[Raptor04]

Can anyone who knows what to look for in these data logs please review my E40 log @

http://www.datazap.me/u/raptor001/e40-log-0?1-2-3

Thanks in advance for any feedback on how this looks.

[WedgePerformance]

Looks good other than the timing event at 5800. Might want to up the E85 mix by a Gal or two. Trims drop neg up top, but nothing major. Probably drop your scalar back .05 to see if that brings them within +/- 10.

Main issue, WGDC (base)... Need to increase WGDC to hit targets up top. Without the right logs you're shooting in the dark.

[Raptor04]

Thank you. What do you mean, I am shooting in the dark without correct logs? So trims should remain +/- 10?

[Allen@MOTIV]

I see just a couple issues. Overboosting down low and a little below target up top. Timing takes a hit but with just one cylinder available to log it's impossible to say how bad it really is.

More ethanol should help out timing. However, the boost control is going to take a little more work. Use the base table to calm the overboost down and use the adder to table to get you closer to target up top.

[135Pats]

Is this OFT? Can you log WGDC?

[Raptor04]

It is OFT....I don't know if OFT has that option. I used the default datalog option. I'm not sure if there's a way to change what can be logged. I'm very new to tuning.

[WedgePerformance]

Originally Posted by 135Pats

Is this OFT? Can you log WGDC?

I poked Shiv a few months back about getting that added, but no ETA.

[WedgePerformance]

Originally Posted by Raptor001

It is OFT....I don't know if OFT has that option. I used the default datalog option. I'm not sure if there's a way to change what can be logged. I'm very new to tuning.

If you want to shoot me your bin, I can make a few small changes that might help. WedgePerformance at Gmail.

[135Pats]

Originally Posted by WedgePerformance

I poked Shiv a few months back about getting that added, but no ETA.

Wow that sucks they can't log it

[WedgePerformance]

Originally Posted by 135Pats

Wow that sucks they can't log it

(135Pats)> <(OFT)

[Raptor04]

Do you think that the altitude has something to do with actual boost not reaching target boost? I'm at 6K ft. above sea level, and I'm thinking the turbos maybe taking longer to spool at this altitude. Thus the reason for not hitting target boost down low. I'm not sure why I wouldn't be hitting target boost up high though. What would cause that?

[Raptor04]

What kind of corrections should I be making in the base and adder tables to correct over and under boost?