Fog Light delete on replica M3 bumper

incantana · 08-26-2011, 11:37 AM

Can someone PLEASE post a diy for this?? I want it to look like the real m3 bumper.

WDBi · 08-26-2011, 12:29 PM

you just unscrew the mesh

fdriller9 · 08-26-2011, 02:25 PM

I used gutter guards and plasti-dipped for my lower grills.

rooringhusky · 08-26-2011, 09:54 PM

Quote:

Originally Posted by Will@StageX

you just unscrew the mesh

If you unscrew the mesh then doesnt it look as good as the M3 ducts...at least in my opinion

Also if I do decide to just unscrew them...leaving fogs disconnected wont throw any lights will it?

Thanks for any help in advance

SHATX · 08-30-2011, 06:52 PM

Remove the mesh and cut the rear tabs off so they dont show.

You can leave the bulbs in the socket and tape them up with 3m electrical tape. Then zip tie them out of the way so they don't hang down. Just don't ever hit your foglight switch

(I went thus route with no issues)

Or remove the bulbs and have the car coded for no foglights.

I also ordered the M R L air ducts from Tischer. I retro fitted them to my replica bumper and it looks perfect.

CubanJJ09 · 08-31-2011, 06:02 PM

What are m r l ducts

rooringhusky · 09-01-2011, 12:07 AM

Quote:

Originally Posted by CubanJJ09

What are m r l ducts

Interested in what the M R L ducts are...got any pics or links?

SHATX · 09-01-2011, 08:22 AM

Quote:

Originally Posted by rooringhusky

Interested in what the M R L ducts are...got any pics or links?

The "M" right and Left side airducts

here is the DIY i followed to do the install.

http://www.e90post.com/forums/showth...hlight=********

rooringhusky · 09-01-2011, 03:14 PM

Quote:

Originally Posted by SHATX

The "M" right and Left side airducts

here is the DIY i followed to do the install.

http://www.e90post.com/forums/showth...hlight=********

Thanks!

08-26-2011, 11:37 AM	#1
incantana Captain 47 Rep 662 Posts Drives: 2019 Z06/Z07 3LZ; 2008 E93 M3 Join Date: Apr 2011 Location: USA iTrader: (3)	Fog Light delete on replica M3 bumper Can someone PLEASE post a diy for this?? I want it to look like the real m3 bumper.
	Appreciate 0 Tweet Quote

08-26-2011, 02:25 PM	#3
fdriller9 Banned 263 Rep 7,089 Posts Drives: '06 AW 330xi Join Date: Mar 2009 Location: North Jersey/Philly/NYC iTrader: (4) Garage List 2006 330xi [6.44]	I used gutter guards and plasti-dipped for my lower grills.
	Appreciate 0 Quote

08-30-2011, 06:52 PM	#5
SHATX baby chicken eater 55 Rep 424 Posts Drives: 07 E90 335i - 08 3.0si coupe Join Date: Oct 2010 Location: Round Rock,TX iTrader: (2) Garage List 2007 E90 335i [10.00]	Remove the mesh and cut the rear tabs off so they dont show. You can leave the bulbs in the socket and tape them up with 3m electrical tape. Then zip tie them out of the way so they don't hang down. Just don't ever hit your foglight switch (I went thus route with no issues) Or remove the bulbs and have the car coded for no foglights. I also ordered the M R L air ducts from Tischer. I retro fitted them to my replica bumper and it looks perfect. __________________ Too Long to list... I eat M3's and Baby Chickens for Breakfast. How bout you?
	Appreciate 0 Quote

08-31-2011, 06:02 PM	#6
CubanJJ09 Banned 172 Rep 12,680 Posts Drives: like an asshole Join Date: Feb 2008 Location: Chicago Burbs iTrader: (2) Garage List 2007 BMW 335i [6.18]	What are m r l ducts
	Appreciate 0 Quote