the mulf in to see if i could get bluetooth on it first. I tried all the things suggested in many threads including adding 6FL to vo, then fa write to cas & nfrm, sg_reset rad2, sg_codeiren rad2, code whole car, sg_reset whole car, then tried all again with revtor's expert profile, tried leaving car for 20 mins but still just - - above tel.

So i gave up and put my old mulf back, but now bluetooth doesn't work!!

I've done everything in reverse i.e. remove 6fl from vo, code modules, code whole car, sg_reset whole car and indv modules, with with fswpswman profile & revtor's but still - - above tel!

Please, please, please can somebody tell me how to get my bt back??

**SOLVED** i had messed up the most loop when fitting DAB retrofit! There must have been 2 problems though as it stopped working before i fitted the DAB!

[xelion]

Reset your radio using INPA.

[teaston]

Do you mean clear error codes?

[xelion]

No, I mean that you can open INPA, go to your radio, and click there RESET Shift + F9 or something like this.

[teaston]

Right i see, i'll try that when i get home thanks!

[teaston]

I did the reset but it has made no difference.
Any other ideas, anyone, please?