Sponsored by The Tire Rack

[SPGspeed]

Hey guys rented a fender roller for a few days. Question on fitment. Im lowered on h&r sports with this tire / wheel setup:

Front: hankook 235 35 19 on 19×8.5 et35
rear: hankook 265 30 19 on 19×9.5 et35

Without rubbing at all whats the furthest i can go out? I take a full car on road trims so i dont want issues with a packed car rubbing

Thanks!

[BoostedE90]

with a good roll you should be able to run +20 front and rear and avoid rubbing. If you wanna play it safe stay around +22 or +25.

[SPGspeed]

Thanks,

Did some rolling tonight, I cant get the rear fenders to roll / pinch well. They have some kind of goop behind it preventing the fender to fold properly,

any ideas?

[brakeboost]

I just did mine last night, I cleaned all of the black crap out and rolled it just a bit, I'm running 275/30/19 on the rear 9.5 rear wheels. I first put a set of 275/45/19's on that I had off of my 750li that rubbed so bad I could not drive lol.

[Babydragon]

Originally Posted by brakeboost

I just did mine last night, I cleaned all of the black crap out and rolled it just a bit, I'm running 275/30/19 on the rear 9.5 rear wheels. I first put a set of 275/45/19's on that I had off of my 750li that rubbed so bad I could not drive lol.

What off set are you running. I have the same size tire, I'm dropped, but I want to add a spacer on an et 33 wheel.

[SPGspeed]

Originally Posted by brakeboost

I just did mine last night, I cleaned all of the black crap out and rolled it just a bit, I'm running 275/30/19 on the rear 9.5 rear wheels. I first put a set of 275/45/19's on that I had off of my 750li that rubbed so bad I could not drive lol.

What did you use to clean that out... did you have to take the fender liner out?

Do you have any issues with the mounting tab from the rear bumper to the fender?

[._.]

Originally Posted by brakeboost

I just did mine last night, I cleaned all of the black crap out and rolled it just a bit, I'm running 275/30/19 on the rear 9.5 rear wheels. I first put a set of 275/45/19's on that I had off of my 750li that rubbed so bad I could not drive lol.

You had to roll you fenders to fit 275/30/19 on a 9.5? What are you offsets? I am lowered with 19x9.5 ET 35 with 275/30/19 and I am looking to add 15 mm spacers out back after rolling.

[SPGspeed]

It sounds like we are in the same boat. You have to somehow remove that blak crap to get the fender lip to fold properly. I measure last night after rolling. It seems like i can get a 10mm on my rears now making it et25 with my 9.5 and 265 tire. I wish i couls get a 12mm or 15mm but with 4 ppl in the car and a full tank it doesnt look like it