[lomenop]

So I had a bad CCC and it was replaced by a used one. Everything is there except the PDC. I checked to make sure the VO was still there, and it was. I removed it, then re-added it hoping it would enable PDC on the CCC but it didn't work.

I'm new to coding, so is this something that can be coded with NCS Expert? If so, maybe someone can help me out by pointing me in the right direction as to which module/variable to change?

[pweber84]

Originally Posted by lomenop

So I had a bad CCC and it was replaced by a used one. Everything is there except the PDC. I checked to make sure the VO was still there, and it was. I removed it, then re-added it hoping it would enable PDC on the CCC but it didn't work.

I'm new to coding, so is this something that can be coded with NCS Expert? If so, maybe someone can help me out by pointing me in the right direction as to which module/variable to change?

You should recode your CAPPL module using NCSExper.

[lomenop]

Thanks, that got it on the menu/display. After that it displayed but no beeping. I found it on other modules CGATE and CHOST. Enabled it there and now it displays and beeps.