[creaminz]

Where do you guys get 100% methonal from? Home depot?

[SSIMPS]

Originally Posted by creaminz

Where do you guys get 100% methonal from? Home depot?

HP autowerks sells 5 gallon drums of M1. You get a deal if you buy 4 drums is a discount, Ill let you know next time im buying more if you want to split 2 and 2

[Irishace]

Very impressive numbers Cream, well done!

[OpenFlash]

Originally Posted by creaminz

Where do you guys get 100% methonal from? Home depot?

See if there are any VP Racing Fuel distributors near you (you can go to their website). And then just pick up methanol from them. 5 gallons will last you a long time. If you simply can't get methanol, you can use denatured alcohol from a hardware supply store. Or if you want the super easy way out, just order Boost Juice from Jegs or Summit Racing. It's 50/50 meth/water but, with the PWM kit, it works very well. Gives up a little power compared to a 75/25 mix but still very effective.

[creaminz]

Originally Posted by shiv@vishnu

See if there are any VP Racing Fuel distributors near you (you can go to their website). And then just pick up methanol from them. 5 gallons will last you a long time. If you simply can't get methanol, you can use denatured alcohol from a hardware supply store. Or if you want the super easy way out, just order Boost Juice from Jegs or Summit Racing. It's 50/50 meth/water but, with the PWM kit, it works very well. Gives up a little power compared to a 75/25 mix but still very effective.

Coo thx for the info Shiv. I am running Boost Juice with PWM kit which feels amazing at even 16psi. I am just looking for higher mix for dyno runs to see what I can make the most out of these AWD turbos. still 466 rwtq is pretty darn good

[OpenFlash]

Originally Posted by creaminz

Coo thx for the info Shiv. I am running Boost Juice with PWM kit which feels amazing at even 16psi. I am just looking for higher mix for dyno runs to see what I can make the most out of these AWD turbos. still 466 rwtq is pretty darn good

Give it hell

[creaminz]

Originally Posted by shiv@vishnu

Give it hell

oh trust me, I will

[Sniz]

some great numbers there and smoooooth graphs. Engine looks happy.


may I suggest you stop using boost juice? I used 1 full tank of that crap in my car and now all the lines are stained PINK. My HFS6 had a resistor short out in the FCM causing erratic behavior and failure. I sent it back to Jeff Howerton to have it bench tested and fixed. He called me and told me there was pink gunk/residue starting to block some of the valving. I only ran one 1 gallon tank..........probably 5 tanks of meth/water mix of my own afterwards including some 100% and the pink buildup was still there.

not only that but your wasting money on the stuff, it costs too much considering its 50/50. I run 90/10..........up your concentration and you'll be able to have even lower IAT's and increased fueling.

a 5 gallon can of 100% racing meth costs me $32 here in MD.

[Sniz]

Originally Posted by shiv@vishnu

See if there are any VP Racing Fuel distributors near you (you can go to their website). And then just pick up methanol from them. 5 gallons will last you a long time. If you simply can't get methanol, you can use denatured alcohol from a hardware supply store. Or if you want the super easy way out, just order Boost Juice from Jegs or Summit Racing. It's 50/50 meth/water but, with the PWM kit, it works very well. Gives up a little power compared to a 75/25 mix but still very effective.

+1 but see above.

[Jeff@TopGearSolutions]

Originally Posted by Sniz

some great numbers there and smoooooth graphs. Engine looks happy.


may I suggest you stop using boost juice? I used 1 full tank of that crap in my car and now all the lines are stained PINK. My HFS6 had a resistor short out in the FCM causing erratic behavior and failure. I sent it back to Jeff Howerton to have it bench tested and fixed. He called me and told me there was pink gunk/residue starting to block some of the valving. I only ran one 1 gallon tank..........probably 5 tanks of meth/water mix of my own afterwards including some 100% and the pink buildup was still there.

not only that but your wasting money on the stuff, it costs too much considering its 50/50. I run 90/10..........up your concentration and you'll be able to have even lower IAT's and increased fueling.


a 5 gallon can of 100% racing meth costs me $32 here in MD.

Yea boost juice is a waste of freight and money. You are paying to ship nearly half a gallon of water.


Vp M1> Denatured alcohol> Bottles of HEET

[creaminz]

Great information Sniz! I still have 6 gallons of boost juice left... i will prolly go through them quick and will start mix my own Juice

[DaFish]

Originally Posted by cn555ic

Many of us first time users of meth start off with 50/50 and once we are addicted its no longer 50/50 and somewhere near 70/30 or 80/20!!!

lol... I did 2 jugs, and went straight to 75/25.... and up it to 18 PSI

creaminz, nice looking ride and great numbers man...

[DaFish]

Originally Posted by (-(ellblazer420

Great results! Love that dyno graph. Good to see some kits hitting the streets. Get up there and show that amg who is boss now.

I want to see a 100% meth run on the dyno

When you run 100% meth... do you have to change settings in the procede? or it just runs cooler?

[DaFish]

Originally Posted by creaminz

Where do you guys get 100% methonal from? Home depot?

I found a wholesale pool chemical company that sells pure meth. I got a 5 gallon drum for under 40 bucks.

[NoQuarter]

Originally Posted by DaFish

I found a wholesale pool chemical company that sells pure meth. I got a 5 gallon drum for under 40 bucks.

I kept making calls. Found out that calling go-kart tracks and supply shops is the way to find out how to get meth. That led me to a VP Racing Fuel distributor which happens to also be the HQ of a petrolium company in a nearby town about 40mins away.

$3.50/gal for as much or as little as I want!

[thetedderbear]

That ignition correct got me too, when installing the PMW kit with a friend. We spent a good 30 minutes trying to figure it out before we saw the IC was 100% *facepalm*

[EastBayE90]

Originally Posted by DaFish

When you run 100% meth... do you have to change settings in the procede? or it just runs cooler?

No settings need to be adjusted. Just pour it in and do a few pulls and it will autotune.