Sponsored by The Tire Rack

[Cuba]

Hi I'm looking into getting some spacers for the rear possibly the front also.

I did research and still am unsure of what size to get.

i have a 2007 328xi e90 Non sport suspension

wheel specs are

19x8.5" +30 Offset Front 1.5" Tire 235/30/19
19x9.5" +30 Offset Rear Tire 265/35/19

I will be dropped on H&R sport springs

Id rather not roll my fenders and I would like a flush look..

Let me know of the recommended size thank you

will go extended lugs also.

Thank you

[mlifxs]

if you haven't seen this, it might help corroborate what folks tell you

http://www.turnermotorsport.com/t-wh...yclopedia.aspx

[SV Concepts II]

^ +1 the best way to determine what size spacer you need is to measure how far you want/can push the wheel out without rubbing. You can use the chart in the link above as a reference on how and what to measure. Good luck!

[Projekt_BooGie]

+5 up front and +10 rear. You'll be good. keep in mind that ??x9(+25) / ??x10(+25) will put you flush. So...you should be good. But of course def follow the link...for it'll let you decide exactly what is good for YOU.

[VMRWheels]

With your current setup, you should be fairly flush already. I would droop the vehicle first and see how it sits before determining any kind of spacers.

-Charles@VMRWheels

[Cuba]

Originally Posted by VMRWheels

With your current setup, you should be fairly flush already. I would droop the vehicle first and see how it sits before determining any kind of spacers.

-Charles@VMRWheels

Yea that sounds like a good idea.. will probably drop it this month and measure then...


thanks for all the help everyone