Will this work? 19x10 et38 (rear)

Exvdubguy · 12-07-2011, 07:58 PM

Hello everyone,

New to the bimmer world and wanted to verify that this set up would work on my e92 335. I'm looking at the VMR V710, 19x9 et 35, 19x10 et38. Still on factory sport suspension. I'd like to avoid any rubbing issues if I lower the car in the future. Thanks in advance!

Josh

cuban335i · 12-07-2011, 08:22 PM

that's fine.

I ran:
19x8.5 et30
19x10 et23

and I was slammed with just rolled rear fenders and I didn't rub at all

turb0mik3 · 12-07-2011, 08:58 PM

That should be fine. Depending on the tire size but even a 275 should be ok.

ModBargains.com · 12-08-2011, 12:24 AM

The VMR V710 wheels are not available in the 19x9.0 ET35 fitment as you described. You do have the following choices available:

19x8.5 ET35
19x9.5 ET33
19x10 ET38

You can run either the 19x8.5 ET35 or 19x9.5 ET33 with a 235/35/19 up front and the 19x10 ET38 with a 265/30/19 without any issues!

12-07-2011, 07:58 PM	#1
Exvdubguy Enlisted Member 0 Rep 40 Posts Drives: E92 335i Join Date: Jun 2011 Location: West Palm Beach iTrader: (3)	Will this work? 19x10 et38 (rear) Hello everyone, New to the bimmer world and wanted to verify that this set up would work on my e92 335. I'm looking at the VMR V710, 19x9 et 35, 19x10 et38. Still on factory sport suspension. I'd like to avoid any rubbing issues if I lower the car in the future. Thanks in advance! Josh
	Appreciate 0 Tweet Quote

12-07-2011, 08:22 PM	#2
cuban335i Brigadier General 237 Rep 3,550 Posts Drives: 535i xdrive Join Date: Feb 2009 Location: central NJ iTrader: (18)	that's fine. I ran: 19x8.5 et30 19x10 et23 and I was slammed with just rolled rear fenders and I didn't rub at all __________________ Current: '13 F10 535i xDrive - lightly modded for now Previous: '12 e92 M3 Melbourne Red/Bamboo - ADV.1 ADV10, Volk TE37SL, OSS, Innotech F1, Arkym, iND '09 e92 335i Alpine White/Saddle Brown - fully modded
	Appreciate 0 Quote

12-07-2011, 08:58 PM	#3
turb0mik3 247 Rep 2,781 Posts Drives: E90 335i Racecar Join Date: Jan 2010 Location: San Diego, CA iTrader: (1) Garage List 2010 BMW 335i [8.90]	That should be fine. Depending on the tire size but even a 275 should be ok. __________________ HG Motorsports \| Motiv Motorsport \| Sparta Evolution \| BBS Motorsports \| Sabelt \| JRZ \| NASA ST1 SoCal --- 554whp/487wtrq --- 3200lbs <<YouTube Channel w/ Race Videos>>
	Appreciate 0 Quote

12-08-2011, 12:24 AM	#4
ModBargains.com Banned 487 Rep 13,582 Posts Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 iTrader: (51)	The VMR V710 wheels are not available in the 19x9.0 ET35 fitment as you described. You do have the following choices available: 19x8.5 ET35 19x9.5 ET33 19x10 ET38 You can run either the 19x8.5 ET35 or 19x9.5 ET33 with a 235/35/19 up front and the 19x10 ET38 with a 265/30/19 without any issues!
	Appreciate 0 Quote