[vertigo44]

I am getting ready to pull the trigger on buying either Proceed, JB4, or Cobb.

In order of priority...

1. Data Logging / Trouble shooting (Which product will provide the most information to help troubleshoot issues)
2. PWM integration (The last thing I've read is that the PWM kit is the safest kit out there and is INSTANT ON no dribbling / ramping up). Does the BMS kit have the same features as the PWM kit? Also, from looking at the tune comparision chart, Cobb doesn't support meth..? Is this right?

Thanks!

[RambleJ]

Originally Posted by vertigo44

I am getting ready to pull the trigger on buying either Proceed, JB4, or Cobb.

In order of priority...

1. Data Logging / Trouble shooting (Which product will provide the most information to help troubleshoot issues)
2. PWM integration (The last thing I've read is that the PWM kit is the safest kit out there and is INSTANT ON no dribbling / ramping up). Does the BMS kit have the same features as the PWM kit? Also, from looking at the tune comparision chart, Cobb doesn't support meth..? Is this right?

Thanks!

Wow you really bought the scare tactics??
I would suggest doing some more research before you pull the trigger. Also, if I were in the market for a tune, out of the 3 you listed I would go with Cobb.

[scottro]

I am happy with my procede and pwm meth integration, and I do quite a bit of data logging. I had originally just bought the procede and then installed the meth kit a few months later. I went with the PWM kit from Vishnu because of the integration with the procede.

[rader1]

Originally Posted by vertigo44

I am getting ready to pull the trigger on buying either Proceed, JB4, or Cobb.

In order of priority...

1. Data Logging / Trouble shooting (Which product will provide the most information to help troubleshoot issues)
2. PWM integration (The last thing I've read is that the PWM kit is the safest kit out there and is INSTANT ON no dribbling / ramping up). Does the BMS kit have the same features as the PWM kit? Also, from looking at the tune comparision chart, Cobb doesn't support meth..? Is this right?

Thanks!

1) Cobb has the best datalogging currently available. As far as customer support goes it's probably a dead heat between Cobb and BMS.

2) PWM is a very nice way of doing meth, however it's available on more setups than just the Vishnu PWM kit. Aquamist HFS-3 and 4 are both PWM meth kits and will work with any tune.

[amill411]

I've been very happy with my JB4 + BMS meth kit. Haven't had any problems whatsoever, data logging is easy and has quite a few options. Not to mention Terry's customer service at BMS is superb.