are my fenders already rolled?

ahwest · 04-23-2012, 10:32 PM

recently bought my e92 and try to figure out if the fenders are already rolled?

jdhart73 · 04-24-2012, 12:50 AM

Maybe with a baseball bat. They are cracked and look like they were not done correctly if indeed they are rolled. I would say someone attempted it with the wrong tools, not all is lost though as you should be able to heat them up and roll them flat.

ahwest · 05-04-2012, 12:18 PM

so I test fitted 10mm spacers for the rear... it's rubbing a little bit but it seems that it's only rubbing on the fender lining not the fender itself... there's already a hole on the fender lining due to rubbing...does anyone have the same experience? is there anything I can do to eliminate that?

edirtaynine · 05-04-2012, 01:26 PM

the rear fenders come "rolled" like that already. its basically a super conservative roll. you can go check out a brand new one with 0 miles at the dealer to see for yourself.

Ghost170 · 05-04-2012, 02:51 PM

^ +1

ahwest · 05-04-2012, 03:04 PM

how do you guys fix the rubbing lining issue?

#Tee · 05-04-2012, 03:10 PM

You let the carpet lining rub itself til its all busted up or cut it yourself. You go low n flush you gotta do whatever it takes. This is just a small obstacle.

ahwest · 05-04-2012, 05:13 PM

thanks for the input! gotta do some cutting tonite!

Andrewe92 · 05-04-2012, 06:39 PM

Yeah def cut ..

04-23-2012, 10:32 PM	#1
ahwest Private 8 Rep 92 Posts Drives: E90 LCI Join Date: Dec 2011 Location: San Jose iTrader: (0)	are my fenders already rolled? recently bought my e92 and try to figure out if the fenders are already rolled?
	Appreciate 0 Tweet Quote

04-24-2012, 12:50 AM	#2
jdhart73 Private 1 Rep 54 Posts Drives: 2008 BMW 335i Join Date: Mar 2012 Location: Kansas iTrader: (2)	Maybe with a baseball bat. They are cracked and look like they were not done correctly if indeed they are rolled. I would say someone attempted it with the wrong tools, not all is lost though as you should be able to heat them up and roll them flat.
	Appreciate 0 Quote

05-04-2012, 12:18 PM	#3
ahwest Private 8 Rep 92 Posts Drives: E90 LCI Join Date: Dec 2011 Location: San Jose iTrader: (0)	so I test fitted 10mm spacers for the rear... it's rubbing a little bit but it seems that it's only rubbing on the fender lining not the fender itself... there's already a hole on the fender lining due to rubbing...does anyone have the same experience? is there anything I can do to eliminate that?
	Appreciate 0 Quote

05-04-2012, 01:26 PM	#4
edirtaynine Major General 84 Rep 6,088 Posts Drives: e92 Join Date: Mar 2011 Location: SoCal iTrader: (0)	the rear fenders come "rolled" like that already. its basically a super conservative roll. you can go check out a brand new one with 0 miles at the dealer to see for yourself.
	Appreciate 0 Quote

05-04-2012, 02:51 PM	#5
Ghost170 Brigadier General 89 Rep 3,355 Posts Drives: VIP Sport 335! Join Date: Aug 2007 Location: N CA iTrader: (8) Garage List 2007 BMW e92 335! [6.34]	^ +1 __________________ *07 E92 335!* AA AE GP HR LC M3 KW BMS BMW LUX CYBA STRI WORK HELIX MTECH LSWEEE(Wavetrac)!
	Appreciate 0 Quote

05-04-2012, 03:04 PM	#6
ahwest Private 8 Rep 92 Posts Drives: E90 LCI Join Date: Dec 2011 Location: San Jose iTrader: (0)	how do you guys fix the rubbing lining issue?
	Appreciate 0 Quote

05-04-2012, 03:10 PM	#7
#Tee Major General 564 Rep 5,366 Posts Drives: yes Join Date: Oct 2011 Location: Socal iTrader: (2)	You let the carpet lining rub itself til its all busted up or cut it yourself. You go low n flush you gotta do whatever it takes. This is just a small obstacle. __________________ You can follow my builds on IG: Tee212
	Appreciate 0 Quote

05-04-2012, 05:13 PM	#8
ahwest Private 8 Rep 92 Posts Drives: E90 LCI Join Date: Dec 2011 Location: San Jose iTrader: (0)	thanks for the input! gotta do some cutting tonite!
	Appreciate 0 Quote

05-04-2012, 06:39 PM	#9
Andrewe92 enthusiast 120 Rep 997 Posts Drives: 2011 e92 lci 335xi Join Date: Feb 2012 Location: NJ iTrader: (0) Garage List 2011 bmw 335 xdrive [10.00]	Yeah def cut ..
	Appreciate 0 Quote