Benchmade Proper FTMFW!

boom · 10-08-2011, 08:48 PM

I thought I would share pix of my new exhaust. I bought it from a local guy in Maryland. He had had it made by a company in Elkridge called Benchmade Proper, www.benchmadeproper.com. It's a 3" downpipe back exhaust with vibrant cylinder resonators and vibrant oval resonators. It has quad tips that are amazing. Everything is 304 stainless and tig welded by the owners, Joe and Brian. I took the exhaust to them after a day of trying to hang it on jackstands with a torn rotator cuff. I just couldn't pull it off and I also wanted to develop a relationship with them as I may expected to have the exhaust modified to my specs should there be drone or poor fitment, etc. I went this morning and had the exhaust hung and the bumper cut. Benchmade Proper is really small shop and just starting out but they are starting for the right reasons. They don't cut corners or overpromise. The materials are quality and they're willing to accommodate all requests. Their workmanship speaks for itself. I'm really happy with how it turned out. Joe cut my stock bumper and it looks great. I expected to end up buying an Mtech if this didn't work out but I'm completely satisfied. Enough with the typing...

The exhaust gets obtrusive around 2300 rpm but only under load in 6th. It doesn't drone it more like booms. I'm considering adding sound canisters (similar to what's used on a G37) in the near future. Joe knew exactly what I was talking about when I talked with him. In fact, he was doing that exact same thing for an RSX later today.

I'm very pleased. The quality, fitment, and attention to detail that Benchmade delivers is awesome.

Jeff@TopGearSolutions · 10-08-2011, 08:52 PM

Looks real clean

Syndicategt · 10-08-2011, 08:53 PM

What does it weigh? They need to invest in a mandrel bender.

BoostAddict · 10-08-2011, 09:37 PM

Those pie cuts are sexy

boom · 10-08-2011, 10:06 PM

Here is the virtual dyno comparison of a 3rd gear run before and after the exhaust install. The logs follow.

That's a pretty sizeable gain - 35 whp. Looking at the logs you'll see IAT differences of about 10-12 deg. That will negate some of the gains as cooler temps give more power but at close to the 100 deg mark I'm not sure it's that big of a deal. I'm not necessarily saying I gained 35 whp but the car feels quicker.

There is a big throttle closure with the new exhaust. This was literally on the drive home so there was no adaptation. I never felt it - as demonstrated by the dyno. My timing values are dead even.

thetedderbear · 10-09-2011, 01:20 AM

Videos or sound clips?

BreakPoint · 10-09-2011, 01:26 AM

Wow, looks Nice! Expensive?

lpphreakx06 · 10-09-2011, 02:45 AM

Looks like quality work for sure, but labor intensive, no?

I love the tips you chose, single wall

BMWsky · 10-09-2011, 08:14 AM

Whoa...that looks awesome!

boom · 10-09-2011, 10:02 AM

Quote:

Originally Posted by BreakPoint

Wow, looks Nice! Expensive?

It's more than an ots system but not by much considering it's installed and my bumper was modded to fit. It's high quality tig welded 304 stainless and designed to the customer's requirements. Clearly the guy I bought it from wanted to eliminate drone with all of the resonators. I added an extra set of hangers and will have sound canisters added when I do DPs.

Quote:

Originally Posted by lpphreakx06

Looks like quality work for sure, but labor intensive, no?

I love the tips you chose, single wall

Yeah, you can see the skill and passion that went into it. I love the tips as well.

Quote:

Originally Posted by BMWsky

Whoa...that looks awesome!

Thanks! I agree. Hence the title of the thread.

zerep1 · 10-09-2011, 11:20 AM

it looks and sounds nice but from a performance perspective ho nice would it have been to go cats y pipe single pipe all the way down to the end reverse y pipe into the mufflers

boom · 10-09-2011, 01:21 PM

Quote:

Originally Posted by zerep1

it looks and sounds nice but from a performance perspective ho nice would it have been to go cats y pipe single pipe all the way down to the end reverse y pipe into the mufflers

Interesting. That's the cool thing about going custom - you can specify exactly what you want. I'd really like to see/hear that kind of a setup. Maybe a 2.5" Y pipe to a 3.5"-4" collector and tube to another Y out to the mufflers. Sounds very cool. Give them a call...

PKL · 10-09-2011, 01:33 PM

Nice work

import36 · 10-09-2011, 02:15 PM

looks great man....i like the quad tip setup too!

rooringhusky · 10-09-2011, 05:07 PM

That is a very nice custom exhaust...really liking how it turned out!

Only part I dont like is all the welds on the tips...Other than that it looks amazing!

boom · 10-09-2011, 05:40 PM

Quote:

Originally Posted by PKL

Nice work

They really did do a great job. Thanks.

Quote:

Originally Posted by import36

looks great man....i like the quad tip setup too!

Much appreciated. I only wanted a quad setup. I'm thrilled with how it looks.

Quote:

Originally Posted by rooringhusky

That is a very nice custom exhaust...really liking how it turned out!

Only part I dont like is all the welds on the tips...Other than that it looks amazing!

Thanks. The tips are my favorite part lol.. It shows off their skillz.

Tzu · 10-09-2011, 08:23 PM

Quote:

Originally Posted by boom

The tips are my favorite part lol.. It shows off their skillz.

Welding pornography.

boom · 10-09-2011, 10:29 PM

Quote:

Originally Posted by Tzu

Welding pornography.

exactly.

bahn stormer · 10-10-2011, 04:43 PM

Nice looking exhaust, especially the tips. That is a real clean solution.
Great that they are local also.

Sniz · 10-10-2011, 05:02 PM

yup fantastic stuff man, you were so excited about it at the track Friday.

If I need anything done on my M3 i'll get in touch to see their prices. Its possible I'll need a new downpipe made if I change to a V-banded exhaust housing from my current 4 bolt. If I do that I'll want a e-cutout installed on the downpipe for crazy time sexy sounds.

I'm all about custom SS exhausts, love them. Here is a walk around mine.

10-08-2011, 08:48 PM	#1
boom My X5d tows my spec miata to the track. 77 Rep 1,254 Posts Drives: 2010 X5 35d Join Date: Sep 2009 Location: USA iTrader: (0)	Benchmade Proper FTMFW! I thought I would share pix of my new exhaust. I bought it from a local guy in Maryland. He had had it made by a company in Elkridge called Benchmade Proper, www.benchmadeproper.com. It's a 3" downpipe back exhaust with vibrant cylinder resonators and vibrant oval resonators. It has quad tips that are amazing. Everything is 304 stainless and tig welded by the owners, Joe and Brian. I took the exhaust to them after a day of trying to hang it on jackstands with a torn rotator cuff. I just couldn't pull it off and I also wanted to develop a relationship with them as I may expected to have the exhaust modified to my specs should there be drone or poor fitment, etc. I went this morning and had the exhaust hung and the bumper cut. Benchmade Proper is really small shop and just starting out but they are starting for the right reasons. They don't cut corners or overpromise. The materials are quality and they're willing to accommodate all requests. Their workmanship speaks for itself. I'm really happy with how it turned out. Joe cut my stock bumper and it looks great. I expected to end up buying an Mtech if this didn't work out but I'm completely satisfied. Enough with the typing... The exhaust gets obtrusive around 2300 rpm but only under load in 6th. It doesn't drone it more like booms. I'm considering adding sound canisters (similar to what's used on a G37) in the near future. Joe knew exactly what I was talking about when I talked with him. In fact, he was doing that exact same thing for an RSX later today. I'm very pleased. The quality, fitment, and attention to detail that Benchmade delivers is awesome.
	Appreciate 0 Tweet Quote

10-08-2011, 08:52 PM	#2
Jeff@TopGearSolutions 3461 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Looks real clean
	Appreciate 0 Quote

10-08-2011, 08:53 PM	#3
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	What does it weigh? They need to invest in a mandrel bender. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

10-08-2011, 09:37 PM	#4
BoostAddict Banned 48 Rep 932 Posts Drives: SGM 335i Join Date: Jan 2010 Location: Boynton Beach, FL iTrader: (4)	Those pie cuts are sexy
	Appreciate 0 Quote

10-08-2011, 10:06 PM	#5
boom My X5d tows my spec miata to the track. 77 Rep 1,254 Posts Drives: 2010 X5 35d Join Date: Sep 2009 Location: USA iTrader: (0)	Here is the virtual dyno comparison of a 3rd gear run before and after the exhaust install. The logs follow. That's a pretty sizeable gain - 35 whp. Looking at the logs you'll see IAT differences of about 10-12 deg. That will negate some of the gains as cooler temps give more power but at close to the 100 deg mark I'm not sure it's that big of a deal. I'm not necessarily saying I gained 35 whp but the car feels quicker. There is a big throttle closure with the new exhaust. This was literally on the drive home so there was no adaptation. I never felt it - as demonstrated by the dyno. My timing values are dead even.
	Appreciate 0 Quote

10-09-2011, 01:20 AM	#6
thetedderbear Captain 77 Rep 632 Posts Drives: Fiesta ST Join Date: Jan 2011 Location: Arkansas iTrader: (1)	Videos or sound clips?
	Appreciate 0 Quote

10-09-2011, 01:26 AM	#7
BreakPoint Banned 21 Rep 572 Posts Drives: E92 M3 Join Date: Jan 2011 Location: North NJ iTrader: (4)	Wow, looks Nice! Expensive?
	Appreciate 0 Quote

10-09-2011, 02:45 AM	#8
lpphreakx06 Professional Moose Racer 323 Rep 7,509 Posts Drives: SG 335i E92 RIP + 2015 SS M3 Join Date: Jul 2008 Location: Bellevue, Wa iTrader: (25)	Looks like quality work for sure, but labor intensive, no? I love the tips you chose, single wall __________________ Visit my blog anytime: http://www.sfpayments.com BMW Dream Team PNW Chapter, member #1 \|HP Autowerks \| AR DESIGN \| BMW PERFORMANCE \| STOP TECH \| Volk Racing\| AMS \| ARKYM
	Appreciate 0 Quote

10-09-2011, 08:14 AM	#9
BMWsky Major 25 Rep 1,244 Posts Drives: 335i Join Date: Dec 2010 Location: Webster NY iTrader: (1)	Whoa...that looks awesome!
	Appreciate 0 Quote

10-09-2011, 11:20 AM	#11
zerep1 Lieutenant 40 Rep 464 Posts Drives: 335i E90, 328i F30, 230i G42, Join Date: Nov 2010 Location: Tampa, Florida iTrader: (1)	it looks and sounds nice but from a performance perspective ho nice would it have been to go cats y pipe single pipe all the way down to the end reverse y pipe into the mufflers
	Appreciate 0 Quote

10-09-2011, 01:33 PM	#13
PKL Brigadier General 865 Rep 3,275 Posts Drives: 2020 M4, 2022 X6 Join Date: Oct 2008 Location: San Fernando Valley iTrader: (1)	Nice work __________________
	Appreciate 0 Quote

10-09-2011, 02:15 PM	#14
import36 Burrito bowl connoisseur 133 Rep 3,501 Posts Drives: 2015 Nissan GTR Black Edition Join Date: Feb 2008 Location: Seven Cities iTrader: (1)	looks great man....i like the quad tip setup too!
	Appreciate 0 Quote

10-09-2011, 05:07 PM	#15
rooringhusky Objects in the mirror are losing 107 Rep 1,133 Posts Drives: 2007 BMW 335i E92 AW/CR 6MT Join Date: Mar 2011 Location: Socal (OC/Riverside) iTrader: (19) Garage List 2007 BMW 335i [10.00]	That is a very nice custom exhaust...really liking how it turned out! Only part I dont like is all the welds on the tips...Other than that it looks amazing! __________________ PERFORMANCE: JB4 G5 \ Backend Flash \ DCI \ BMS Downpipes \ CX FMIC \ ER Chargepipe \ Synapse BOV \ KW V2 \ Muffler Delete \ CDV \ ZHP Shifter \ Cyba Scoops FUN: M3 Front \ Mtech Rear \ JL 10W6 \ ModMyNav \ V1 Hardwired \ LUX H8 \ Gloss Black Trim \ Gloss Black Roof \ Cyba Quads \ Cyba Mtech Diffuser
	Appreciate 0 Quote

10-10-2011, 04:43 PM	#19
bahn stormer Lieutenant 11 Rep 529 Posts Drives: 07 E90 335i 6MT, 65 MGB Join Date: Feb 2008 Location: PA iTrader: (3)	Nice looking exhaust, especially the tips. That is a real clean solution. Great that they are local also.
	Appreciate 0 Quote

10-10-2011, 05:02 PM	#20
Sniz Lieutenant General 679 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	yup fantastic stuff man, you were so excited about it at the track Friday. If I need anything done on my M3 i'll get in touch to see their prices. Its possible I'll need a new downpipe made if I change to a V-banded exhaust housing from my current 4 bolt. If I do that I'll want a e-cutout installed on the downpipe for crazy time sexy sounds. I'm all about custom SS exhausts, love them. Here is a walk around mine. __________________
	Appreciate 0 Quote