[greenbeauty]

Ok.. question,
I really want to buy the Kerscher bodykit for my E92 very soon.

The only thing that I'm scared of.. is the height of the car after mounted the frontbumper.
A friend of mine have the same front bumper, and his E92 is way to low for the roads in Holland. Impossible to park in a car garage etc etc..

So I'm looking for a way to higher the car a LITTLE bit,
so I can drive normal with the frontbumper mounted.

Airride is not an option... To much 2 fast to furious look
So maybe there is an coilover that can higher the car as stock ?


Thanks for answering.

[subieworx]

My AST's can go much higher than stock if needed.

[greenbeauty]

@subie

thanks for you reply
do you have some more specs ?

What kinds of AST's? website? type? costs?

Thanks man

[subieworx]

They are custom valved AST's from Turn in Concepts. What specs do you want? They were about $2400 I believe.

[HP Autosport]

Originally Posted by greenbeauty

@subie

thanks for you reply
do you have some more specs ?

What kinds of AST's? website? type? costs?

Thanks man

AST 4100(rebound adjustable only) starts at $1899 without springs or $2099 with spring rates of your choice. Camber plates will add $439 to the kit if you choose to get them.

AST 4200(rebound and compression adjustable) starts at $2949 with springs.

Product link:

http://www.e90post.com/forums/showth...&highlight=ast

[greenbeauty]

Thanks for the info.
A really clean solution but very expensive to higher the bmw for a little bit..

Are there more alternatives??

[HP Autosport]

Originally Posted by greenbeauty

Thanks for the info.
A really clean solution but very expensive to higher the bmw for a little bit..

Are there more alternatives??

Yes, our Koni based single adjustable coilover kit will also allow stock or about 1" higher ride height along with up to 1" lower.

http://www.e90post.com/forums/showth...highlight=koni