what you think about these logs

dirtmaster666 · 05-27-2012, 01:50 PM

hey folks here is a log with the procede i took today. what you think?

these are stage 3 4-23 aggressive

input is much appreciated

thanks

rader1 · 05-27-2012, 01:58 PM

Looks good

dirtmaster666 · 05-27-2012, 02:08 PM

Quote:

Originally Posted by rader1

Looks good

That's kind of what I thought but wasn't sure. I also see my fuel trim seem to sit at 34 percent. Is that bad. If so is there a way to adjust that. Sorry I new to tuning

rader1 · 05-27-2012, 02:25 PM

34% is maxxed out. Try to increase you OL fueling a bit. Im not really familiar with the the PROcede, but IIRC you want the trims to be roughly 15. Everything else looks good.

805beemer · 05-27-2012, 02:53 PM

Quote:

Originally Posted by rader1

34% is maxxed out. Try to increase you OL fueling a bit. Im not really familiar with the the PROcede, but IIRC you want the trims to be roughly 15. Everything else looks good.

Other than the fact that his AFR is 16.71:1 while running 17lbs of boost. He needs to rescale it so we can see what it is for the entire pull.

rader1 · 05-27-2012, 03:15 PM

I saw that, but the graph looked goofy and I don't know if that's accurate. Of coarse, with his trims maxxed out it might be.

dirtmaster666 · 05-27-2012, 03:36 PM

I think my open loop is at 75. So going up to say 85 should help my fuel?

rader1 · 05-27-2012, 03:42 PM

w

Quote:

Originally Posted by dirtmaster666

I think my open loop is at 75. So going up to say 85 should help my fuel?

Try that, however I've seen several people get timing drops when OL fueling is increased

dirtmaster666 · 05-27-2012, 03:48 PM

Quote:

Originally Posted by rader1

w

Quote:

Originally Posted by dirtmaster666

I think my open loop is at 75. So going up to say 85 should help my fuel?

Try that, however I've seen several people get timing drops when OL fueling is increased

I log and see what happens

plague · 05-27-2012, 04:22 PM

as far as i remember OL fueling was set at 90 standard. I adjusted mine to 100% to correct trims on my logs. worked for me idk.

dirtmaster666 · 05-27-2012, 08:58 PM

Quote:

Originally Posted by plague

as far as i remember OL fueling was set at 90 standard. I adjusted mine to 100% to correct trims on my logs. worked for me idk.

The new maps were default to 75.

05-27-2012, 01:50 PM	#1
dirtmaster666 "J" BONE 38 Rep 578 Posts Drives: 2007 335i Join Date: Jan 2010 Location: edmonton iTrader: (0)	what you think about these logs hey folks here is a log with the procede i took today. what you think? these are stage 3 4-23 aggressive input is much appreciated thanks Attached Images __________________ procede v5 rev3, afe dual cone intake, full catless exhaust with muffler delete, hm style carbon fibre lip, 235/35/19,275/30/19 satin black linea corse818, H&R sport springs, Vishnu charge pipe with forged diverter valves, matte black kidneys, mtec superwhite angel eyes and fogs, bms cdv ER fmic, VRSF coated DP. Vishnu pwm meth kit
	Appreciate 0 Tweet Quote

05-27-2012, 01:58 PM	#2
rader1 Banned 71 Rep 2,197 Posts Drives: Cobb Stage 2+ 135i Join Date: Apr 2011 Location: Roanoke, VA iTrader: (0)	Looks good
	Appreciate 0 Quote

05-27-2012, 02:25 PM	#4
rader1 Banned 71 Rep 2,197 Posts Drives: Cobb Stage 2+ 135i Join Date: Apr 2011 Location: Roanoke, VA iTrader: (0)	34% is maxxed out. Try to increase you OL fueling a bit. Im not really familiar with the the PROcede, but IIRC you want the trims to be roughly 15. Everything else looks good.
	Appreciate 0 Quote

05-27-2012, 03:15 PM	#6
rader1 Banned 71 Rep 2,197 Posts Drives: Cobb Stage 2+ 135i Join Date: Apr 2011 Location: Roanoke, VA iTrader: (0)	I saw that, but the graph looked goofy and I don't know if that's accurate. Of coarse, with his trims maxxed out it might be.
	Appreciate 0 Quote

05-27-2012, 03:36 PM	#7
dirtmaster666 "J" BONE 38 Rep 578 Posts Drives: 2007 335i Join Date: Jan 2010 Location: edmonton iTrader: (0)	I think my open loop is at 75. So going up to say 85 should help my fuel? __________________ procede v5 rev3, afe dual cone intake, full catless exhaust with muffler delete, hm style carbon fibre lip, 235/35/19,275/30/19 satin black linea corse818, H&R sport springs, Vishnu charge pipe with forged diverter valves, matte black kidneys, mtec superwhite angel eyes and fogs, bms cdv ER fmic, VRSF coated DP. Vishnu pwm meth kit
	Appreciate 0 Quote

05-27-2012, 04:22 PM	#10
plague Captain 44 Rep 957 Posts Drives: 335i sold :( / jb 20th AE Join Date: Mar 2011 Location: NJ iTrader: (2)	as far as i remember OL fueling was set at 90 standard. I adjusted mine to 100% to correct trims on my logs. worked for me idk. __________________ 07 335i- SOLD, and will be missed... Parts for sale- PWM meth kit, M steering wheel, M shift knob, perforated e brake handle
	Appreciate 0 Quote