Cheapest intercooler option HERE!

pwr hungry · 04-14-2013, 02:57 PM

I was just out surfin' the web for some mandrel bent aluminum tubing and came across this intercooler find. I don't know how it performs, but it struck me as very similar to the Big Tom intercoolers and I know those have been a hit on here. So, without further ado, the specs are:

23"L x 12"H x 3 or 4 rows, your choice

They state 3 rows will support up to 600hp and 4 rows 1000+hp.
Prices are $135 and $189 respectively and I don't know if they charge for shipping.

Web address is HERE. If anyone goes for this, feel free to post your findings up here and I can update the first post as necessary for future readers.

nukezero · 04-14-2013, 05:47 PM

You can probably make it work with silicone elbows and what not. The gains should be better than stock and give other name brand intercoolers a run for their money.

But one must expect quite a bit of modification and time to make it work.

Time is money

farb · 04-14-2013, 07:26 PM

great if it's direct bolt on, anything else would require $$ spent to make it fit.

Jeff@TopGearSolutions · 04-14-2013, 07:53 PM

What's the internal fin's look like? That's a big factor between expensive intercoolers and inexpensive options.

autoart · 04-14-2013, 08:34 PM

The inlet and outlet are going the wrong way. You can make it work, but there is not alot of room for the inlet and outlet, plus what holds it in? Too much Time and pain in the ass for me, but your doing it. I say dont try and re-invent the wheel. A used one can be had for $300-400. Good luck!

iBoost · 04-15-2013, 12:21 AM

Quote:

Originally Posted by autoart

The inlet and outlet are going the wrong way. You can make it work, but there is not alot of room for the inlet and outlet, plus what holds it in? Too much Time and pain in the ass for me, but your doing it. I say dont try and re-invent the wheel. A used one can be had for $300-400. Good luck!

this. You're going to spend a lot of time sourcing parts to make it work and money. Then you better hope all that trouble was with it and that it performs well.

Tiago@VRSF · 04-15-2013, 09:41 AM

You're going to have to hack quite a bit to make that work with the inlets/outlets orientation. Get a closeup of the internal and external fin pack before committing to anything.

Our intercoolers start at $420, for the cost of the "custom" intercooler, piping, hardware & modifications involved, you'll have spent more than that on a worse performing longer routing solution vs a bolt on solution with resale value.

04-14-2013, 02:57 PM	#1
pwr hungry Banned 42 Rep 1,257 Posts Drives: 335 Join Date: Mar 2013 Location: Amer'ca iTrader: (2)	Cheapest intercooler option HERE! I was just out surfin' the web for some mandrel bent aluminum tubing and came across this intercooler find. I don't know how it performs, but it struck me as very similar to the Big Tom intercoolers and I know those have been a hit on here. So, without further ado, the specs are: 23"L x 12"H x 3 or 4 rows, your choice They state 3 rows will support up to 600hp and 4 rows 1000+hp. Prices are $135 and $189 respectively and I don't know if they charge for shipping. Web address is HERE. If anyone goes for this, feel free to post your findings up here and I can update the first post as necessary for future readers.
	Appreciate 0 Tweet Quote

04-14-2013, 05:47 PM	#2
nukezero Major 356 Rep 1,465 Posts Drives: BMW 3 series Join Date: Sep 2008 Location: Irvine iTrader: (8)	You can probably make it work with silicone elbows and what not. The gains should be better than stock and give other name brand intercoolers a run for their money. But one must expect quite a bit of modification and time to make it work. Time is money
	Appreciate 0 Quote

04-14-2013, 07:26 PM	#3
farb teh Rider! 12 Rep 488 Posts Drives: E92 335xi Join Date: May 2011 Location: Toronto iTrader: (1)	great if it's direct bolt on, anything else would require $$ spent to make it fit. __________________ 2008 335xi AW/Black MT 383 awhp/410awtq Avant Garde M359 l Hankook Ventus V12 l Kw V1 l M3 Front+sides \| Mtec Rear \| LCI tails l Cobb Stage2+FMIC l AR DP l ER IC l ER CP l Tial BOV \| AFE Stage2 DCI
	Appreciate 0 Quote

04-14-2013, 07:53 PM	#4
Jeff@TopGearSolutions 3472 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	What's the internal fin's look like? That's a big factor between expensive intercoolers and inexpensive options.
	Appreciate 0 Quote

04-14-2013, 08:34 PM	#5
autoart Colonel 372 Rep 2,319 Posts Drives: 2009 335i e90 M/ 22 X3 Join Date: Oct 2010 Location: socal iTrader: (8)	The inlet and outlet are going the wrong way. You can make it work, but there is not alot of room for the inlet and outlet, plus what holds it in? Too much Time and pain in the ass for me, but your doing it. I say dont try and re-invent the wheel. A used one can be had for $300-400. Good luck!
	Appreciate 0 Quote

04-15-2013, 09:41 AM	#7
Tiago@VRSF 2108 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	You're going to have to hack quite a bit to make that work with the inlets/outlets orientation. Get a closeup of the internal and external fin pack before committing to anything. Our intercoolers start at $420, for the cost of the "custom" intercooler, piping, hardware & modifications involved, you'll have spent more than that on a worse performing longer routing solution vs a bolt on solution with resale value.
	Appreciate 0 Quote