BMW Performance - Euros - BBS CH - MTech

MuchMoore · 01-09-2012, 08:51 PM

I finally got the Performance front painted and installed so I decided to take a few shots. I'm looking for spoiler suggestions, so feedback is appreciated.

Mods:
Bilstein PSS9
BBS CH 19 x 8.5 ET35 (235/35 tire) and 19 x 9.5 ET40 (275/30 tire)
OEM M Technik Rear/Sides
OEM BMW Performance Front
OEM BMW Performance Ducting (brakes/engine)
OEM Euro Xenon AHLs
OEM Euro Split Armrest
OEM M3 DCT Wheel and Paddles
OEM M3 Strut Brace
OEM M Dead Pedal
OEM Blackline Tails
OEM BMW Performance Shift Boot
OEM BMW Performance E-Brake Boot/Handle
OEM BMW E46 M3 SMG Knob
OEM BMW Euro Rear Fog Switch
OEM LCI M Technik Diffuser
OEM Matte Black Window Trim
OEM X3 Silver Corner Bulbs
Matte Black Grills
LUX 5.1
3M CS 35% Tint
Hardwired Valentine One
BMC Drop-in Filter
Forge Motorsport Intercooler
Forge Motorsport Diverter Valves
Cobb AccessPORT (drive map)

Special thanks to:

Eric @ Supreme Power Parts - BBS CH

www.supremepowerparts.com

Frank @ Precision Sport - Bilstein PSS9/Forge Installs

www.precision-sport.com

Jason @ Tischer BMW - OEM Parts

www.getbmwparts.com

cvc 22349a · 01-09-2012, 09:25 PM

Very nice looking car! (too low for my taste tho) BBS CH look really good w/this car.
Is that front bumper for the LCI E90's? What do you do w/the fog lights? I want to copy your front/rear bumpers/side skirts..
I have the M3 spoiler but I think a painted BMW performance spoiler would look better on your car.

MuchMoore · 01-09-2012, 09:51 PM

Quote:

Originally Posted by cvc 22349a

Very nice looking car! (too low for my taste tho) BBS CH look really good w/this car.
Is that front bumper for the LCI E90's? What do you do w/the fog lights? I want to copy your front/rear bumpers/side skirts..
I have the M3 spoiler but I think a painted BMW performance spoiler would look better on your car.

Low is the only way you can go haha. The bumper is the Pre-LCI BMW Performance front, although it looks slightly similar to the LCI MTech. The fog lights are bundled and tied up under the bumper. I'm going to pick up a euro fog switch for an M3 so I can't accidentally turn them on.

Im on the fence about the spoiler, either way seems to be good...but I MUST HAVE perfect lol.

mapleridge · 01-10-2012, 12:59 AM

Definitely high on my list as one of the top e90's. I love the front bumper and the euro headlights. To finish it off I would say get a csl style boot lid. I love the kick up on the jbspeed one. I have it myself. Tiag beauty.

AllydNYC · 01-10-2012, 09:44 AM

Very clean!

I think all you need is a CSL trunk are you're done!

I will be going with the exact same wheel setup in the upcoming week. Will be wrapping my BBS CH in 275's as well. I know they're not an aggressive offset but wanted to know if you have any rubbing issues in the rear. Also, did you use spacers?

nichojo · 01-10-2012, 12:27 PM

Honestly I think a M3 spoiler is all you need (painted or CF). Your car is so clean I'd hate to see you throw something that would detract from the smooth lines it has and make the rear look gaudy (I'm looking at you Duke Dynamics). But yeah, a little CSL trunk lid or a lip spoiler would be icing on the cake. Smooth, simple, sexy.

01-09-2012, 08:51 PM	#1
MuchMoore Colonel 90 Rep 2,325 Posts Drives: 08 E90 335i Join Date: Jul 2008 Location: CenFla iTrader: (28)	BMW Performance - Euros - BBS CH - MTech - ETC I finally got the Performance front painted and installed so I decided to take a few shots. I'm looking for spoiler suggestions, so feedback is appreciated. Mods: Bilstein PSS9 BBS CH 19 x 8.5 ET35 (235/35 tire) and 19 x 9.5 ET40 (275/30 tire) OEM M Technik Rear/Sides OEM BMW Performance Front OEM BMW Performance Ducting (brakes/engine) OEM Euro Xenon AHLs OEM Euro Split Armrest OEM M3 DCT Wheel and Paddles OEM M3 Strut Brace OEM M Dead Pedal OEM Blackline Tails OEM BMW Performance Shift Boot OEM BMW Performance E-Brake Boot/Handle OEM BMW E46 M3 SMG Knob OEM BMW Euro Rear Fog Switch OEM LCI M Technik Diffuser OEM Matte Black Window Trim OEM X3 Silver Corner Bulbs Matte Black Grills LUX 5.1 3M CS 35% Tint Hardwired Valentine One BMC Drop-in Filter Forge Motorsport Intercooler Forge Motorsport Diverter Valves Cobb AccessPORT (drive map) Special thanks to: Eric @ Supreme Power Parts - BBS CH www.supremepowerparts.com Frank @ Precision Sport - Bilstein PSS9/Forge Installs www.precision-sport.com Jason @ Tischer BMW - OEM Parts www.getbmwparts.com __________________ \| Andrew \| M Technik \| BMW Performance \| BBS \| Forge \| V1 \| LUX \| Bilstein \| Precision-Sport \|
	Appreciate 0 Tweet Quote

01-09-2012, 09:25 PM	#2
cvc 22349a Colonel 166 Rep 2,556 Posts Drives: 335i Join Date: Sep 2007 Location: SF Bay iTrader: (11)	Very nice looking car! (too low for my taste tho) BBS CH look really good w/this car. Is that front bumper for the LCI E90's? What do you do w/the fog lights? I want to copy your front/rear bumpers/side skirts.. I have the M3 spoiler but I think a painted BMW performance spoiler would look better on your car. __________________ 2007 E90 335i, TiAg, 6AT, ZPP, ZSP, ZCW, 6FL, HD Quaife lsd, ETS fmic, GIAC s/w, Dinan intake/exhaust/oc, Koni/M3 susp, Apex Arc 8, Mich PSS
	Appreciate 0 Quote

01-10-2012, 12:59 AM	#4
mapleridge Banned 158 Rep 2,638 Posts Drives: E90 N52 AT Join Date: Apr 2011 Location: Vancouver, BC iTrader: (4)	Definitely high on my list as one of the top e90's. I love the front bumper and the euro headlights. To finish it off I would say get a csl style boot lid. I love the kick up on the jbspeed one. I have it myself. Tiag beauty.
	Appreciate 0 Quote

01-10-2012, 09:44 AM	#5
AllydNYC Loading... 377 Rep 2,187 Posts Drives: 91' E30 318is Join Date: Apr 2008 Location: Location iTrader: (15) Garage List 1991 BMW 318is [0.00]	Very clean! I think all you need is a CSL trunk are you're done! I will be going with the exact same wheel setup in the upcoming week. Will be wrapping my BBS CH in 275's as well. I know they're not an aggressive offset but wanted to know if you have any rubbing issues in the rear. Also, did you use spacers?
	Appreciate 0 Quote

01-10-2012, 12:27 PM	#6
nichojo Lieutenant 15 Rep 417 Posts Drives: 2011 328i Join Date: Oct 2010 Location: Atlanta, GA iTrader: (1)	Honestly I think a M3 spoiler is all you need (painted or CF). Your car is so clean I'd hate to see you throw something that would detract from the smooth lines it has and make the rear look gaudy (I'm looking at you Duke Dynamics). But yeah, a little CSL trunk lid or a lip spoiler would be icing on the cake. Smooth, simple, sexy.
	Appreciate 0 Quote