Question about installing Procede new firmware

qdtjant · 07-27-2012, 01:30 AM

I'm new to installing and using the Procede software. I do have a V5 Rev 3 unit. After dowloading the firmavare and the ECU is to reset, the status bar in the User Tuning Interface, (5.34) stays red. Do you have to manually go offline/online to continue futher on with step 3 ?
My lap top is connected to the wall and I have a charger connected to the 1M's battery. Which is the lowest level to be safe ? I did have 12,5 V.

Please help so I can have fun !

/Janne

qdtjant · 07-27-2012, 04:08 AM

When reading the firmware version from the user software it shows:
Firmware Series No: 105
Firmware Version Info: 111

Is thsi the latest firmware version ?

/Janne

plague · 07-27-2012, 05:01 AM

no you dont have to manually go offline. i usually upload new maps not plugged in actually and works fine. ?

JamesM3M5 · 07-27-2012, 09:50 AM

Firmware version 111 is the latest, included with 4-23 and 5-23 aggressive beta maps.

qdtjant · 07-27-2012, 12:07 PM

Thanks, Then we are on the latest firmware.
/Janne

qdtjant · 07-28-2012, 08:24 AM

Today we had it to go and it works fine, until I got a half engine light under WOT.
But it's hot today 26 C. I did push it quite hard enjoying the new power. The half engine was gone when I restarted after 10 minutes of cooling down.

Have tried to get some response from the Vishnu team, no sign of life, gone fishing ???
Are there any special settings for 1M, yet stage 1 ?

/Janne

fl335i · 08-15-2012, 09:06 PM

I'm having the same issue as you today. When I upload the new firmware it just stays red saying ECU resetting or whatever. So I manually on/off'd, and then did the map upload. I spent like 1hr this evening trying to figure this out. What is the answer? Obviously its happening to more than one person.

07-27-2012, 01:30 AM	#1
qdtjant Private First Class 67 Rep 180 Posts Drives: BMW Alpina D5S 2018 Join Date: Aug 2006 Location: Sweden iTrader: (0)	Question about installing Procede new firmware I'm new to installing and using the Procede software. I do have a V5 Rev 3 unit. After dowloading the firmavare and the ECU is to reset, the status bar in the User Tuning Interface, (5.34) stays red. Do you have to manually go offline/online to continue futher on with step 3 ? My lap top is connected to the wall and I have a charger connected to the 1M's battery. Which is the lowest level to be safe ? I did have 12,5 V. Please help so I can have fun ! /Janne __________________ BMW Alpina D5S Touring 2018 BMW Alpina B5 Edition 50 2015 /Janne
	Appreciate 0 Tweet Quote

07-27-2012, 04:08 AM	#2
qdtjant Private First Class 67 Rep 180 Posts Drives: BMW Alpina D5S 2018 Join Date: Aug 2006 Location: Sweden iTrader: (0)	When reading the firmware version from the user software it shows: Firmware Series No: 105 Firmware Version Info: 111 Is thsi the latest firmware version ? /Janne __________________ BMW Alpina D5S Touring 2018 BMW Alpina B5 Edition 50 2015 /Janne
	Appreciate 0 Quote

07-27-2012, 05:01 AM	#3
plague Captain 42 Rep 957 Posts Drives: 335i sold :( / jb 20th AE Join Date: Mar 2011 Location: NJ iTrader: (2)	no you dont have to manually go offline. i usually upload new maps not plugged in actually and works fine. ? __________________ 07 335i- SOLD, and will be missed... Parts for sale- PWM meth kit, M steering wheel, M shift knob, perforated e brake handle
	Appreciate 0 Quote

07-27-2012, 09:50 AM	#4
JamesM3M5 Some dude 92 Rep 1,780 Posts Drives: E92 335i Join Date: Sep 2011 Location: Northern VA iTrader: (0)	Firmware version 111 is the latest, included with 4-23 and 5-23 aggressive beta maps. __________________ RRT E92 335i/6MT with stuff and things
	Appreciate 0 Quote

07-27-2012, 12:07 PM	#5
qdtjant Private First Class 67 Rep 180 Posts Drives: BMW Alpina D5S 2018 Join Date: Aug 2006 Location: Sweden iTrader: (0)	Thanks, Then we are on the latest firmware. /Janne __________________ BMW Alpina D5S Touring 2018 BMW Alpina B5 Edition 50 2015 /Janne
	Appreciate 0 Quote

07-28-2012, 08:24 AM	#6
qdtjant Private First Class 67 Rep 180 Posts Drives: BMW Alpina D5S 2018 Join Date: Aug 2006 Location: Sweden iTrader: (0)	Today we had it to go and it works fine, until I got a half engine light under WOT. But it's hot today 26 C. I did push it quite hard enjoying the new power. The half engine was gone when I restarted after 10 minutes of cooling down. Have tried to get some response from the Vishnu team, no sign of life, gone fishing ??? Are there any special settings for 1M, yet stage 1 ? /Janne __________________ BMW Alpina D5S Touring 2018 BMW Alpina B5 Edition 50 2015 /Janne
	Appreciate 0 Quote

08-15-2012, 09:06 PM	#7
fl335i Captain 159 Rep 942 Posts Drives: 335i Join Date: Oct 2010 Location: FL iTrader: (2)	I'm having the same issue as you today. When I upload the new firmware it just stays red saying ECU resetting or whatever. So I manually on/off'd, and then did the map upload. I spent like 1hr this evening trying to figure this out. What is the answer? Obviously its happening to more than one person. __________________ '07 335i Sedan, base pkg, 6spd Manual, Procede 3 V5 w/NLS, Macht Schnell Downpipes, 18" Staggered 313's w/Conti DWS's, OS Giken TCD LSD, VAC Street Diff Cover, Dinan Oil Cooler, Dinan Intercooler, Akebono Euro Pads, CDV Removed, Black BMW Grilles, Interior & Exterior white LED lighting, LUX Angel Eyes, Debadged, Blend V1 mount, Llumar ATR Tint.
	Appreciate 0 Quote