Help！ Firmware update failure

diddlkiss · 06-02-2012, 09:24 PM

confused0068:I failed updating my firmware and the car can not start up. However, I cannot access the Procede by my PC unless I get the ignition on! Thus the only way to drive is take off the Procede and drive without it. Can anyone help me to solve this issue?
By the way, I'm in China where's no customer service and very hard to access Youtube...
If I can connect to Procede without strat the car, I think I will be able to update the firmware again and everything will be alright. But, I can not connect it without ignition on...
Beside， I highly doubt if I connect all the cable right as I'm not sure what those 3 cables used for, in the Pic attached show...
*PS, I have tried the USB power things already, they seems not work.

sickem · 06-02-2012, 09:52 PM

To update firmware the ignition should be on, but the car shouldn't. You put the key in and press the start button without your foot on the brake (or clutch if you're a 6mt).

enrita · 06-03-2012, 04:38 AM

3 goes to the procede.
1/2 : one is for meth flow and one maybe for the remote? which procede is that?

diddlkiss · 06-03-2012, 10:25 AM

Quote:

Originally Posted by enrita

3 goes to the procede.
1/2 : one is for meth flow and one maybe for the remote? which procede is that?

My procede is v5 rev3.
My car is 2010 E90 LCI 335i 6AT.

diddlkiss · 06-03-2012, 10:26 AM

Quote:

Originally Posted by enrita

3 goes to the procede.
1/2 : one is for meth flow and one maybe for the remote? which procede is that?

N54

06-02-2012, 09:24 PM	#1
diddlkiss Second Lieutenant 18 Rep 283 Posts Drives: 2010 335i E90 Lci N54 Join Date: May 2012 Location: San Jose iTrader: (0) Garage List 2015 F33 435i [0.00] 2015 F82 M4 [0.00] 2011 F10 535i [0.00] 2010 BMW E90 LCI 335i [7.50]	Help！ Firmware update failure confused0068:I failed updating my firmware and the car can not start up. However, I cannot access the Procede by my PC unless I get the ignition on! Thus the only way to drive is take off the Procede and drive without it. Can anyone help me to solve this issue? By the way, I'm in China where's no customer service and very hard to access Youtube... If I can connect to Procede without strat the car, I think I will be able to update the firmware again and everything will be alright. But, I can not connect it without ignition on... Beside， I highly doubt if I connect all the cable right as I'm not sure what those 3 cables used for, in the Pic attached show... *PS, I have tried the USB power things already, they seems not work. Attached Images
	Appreciate 0 Tweet Quote

06-02-2012, 09:52 PM	#2
sickem Freude am fahren 72 Rep 1,968 Posts Drives: E90 N54 Join Date: Mar 2010 Location: Doylestown, PA iTrader: (4) Garage List 2008 BMW 335i E90 [6.50]	To update firmware the ignition should be on, but the car shouldn't. You put the key in and press the start button without your foot on the brake (or clutch if you're a 6mt). __________________ Cobb E40 PROtune by Jake@PTF/RR catless DPs/aFe DCI/ETS 5" FMIC/ER CP/Forge DVs/Alpina B3 TCU flash/BMW Perf. Exhaust./BMW Performance Style 313s/M-Tech Rear
	Appreciate 0 Quote

06-03-2012, 04:38 AM	#3
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	3 goes to the procede. 1/2 : one is for meth flow and one maybe for the remote? which procede is that? __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote