LIKE NEW Enkei Racing RP03 19x10 wheels (square!), with or without Hankook V12 tires

ClayMan · 03-05-2011, 12:56 AM

An aggressive, concave 5-spoke wheel that is lightweight and strong due to Enkei's MAT casting process. They don't get the same pub in the BMW world but these are essentially flow-formed wheels similar to Forgestar, BBS RC, etc. - forged strength and weight without the extreme cost.

Enkei Racing Series RP03 (Genuine), Made in Japan
Size: 19" x 10"
Offset: +20mm
Bolt Pattern: 5x120
Center Bore: 74.1mm
Material: 1-piece Enkei MAT
Finish: Silver Painted
Weight: ~24lb
Condition: Like New, mounted to test fitment

Hankook Ventus Evo V12
Size: 275/30-19
Condition: Like New, mounted to test fitment

This is a square setup that can be made to fit a variety of fitments from 3-series (E46 M3, E9x, E9x M3) to 5-series (E39, E60) and even 6-series (E63) and 7-series with different tire sizes...

Price: $2200 (set of 4 tires and wheels) or $1400 (wheels only)

Borrowed pics:

killakill · 03-05-2011, 07:42 PM

hey willing to part out 2 tires?

let me know

ClayMan · 03-09-2011, 05:48 PM

bump

ClayMan · 03-11-2011, 12:17 AM

Tires and wheels have now been mounted and driven for ~200km... Therefore PRICE DROP!
$2000 for the set

ClayMan · 03-25-2011, 03:12 PM

bump

Dr. G · 03-25-2011, 09:46 PM

If you can part out tires I'll take em

ClayMan · 04-05-2011, 02:10 AM

bump

99leeric · 04-05-2011, 10:43 AM

no dents or chips on the rims?

do you have the receipt for these rims?

99leeric · 04-05-2011, 12:33 PM

clayman

very interested in these wheels but i need your expertise

i got a 2011 335xi sedan.

i will lower the vehicle later but nothing aggressive.

will these wheels fit on my car without rubbing and without rolling the fenders?

edvc520 · 04-05-2011, 12:38 PM

Quote:

Originally Posted by 99leeric

clayman

very interested in these wheels but i need your expertise

i got a 2011 335xi sedan.

i will lower the vehicle later but nothing aggressive.

will these wheels fit on my car without rubbing and without rolling the fenders?

depends how much you gonna lower..
i'm lowered on eibach.. the most conservative drop, running 19x10 20 offset for the rear with 265 tires, you have to roll fenders and set at least -2 camber
I'm not sure if you can run these tires for the front..

99leeric · 04-05-2011, 03:01 PM

edvc520,

arent the fenders plastic on the 335xi? how am i going to roll the fenders?

what if i dont lower the car... you think it will be fine?

edvc520 · 04-05-2011, 03:21 PM

Quote:

Originally Posted by 99leeric

edvc520,

arent the fenders plastic on the 335xi? how am i going to roll the fenders?

what if i dont lower the car... you think it will be fine?

the rear fenders are metals
for 275 tires, i bet you have to roll the fenders even if you don't lower
i think you might be able to run with 255 tires without rolling fenders and without lowering..

ClayMan · 04-11-2011, 10:47 PM

bump, $1850!

ClayMan · 05-01-2011, 12:48 AM

This is what they look like on an E39...

ClayMan · 05-11-2011, 05:08 PM

$1750 OBO!

domrep · 05-11-2011, 10:13 PM

Quote:

Originally Posted by 99leeric

edvc520,

arent the fenders plastic on the 335xi? how am i going to roll the fenders?

what if i dont lower the car... you think it will be fine?

they won't fit, the offset is way too aggressive and the tires won't fit upfront, especially with a drop.

domrep · 05-11-2011, 10:14 PM

Quote:

Originally Posted by edvc520

the rear fenders are metals
for 275 tires, i bet you have to roll the fenders even if you don't lower
i think you might be able to run with 255 tires without rolling fenders and without lowering..

no, im lowered on kw v2's with 275 rears, no rolling. minor rub on big bumps.

ClayMan · 06-09-2011, 03:06 PM

bump... perfect square fitment for e9x M3s!

ClayMan · 07-15-2011, 04:21 PM

bump for all you M3 owners!

03-05-2011, 12:56 AM	#1
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	LIKE NEW Enkei Racing RP03 19x10 wheels (square!), with or without Hankook V12 tires An aggressive, concave 5-spoke wheel that is lightweight and strong due to Enkei's MAT casting process. They don't get the same pub in the BMW world but these are essentially flow-formed wheels similar to Forgestar, BBS RC, etc. - forged strength and weight without the extreme cost. Enkei Racing Series RP03 (Genuine), Made in Japan Size: 19" x 10" Offset: +20mm Bolt Pattern: 5x120 Center Bore: 74.1mm Material: 1-piece Enkei MAT Finish: Silver Painted Weight: ~24lb Condition: Like New, mounted to test fitment Hankook Ventus Evo V12 Size: 275/30-19 Condition: Like New, mounted to test fitment This is a square setup that can be made to fit a variety of fitments from 3-series (E46 M3, E9x, E9x M3) to 5-series (E39, E60) and even 6-series (E63) and 7-series with different tire sizes... Price: $2200 (set of 4 tires and wheels) or $1400 (wheels only) Borrowed pics: Last edited by ClayMan; 03-05-2011 at 01:06 AM..
	Appreciate 0 Tweet Quote

03-05-2011, 07:42 PM	#2
killakill Captain 79 Rep 746 Posts Drives: E93 M3,6th Gen Camaro SS Join Date: Aug 2010 Location: Toronto iTrader: (2)	tires hey willing to part out 2 tires? let me know
	Appreciate 0 Quote

03-09-2011, 05:48 PM	#3
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump
	Appreciate 0 Quote

03-11-2011, 12:17 AM	#4
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	Tires and wheels have now been mounted and driven for ~200km... Therefore PRICE DROP! $2000 for the set
	Appreciate 0 Quote

03-25-2011, 03:12 PM	#5
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump
	Appreciate 0 Quote

03-25-2011, 09:46 PM	#6
Dr. G Major General 288 Rep 5,064 Posts Drives: Black e92 335i Join Date: Apr 2010 Location: Brampton, Ontario iTrader: (32) Garage List e92 BMW 335i [8.84]	If you can part out tires I'll take em __________________ JB4 / OSS Angel Eyes / Downpipes / F1-Racewerks FMIC / Custom Meth Kit / BMS DCI / ER Chargepipe / HKS BOV / BMS Meth Elbow / BMW Performance Exhaust / Carbon Fiber Inlay Quad Tips / 19" Miro 111 / Front Aero Lip / M3 Sides / VRS CSL Trunk / Mtech Rear / DD CF Quad Finned Diffuser / LCI Tails / BBK / Smoked Reflectors / F1 Euphoria LED Interior / License LED's / GT 5000k Corners / 5000k HID Fogs / Air Scoops / LED Turn Signals / FK Silverline Coilovers / HPA endlinks / Vibrant Resonators / Osram CBI 5000k D1S
	Appreciate 0 Quote

04-05-2011, 02:10 AM	#7
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump
	Appreciate 0 Quote

04-05-2011, 10:43 AM	#8
99leeric Private 12 Rep 88 Posts Drives: n/a Join Date: Mar 2011 Location: everywhere iTrader: (0)	no dents or chips on the rims? do you have the receipt for these rims?
	Appreciate 0 Quote

04-05-2011, 12:33 PM	#9
99leeric Private 12 Rep 88 Posts Drives: n/a Join Date: Mar 2011 Location: everywhere iTrader: (0)	clayman very interested in these wheels but i need your expertise i got a 2011 335xi sedan. i will lower the vehicle later but nothing aggressive. will these wheels fit on my car without rubbing and without rolling the fenders?
	Appreciate 0 Quote

04-05-2011, 03:01 PM	#11
99leeric Private 12 Rep 88 Posts Drives: n/a Join Date: Mar 2011 Location: everywhere iTrader: (0)	edvc520, arent the fenders plastic on the 335xi? how am i going to roll the fenders? what if i dont lower the car... you think it will be fine?
	Appreciate 0 Quote

04-11-2011, 10:47 PM	#13
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump, $1850!
	Appreciate 0 Quote

05-01-2011, 12:48 AM	#14
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	This is what they look like on an E39...
	Appreciate 0 Quote

05-11-2011, 05:08 PM	#15
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	$1750 OBO!
	Appreciate 0 Quote

06-09-2011, 03:06 PM	#18
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump... perfect square fitment for e9x M3s!
	Appreciate 0 Quote

07-15-2011, 04:21 PM	#19
ClayMan Second Lieutenant 20 Rep 213 Posts Drives: E36, E39, E86 Join Date: Dec 2007 Location: ON, NY iTrader: (0)	bump for all you M3 owners!
	Appreciate 0 Quote