Can this be permanetly removed?

robc1976 · 06-14-2013, 11:41 PM

Can the reinforcement plate be permanently removed? My exhaust is hitting this making a rattle (exhaust has been modified slightly).

Plate I am referring to (mine is black)

06-15-2013, 12:02 AM

Doubt it, but even so I would take it to a shop and fix the problem not the symptom.

pits200 · 06-15-2013, 12:08 AM

I dont even have that but I am an xi. I have a plate above the front differential but nothing where yours is.

robc1976 · 06-15-2013, 12:29 AM

It was a "booger on the weld hitting the other pipe, fixing it as we speak.

j1gilles · 06-15-2013, 01:53 AM

Quote:

Originally Posted by pits200

I dont even have that but I am an xi. I have a plate above the front differential but nothing where yours is.

My 09 xi has this plate? Are you sure yours doesnt? I drove around without the plate for a week while I waited for some nylon spacers to drop the plate down 1/2 an inch. My plate was hitting my exhaust due to a mod as well. No problems with the car while it was off but I chose to put it back on

enrita · 06-15-2013, 05:40 AM

Isnt that plate important for rear sosp?

roadkillrob · 06-15-2013, 08:01 AM

I have a much smaller one on my 08, but either way I would fix the problem properly and not just remove something that obviously has a purpose for being there! If it is just that the exhaust can't be made to fit without hitting, I would heat wrap the area or something to stop the rattle before I removed something.

cn555ic · 06-15-2013, 08:45 AM

Just add some washers to give it some height so it will clear it.

pits200 · 06-15-2013, 09:01 AM

Quote:

Originally Posted by j1gilles

My 09 xi has this plate? Are you sure yours doesnt? I drove around without the plate for a week while I waited for some nylon spacers to drop the plate down 1/2 an inch. My plate was hitting my exhaust due to a mod as well. No problems with the car while it was off but I chose to put it back on

I guess I never checked that closely since I haven't changed my exhaust but you're right, I went out and checked and my xi has it also.

j1gilles · 06-15-2013, 09:30 AM

Quote:

Originally Posted by cn555ic

Just add some washers to give it some height so it will clear it.

That's exactly what I did.. I used some nylon washers to drop it a little after I installed my mid pipes...

06-14-2013, 11:41 PM	#1
robc1976 DIYER 634 Rep 5,521 Posts Drives: E90 335i Join Date: Mar 2012 Location: Illinois iTrader: (14)	Can this be permanetly removed? Can the reinforcement plate be permanently removed? My exhaust is hitting this making a rattle (exhaust has been modified slightly). Plate I am referring to (mine is black) Attached Images __________________ JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
	Appreciate 0 Tweet Quote

06-15-2013, 12:02 AM	#2
RemovedUser Guest 0 Rep n/a Posts Drives:	Doubt it, but even so I would take it to a shop and fix the problem not the symptom.
	Appreciate 0 Quote

06-15-2013, 12:08 AM	#3
pits200 Colonel 550 Rep 2,598 Posts Drives: 09 335i X-Drive Black Sapphire Join Date: Mar 2010 Location: Pittsburgh iTrader: (1)	I dont even have that but I am an xi. I have a plate above the front differential but nothing where yours is.
	Appreciate 0 Quote

06-15-2013, 12:29 AM	#4
robc1976 DIYER 634 Rep 5,521 Posts Drives: E90 335i Join Date: Mar 2012 Location: Illinois iTrader: (14)	It was a "booger on the weld hitting the other pipe, fixing it as we speak. __________________ JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
	Appreciate 0 Quote

06-15-2013, 05:40 AM	#6
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Isnt that plate important for rear sosp? __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

06-15-2013, 08:01 AM	#7
roadkillrob Major General 890 Rep 5,475 Posts Drives: 08 335i,22 X3M, 2012 C63 Black Join Date: Jul 2007 Location: NH iTrader: (15)	I have a much smaller one on my 08, but either way I would fix the problem properly and not just remove something that obviously has a purpose for being there! If it is just that the exhaust can't be made to fit without hitting, I would heat wrap the area or something to stop the rattle before I removed something. __________________ 2025 X5 Msport 2008 E93 335i FBO 2012 Mercedes C63 Black Series Alanite Grey
	Appreciate 0 Quote

06-15-2013, 08:45 AM	#8
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Just add some washers to give it some height so it will clear it.
	Appreciate 0 Quote