vmr v710 fitment question

markeh · 09-02-2011, 09:44 AM

Hey if I get VMR V710 with these offsets

19x8.5 ET35mm Front 235/35/19
19x9.5 ET33mm Rear 265/30/19

And lower it with H&R Sport or Race

would I have any rubbing issues, or would I need to get fenders rolled?
thanks.

EJ_3 · 09-02-2011, 11:31 AM

With those offsets, you'll be fine.

SV Concepts II · 09-02-2011, 01:18 PM

Those are the recommended fitments for a E9X 3 series based off of stock suspension. However, you should not experience any rubbing issues with the H&R sport springs. Post up some pictures after you get everything installed.

VMRWheels · 09-02-2011, 07:16 PM

Quote:

Originally Posted by markeh

Hey if I get VMR V710 with these offsets

19x8.5 ET35mm Front 235/35/19
19x9.5 ET33mm Rear 265/30/19

And lower it with H&R Sport or Race

would I have any rubbing issues, or would I need to get fenders rolled?
thanks.

With Sport Springs you should be ok... but with Race Springs, you will most likely require some fender rolling.

-Charles@VMRWheels

bmw325i · 09-03-2011, 04:26 PM

I have the same sizes and offsets you'll most likely be fine with race springs.

09-02-2011, 09:44 AM	#1
markeh Second Lieutenant 13 Rep 219 Posts Drives: 2013 CB 650xi GC Join Date: Sep 2010 Location: Fort Lee, NJ iTrader: (0)	vmr v710 fitment question Hey if I get VMR V710 with these offsets 19x8.5 ET35mm Front 235/35/19 19x9.5 ET33mm Rear 265/30/19 And lower it with H&R Sport or Race would I have any rubbing issues, or would I need to get fenders rolled? thanks.
	Appreciate 0 Tweet Quote

09-02-2011, 11:31 AM	#2
EJ_3 Colonel 380 Rep 2,838 Posts Drives: e92 335i, e34 525i & e60 530i Join Date: Aug 2011 Location: N Las Vegas iTrader: (13) Garage List 2007 BMW 335i [8.34] 2016 Ram 1500 Sport [8.00] 1994 BMW 525i [10.00] 2007 BMW 530i [8.66]	With those offsets, you'll be fine. __________________ click here for mods
	Appreciate 0 Quote

09-02-2011, 01:18 PM	#3
SV Concepts II 286 Rep 6,093 Posts Drives: E90 M3 Join Date: Dec 2008 Location: 1460 White Oaks Rd. Suite F Campbell, CA 95008 iTrader: (7)	Those are the recommended fitments for a E9X 3 series based off of stock suspension. However, you should not experience any rubbing issues with the H&R sport springs. Post up some pictures after you get everything installed.
	Appreciate 0 Quote

09-03-2011, 04:26 PM	#5
bmw325i Major General 239 Rep 5,118 Posts Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States iTrader: (8)	I have the same sizes and offsets you'll most likely be fine with race springs.
	Appreciate 0 Quote