JB4 Installed.

catcher22 · 02-22-2012, 12:03 PM

Was able to upgrade from JB3 to JB4 last night and take it for a spin. Overall, I'm very happy with it! Was too tired after the install so I only drove for about 15 minutes and it's still adapting to the tune.

The install did not go smooth because I rushed and simply didn't pay attention to detail. On the first attempt, I found I connected the large black connector backwards. Fixed that. Then I found that I reinserted the power wire into the incorrect position, so it wasn't getting power! Fixed that. Then I realized I hadn't pushed the connector back into the DME far enough, so fixed that. All three times were the same symptoms - engine wouldn't start. You can imagine how happy I was after I installed it right.

So for those of you who have install problems, three easy areas to overlook are above!!

AC792 · 02-22-2012, 06:06 PM

Let us know what you think!

BES335xi · 02-22-2012, 08:49 PM

Nice, upgrade to 2/7 firmware you'll love it.

Randomaccess335 · 02-22-2012, 08:51 PM

That's funny...... Cause I made 2 mistakes when I upgraded mine. I caught mine before install. I was in such a rush my beautiful soon to be pita wife asked if I did it right, so of course I wanted to prove her wrong and that's when I found my mistakes

Anyway I love mine,
R

02-22-2012, 12:03 PM	#1
catcher22 Captain 294 Rep 922 Posts Drives: 2008 335xi Coupe Join Date: May 2008 Location: Virginia iTrader: (2)	JB4 Installed. Was able to upgrade from JB3 to JB4 last night and take it for a spin. Overall, I'm very happy with it! Was too tired after the install so I only drove for about 15 minutes and it's still adapting to the tune. The install did not go smooth because I rushed and simply didn't pay attention to detail. On the first attempt, I found I connected the large black connector backwards. Fixed that. Then I found that I reinserted the power wire into the incorrect position, so it wasn't getting power! Fixed that. Then I realized I hadn't pushed the connector back into the DME far enough, so fixed that. All three times were the same symptoms - engine wouldn't start. You can imagine how happy I was after I installed it right. So for those of you who have install problems, three easy areas to overlook are above!!
	Appreciate 0 Tweet Quote

02-22-2012, 06:06 PM	#2
AC792 Lieutenant 63 Rep 541 Posts Drives: 2012 F30 335i Join Date: Jan 2012 Location: Milwaukee, WI iTrader: (4)	Let us know what you think! __________________ Now: 2012 F30 335i / 6MT / JB4 / ER Catless DP Sold: 2010 Jeep GC SRT8 Sold: 2007 E90 335i / 6MT / JB4 / Vishnu Exhaust / VMR 710 19" / BMS DCI / HKS Blow Off Valve / Tinted Tails / Clutch Stop
	Appreciate 0 Quote

02-22-2012, 08:49 PM	#3
BES335xi Colonel 92 Rep 2,132 Posts Drives: FBO+ N54xi Join Date: Mar 2008 Location: Queens, NYC iTrader: (4) Garage List 03/07 E90 335xi [1.00]	Nice, upgrade to 2/7 firmware you'll love it. __________________ JB4+usb \| P3 Vent Boost Gauge v2 \| BMS OCC \| BMS DCI \| AMS FMIC \| AR xi CL DP's \| BT Tool \| Edibias/NCSExpert/INPA BMW Coding \| Cyba Quad Exhaust tips \| M-Tech Rear & M3 Front Bumper \| Red Cyba Air Scoops \| Blacklines \| Vinyl Overlays \| ACS Roof Spoiler \| Matte Black Grilles \| LED Side Mirrors \| Rear Euro Fogs \| etc.. .
	Appreciate 0 Quote

02-22-2012, 08:51 PM	#4
Randomaccess335 Captain 69 Rep 868 Posts Drives: 07' 335I Join Date: Mar 2011 Location: boynton beach, Fl iTrader: (11)	That's funny...... Cause I made 2 mistakes when I upgraded mine. I caught mine before install. I was in such a rush my beautiful soon to be pita wife asked if I did it right, so of course I wanted to prove her wrong and that's when I found my mistakes Anyway I love mine, R __________________ JB4 G5 ISO , AR DP's, DO Meth kit Trunk Mount, ETS 5" Intercooler, M6 Rims, ER Charge Pipe, Fordged DV's, MMp relocated inlets, Ebay 4" chrome Tips, Lux Angel Eyes ********11.910 @ 117.091.851 60'*********
	Appreciate 0 Quote