[gunda]

So I have searched and now have an idea how to get this done, I just need clarification on one part of the process:

1. Disconnected tpms module in trunk
2. Pulled fuse
3. Removed $2VB from VO using FA_write in the CAS module.

**Changed job to SG_codieren and coded the M3DSC, KOMBI and NFRM modules. (CAPPL/CIC if applicable)

This is the step I am uncertain about, I believe after changing job to > FA_WRITE and coding the CAS Module, I have to reset these modules as well. Can someone please elaborate on how this is done? I read something about using a blank .MAN File (BUT Someone also said this isnt recommended). Can someone please just explain what needs to be done after writing to the CAS Module.

Thanks in advance!

[pweber84]

Originally Posted by gunda

So I have searched and now have an idea how to get this done, I just need clarification on one part of the process:

1. Disconnected tpms module in trunk
2. Pulled fuse
3. Removed $2VB from VO using FA_write in the CAS module.

**Changed job to SG_codieren and coded the M3DSC, KOMBI and NFRM modules. (CAPPL/CIC if applicable)

This is the step I am uncertain about, I believe after changing job to > FA_WRITE and coding the CAS Module, I have to reset these modules as well. Can someone please elaborate on how this is done? I read something about using a blank .MAN File (BUT Someone also said this isnt recommended). Can someone please just explain what needs to be done after writing to the CAS Module.

Thanks in advance!

You just have to remove $2VB VO from CAS and NFRM and recode your CAS,NFRM,CAAPL,KOMBI. You can do it using EXPERTMODUS profile which I can share you, just email me.