|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Phone and Assist Options Restarts with "-- --"
|
|
05-08-2012, 12:05 PM | #1 |
Lieutenant Colonel
158
Rep 1,677
Posts |
Phone and Assist Options Restarts with "-- --"
Can anyone help me diagnose a problem with my e92 non i-Drive? This causes my Bluetooth to drop and reconnect. When I press the Menu button, I see the Phone and Assist icons but after a few seconds, it will restart, causing the icons to disappear as "-- --". It does this in a loop.
Here's what I have tried:
Last edited by blisstik; 05-08-2012 at 12:17 PM.. |
05-09-2012, 12:56 PM | #2 |
Lieutenant Colonel
158
Rep 1,677
Posts |
Digging a little deeper, I got the following codes:
A554 Alive telephone Error will not cause a warning light Error is not currently present Test conditions have been completed E18D Wake Up Device tried to wake up network 3-times without success (Error_WakeUp_Failed) Error will not cause a warning light Error is not currently present Test conditions have been completed E18F Central registry does not match with debit configuration (Error_Registry_New) Error will not cause a warning light Error is not currently present Test conditions have been completed Searching "a554 bmw" on Google led me to this: http://forums.5series.net/topic/4923...-call-failure/ I have a RAD2 vehicle so the possible causes are: - TCU hardware failure - MOST-bus communication issue - Incompatible handset - 'TCUs can be "deactivated" accidently during a "reactivation" process after a software upgrade' - Software error in the RAD2 or CCC I can probably rule out incompatible handset. Anyone know how to "reactivate" a TCU? Thru coding only? |
Appreciate
0
|
05-11-2012, 07:36 PM | #3 |
Lieutenant Colonel
158
Rep 1,677
Posts |
Quick update. I bought a used TCU from a member here. Plugged it in and Bluetooth is now working again without drops. I did not have it coded as I don't use BMW Assist.
|
Appreciate
0
|
Bookmarks |
|
|