|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
WTB: E92 rear console compartment/trim
|
|
12-08-2011, 03:16 AM | #1 |
Private
3
Rep 60
Posts |
WTB: E92 rear console compartment/trim
The trim that surrounds the compartment in my car is looking pretty rough these days - does anyone have a spare that they don't need anymore that they are willing to sell? My interior is black... Thanks! |
12-08-2011, 03:04 PM | #3 |
First Lieutenant
18
Rep 348
Posts
Drives: 2016 340i M-Sport
Join Date: Sep 2010
Location: Atlanta, GA
|
I was looking for the same thing. no luck and $160-170 seemed high to me. so, i took it off, sanded it down and put about 5-6 coats of flat black krylon on it. it looks fantastic. be patient and sand very lightly between coats with ultra fine sandpaper. I tried plastic dip but that is too fragile, it kept peeling. worth a try.
|
Appreciate
0
|
12-08-2011, 03:15 PM | #4 |
Mr. Nice Says Hello
649
Rep 16,662
Posts
Drives: BMW M3 | X5 xdrive 35i MSport
Join Date: Dec 2008
Location: USA
|
contact VS Motorsports, they are stripping there e92 m3 to build into a race car, they might have some parts they want to part with
|
Appreciate
0
|
12-11-2011, 02:19 AM | #5 | |
Private
3
Rep 60
Posts |
Thanks for the tip. The price seemed a little bit ridiculous to be too, seeing that it's only the surrounding trim that's worn. What grit of sandpaper did you use? I'm afraid of ruining the piece, so I don't want to use anything too abrasive. Thanks!
Quote:
|
|
Appreciate
0
|
12-11-2011, 10:55 AM | #6 | |
Major General
757
Rep 6,878
Posts
Drives: 2014 BMW 435i X-drive
Join Date: Jul 2008
Location: Reston, VA
|
Quote:
How about wrapping it with matt black? If it looks bad, you can peal the wrap and you're back to where you are Or I'm pretty sure If the wrap is tight, and the edges are glued down from underneath You could spray the wrap So it's reversible
__________________
|
|
Appreciate
0
|
12-11-2011, 06:21 PM | #7 |
First Lieutenant
18
Rep 348
Posts
Drives: 2016 340i M-Sport
Join Date: Sep 2010
Location: Atlanta, GA
|
the wrap is actually a better idea. mine was peeling and scratched pretty bad and it showed through the wrap so one thing led to another and I started sanding. first w medium grit, then to fine, ultra fine. i used up to 1500 grit between paint coats. but if you have some good black wrap that would be much easier than painting..
|
Appreciate
0
|
Bookmarks |
|
|