e90 Mtech install

Park828 · 11-06-2007, 05:36 PM

for all those that have installed the m tech kit on the e90...

where do those little extra fins we had to buy go? also the fender liner for the kit doesn't come with oil cooler cut out. do i just cut it out of the one that comes with the kit or do i have to buy one for 335 with oil cooler?

Thank you!

roller84 · 11-06-2007, 10:11 PM

Quote:

Originally Posted by Park828

also the fender liner for the kit doesn't come with oil cooler cut out. do i just cut it out of the one that comes with the kit or do i have to buy one for 335 with oil cooler?

I'd like to know this too. Is there a separate part number for cars equipped with oil cooler?

EuroBlu · 11-08-2007, 07:28 PM

You have to get these parts extra to the M kit for an e90 335i with an oil cooler....

51-11-8-044-638 Support
51-74-8-044-594 Air duct
51-12-8-043-239 Rear diffuser
51-71-8-044-575 Muffler heat shield
51-71-8-044-576 Muffler heat shield

my body shop was able to stick with the original fender liner for the side with the oil cooler.

roller84 · 11-08-2007, 07:36 PM

Quote:

Originally Posted by EuroBlu

You have to get these parts extra to the M kit for an e90 335i with an oil cooler....

51-11-8-044-638 Support
51-74-8-044-594 Air duct
51-12-8-043-239 Rear diffuser
51-71-8-044-575 Muffler heat shield
51-71-8-044-576 Muffler heat shield

my body shop was able to stick with the original fender liner for the side with the oil cooler.

Do you know what the support is for or what it looks like?

EuroBlu · 11-16-2007, 01:12 AM

when you buy the aero kit you'll get two support pieces like this that fit behind the vents and fogs. The 335i support that you'll swap out on the passenger side has a cut out for filter.

1clean335i · 11-16-2007, 07:16 PM

Quote:

Originally Posted by EuroBlu

when you buy the aero kit you'll get two support pieces like this that fit behind the vents and fogs. The 335i support that you'll swap out on the passenger side has a cut out for filter.

can you pm me some pics of your car with the kit??? looks really good in that sig picture but i can barely see it.

roller84 · 11-16-2007, 11:24 PM

Quote:

Originally Posted by EuroBlu

when you buy the aero kit you'll get two support pieces like this that fit behind the vents and fogs. The 335i support that you'll swap out on the passenger side has a cut out for filter.

What filter is this for?

Kev · 11-16-2007, 11:46 PM

I have two extra pieces of black plastic trims that I don't know where to put. I'll post a pic tmr.

roller84 · 11-17-2007, 12:25 PM

Can the headlight washer covers from the original bumper be re-used?

roller84 · 11-17-2007, 12:26 PM

Quote:

Originally Posted by EuroBlu

when you buy the aero kit you'll get two support pieces like this that fit behind the vents and fogs. The 335i support that you'll swap out on the passenger side has a cut out for filter.

Oh, I think you are referring to the cutout for the oilcooler.

ksfrogman · 11-17-2007, 12:27 PM

Quote:

Originally Posted by Kev

I have two extra pieces of black plastic trims that I don't know where to put. I'll post a pic tmr.

Those go underneath the front bumper. I'll post a photo link shortly.

ksfrogman · 11-17-2007, 12:29 PM

Here's an archived photo of mine from 6-22-06:

roller84 · 11-17-2007, 12:32 PM

Quote:

Originally Posted by ksfrogman

Here's an archived photo of mine from 6-22-06:

Off topic, but do you have a good shot of the front of your car with the Vorsetiner hood and lip. I am getting the same setup but want to get the lip molded.

ksfrogman · 11-17-2007, 01:26 PM

Quote:

Originally Posted by roller84

Off topic, but do you have a good shot of the front of your car with the Vorsetiner hood and lip. I am getting the same setup but want to get the lip molded.

I don't want to jack this thread, but here's an enlarged photo of the sig pic:

Kev · 11-17-2007, 02:25 PM

Quote:

Originally Posted by ksfrogman

Here's an archived photo of mine from 6-22-06:

I already put those in, but I still have two more pieces in my possession that I don't know where to put them

ksfrogman · 11-17-2007, 03:00 PM

Quote:

Originally Posted by Kev

I already put those in, but I still have two more pieces in my possession that I don't know where to put them

Can you post a photo of those pieces?

EuroBlu · 11-17-2007, 03:13 PM

Quote:

Originally Posted by Park828

for all those that have installed the m tech kit on the e90...

where do those little extra fins we had to buy go?

Thank you!

not sure if you mean the two flaps at the front

or rear muffler hear shields

sorry the camera phone photos suck

EuroBlu · 11-17-2007, 03:29 PM

Quote:

Originally Posted by 1clean335i

can you pm me some pics of your car with the kit??? looks really good in that sig picture but i can barely see it.

the lips a studie rep. get the original if you can find it but the rep's OK if you mold it on.

Kev · 11-17-2007, 03:35 PM

Quote:

Originally Posted by ksfrogman

Can you post a photo of those pieces?

Will do once I'm done charging the battery. It just ran out of juice.....

Kev · 11-17-2007, 05:39 PM

Here they are:

ksfrogman · 11-17-2007, 07:04 PM

I'll post exactly what those parts are for in a moment.

ksfrogman · 11-17-2007, 07:07 PM

Look at Part 9.

Part #51718044575: Covering, rear left

Part #51718044576: Covering, rear right

11-06-2007, 05:36 PM	#1
Park828 Banned 28 Rep 552 Posts Drives: Man Join Date: Feb 2007 Location: Usa iTrader: (3)	e90 Mtech install for all those that have installed the m tech kit on the e90... where do those little extra fins we had to buy go? also the fender liner for the kit doesn't come with oil cooler cut out. do i just cut it out of the one that comes with the kit or do i have to buy one for 335 with oil cooler? Thank you!
	Appreciate 0 Tweet Quote

11-08-2007, 07:28 PM	#3
EuroBlu Enlisted Member 3 Rep 34 Posts Drives: Blue 335i M Sport Join Date: Jun 2007 Location: Los Angeles iTrader: (0) Garage List 2007 335i M Sport [0.00]	You have to get these parts extra to the M kit for an e90 335i with an oil cooler.... 51-11-8-044-638 Support 51-74-8-044-594 Air duct 51-12-8-043-239 Rear diffuser 51-71-8-044-575 Muffler heat shield 51-71-8-044-576 Muffler heat shield my body shop was able to stick with the original fender liner for the side with the oil cooler.
	Appreciate 0 Quote

11-16-2007, 01:12 AM	#5
EuroBlu Enlisted Member 3 Rep 34 Posts Drives: Blue 335i M Sport Join Date: Jun 2007 Location: Los Angeles iTrader: (0) Garage List 2007 335i M Sport [0.00]	when you buy the aero kit you'll get two support pieces like this that fit behind the vents and fogs. The 335i support that you'll swap out on the passenger side has a cut out for filter. Attached Images __________________ hump watch 2007
	Appreciate 0 Quote

11-16-2007, 11:46 PM	#8
Kev Critical Care Anesthesiologist 500 Rep 8,824 Posts Drives: SMB F83 Join Date: Aug 2006 Location: Seattle, WA iTrader: (24) Garage List 2009 Porsche 911 Ca ... [9.50]	I have two extra pieces of black plastic trims that I don't know where to put. I'll post a pic tmr. __________________ kev { divinum est sedate dolorem } "your friendly neighborhood critical care anesthesiologist"
	Appreciate 0 Quote

11-17-2007, 12:25 PM	#9
roller84 Captain 64 Rep 776 Posts Drives: E90 335i & E60 550i Join Date: Dec 2005 Location: NYC iTrader: (3) Garage List 2018 BMW M5 [0.00] 2007 BMW 335i [0.00]	Can the headlight washer covers from the original bumper be re-used? __________________ Pure S2 Turbos \| Vargas Outlets \| RB Inlets \| OEM SS Kit & Performance Steering Wheel\| LCI Rear Conversion \| Euro Xenons \| RD Sport Quad Exhaust \| Spearco Intercooler \| Cobb V3 \| MORR VS7 \| KW V3 \| H&R Sways \| Mtech Bodykit \| Vorsteiner CF Hood, CSL Trunk & Front Lip \| Quaife LSD \| Rotora BBK \| GruppeM Intake \| Forge UK DV \| AR Design Catted DP's
	Appreciate 0 Quote

11-17-2007, 12:29 PM	#12
ksfrogman Major General 622 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	Here's an archived photo of mine from 6-22-06: __________________
	Appreciate 0 Quote

11-17-2007, 05:39 PM	#20
Kev Critical Care Anesthesiologist 500 Rep 8,824 Posts Drives: SMB F83 Join Date: Aug 2006 Location: Seattle, WA iTrader: (24) Garage List 2009 Porsche 911 Ca ... [9.50]	Here they are: __________________ kev { divinum est sedate dolorem } "your friendly neighborhood critical care anesthesiologist" Last edited by Kev; 12-13-2008 at 10:08 PM..
	Appreciate 0 Quote

11-17-2007, 07:04 PM	#21
ksfrogman Major General 622 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	I'll post exactly what those parts are for in a moment. __________________
	Appreciate 0 Quote

11-17-2007, 07:07 PM	#22
ksfrogman Major General 622 Rep 6,750 Posts Drives: E90 330i 6MT Join Date: Nov 2005 Location: Torrance, CA iTrader: (12) Garage List 2006 330i [0.00] 2006 330i [0.00]	Look at Part 9. Part #51718044575: Covering, rear left Part #51718044576: Covering, rear right Attached Images __________________
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search