ETS charge pipe installed, but are there meth BUNGS?

woptang22 · 06-22-2012, 06:17 PM

My car is in the shop getting an Aquamist HFS-3 kit installed and COBB ATR pro tune. I have a pic of the ETS chargepipe installed, but I dont see the meth bungs/nozzles. Or am I just missing them? Pic attached.

Lulz_M3 · 06-22-2012, 06:45 PM

I see two nozzles just beneath the white tubing.

benzy89 · 06-22-2012, 06:54 PM

+1 look like to screws from the overhead shot but those are the meth bungs. There's no lines being run to them right now that's all.

woptang22 · 06-22-2012, 07:13 PM

Thanks guys, just wasnt sure. lol

dbjb · 06-23-2012, 10:20 AM

Not trying to be a dick but being as you asked this question.... I highly suggest you become more familiar with methanol before running it. I would hate to see something catastrophic happen because you're unaware of the basics.

woptang22 · 06-23-2012, 10:31 AM

Quote:

Originally Posted by dsbj

Not trying to be a dick but being as you asked this question.... I highly suggest you become more familiar with methanol before running it. I would hate to see something catastrophic happen because you're unaware of the basics.

Yeah I hear what your saying. I dont know much about the install on a meth kit. I am not mechanically inclined so thats why Im not doing this install. The reason I asked about the meth bungs is because every other charge pipe Ive seen with meth bungs seem to have them spaced out alot more. Thats why I wasnt sure if they were there. But your right I probably should learn a little more about the setup.

Eracer76 · 06-23-2012, 10:42 AM

I agree with dsbj... if your going to run meth, you should probably learn a little more about it and become familiar with your set up.

If your car is in the shop, couldn't they figure where the meth bungs were either?
If so, that sure doesn't say much about the shop who is installing a meth kit!

woptang22 · 06-23-2012, 11:36 AM

The shop sent me the pic so I could see how the charge pipe looks in the car. They welded the meth bungs in, but I didnt know that until I asked. But I plan on having them go over everything with me when the car is done. To show me the setup. The charge pipes Ive seen with meth bungs, seem to have been farther apart. So I wasnt sure.

Quote:

Originally Posted by Eracer76

I agree with dsbj... if your going to run meth, you should probably learn a little more about it and become familiar with your set up.

If your car is in the shop, couldn't they figure where the meth bungs were either?
If so, that sure doesn't say much about the shop who is installing a meth kit!

plague · 06-23-2012, 06:59 PM

what shop, VAC? i see youre in philly, im 15 mins away.. id help install your kit if need be, unless its all done already.

06-22-2012, 06:17 PM	#1
woptang22 Major 175 Rep 1,247 Posts Drives: 2009 E92 BMW M3 Join Date: Nov 2011 Location: Bristol Pa iTrader: (1)	ETS charge pipe installed, but are there meth BUNGS? My car is in the shop getting an Aquamist HFS-3 kit installed and COBB ATR pro tune. I have a pic of the ETS chargepipe installed, but I dont see the meth bungs/nozzles. Or am I just missing them? Pic attached. Attached Images __________________ 2009 E92 BMW M3.
	Appreciate 0 Tweet Quote

06-22-2012, 06:45 PM	#2
Lulz_M3 Banned 33 Rep 1,029 Posts Drives: AW 335i 6MT Join Date: Oct 2011 Location: Jax, Fl iTrader: (0)	I see two nozzles just beneath the white tubing.
	Appreciate 0 Quote

06-22-2012, 06:54 PM	#3
benzy89 Banned 83 Rep 2,396 Posts Drives: '08 E90 335i Join Date: Jan 2012 Location: Northern NJ iTrader: (3) Garage List 2008 BMW 335i [7.50]	+1 look like to screws from the overhead shot but those are the meth bungs. There's no lines being run to them right now that's all.
	Appreciate 0 Quote

06-22-2012, 07:13 PM	#4
woptang22 Major 175 Rep 1,247 Posts Drives: 2009 E92 BMW M3 Join Date: Nov 2011 Location: Bristol Pa iTrader: (1)	Thanks guys, just wasnt sure. lol __________________ 2009 E92 BMW M3.
	Appreciate 0 Quote

06-23-2012, 10:20 AM	#5
dbjb I sweat pheromones 209 Rep 2,103 Posts Drives: e92 335i, retired SLK55 Join Date: Jul 2009 Location: NorCal iTrader: (25)	Not trying to be a dick but being as you asked this question.... I highly suggest you become more familiar with methanol before running it. I would hate to see something catastrophic happen because you're unaware of the basics.
	Appreciate 0 Quote

06-23-2012, 10:42 AM	#7
Eracer76 First Lieutenant 64 Rep 370 Posts Drives: 2009 E89 Z4 35i Join Date: Nov 2011 Location: IL iTrader: (5)	I agree with dsbj... if your going to run meth, you should probably learn a little more about it and become familiar with your set up. If your car is in the shop, couldn't they figure where the meth bungs were either? If so, that sure doesn't say much about the shop who is installing a meth kit! __________________ 2009 Z4 35i 6mt, SpeedTech 6266 Gen2 turbo kit, Tial WG, VRSF 7.5 race IC, ER charge pipe, Tial BOV, Radium Fuel cell w/ surge tank and twin Walbro 525 pumps, Radium FPR and return line, Bluetooth ethanol sensor, Phoenix intake manifold w/PI, JB4 tuner, PR coil packs, Custom oil cooler, ECS Radiator, Spec 3+clutch, Mfactory flywheel, single 3.5" into dual 3" exhaust, H&R springs, 19" TSW wheels, 235/19 & 275/19 RE11 tires
	Appreciate 0 Quote

06-23-2012, 06:59 PM	#9
plague Captain 42 Rep 957 Posts Drives: 335i sold :( / jb 20th AE Join Date: Mar 2011 Location: NJ iTrader: (2)	what shop, VAC? i see youre in philly, im 15 mins away.. id help install your kit if need be, unless its all done already. __________________ 07 335i- SOLD, and will be missed... Parts for sale- PWM meth kit, M steering wheel, M shift knob, perforated e brake handle
	Appreciate 0 Quote