![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
Phoenix Gold Titanium DEQ Comp
![]() |
![]() |
08-06-2013, 04:18 PM | #1 |
New Member
![]() 2
Rep 26
Posts |
Phoenix Gold Titanium DEQ Comp
Phoenix Gold Titanium DEQ Comp This unit was pulled from my 98 BMW M3 sedan, that had a competition system in it. It works just fine and the dash controller was never installed so it is mint. Electronic copy of manual and the control software will be included on a disc or can be emailed. All sales are final. Guaranteed not to be DOA on arrival. Features 24 bit AD/DA converters Dual 24 bit Motorola DSP56002 signal processors 30 bands of equalization Five selectable Qs for each filter Three additional bands of parametric EQ with five selectable Qs Four Presets: RTA, SPL, SQ, and User Four external relay outputs Six sensor inputs for external 12 volt components High or Low Pass 12 or 24 dB/Octave crossovers Digital time delay, 0 - 100mS Pink noise generator RS-232 port for controlling software DEQ--Measured Specifications Maximum input level: 4 volts Volume control: Unity to -56 dB Maximum output level: 4 volts Frequency Response: +/- 1.25 dB 20 Hz - 20 kHz S/N Ratio (A wtg. @ 1 kHz): 102 dB Separation (iAi wtg @ 1 kHz): >89 dB THD+noise: <.007% @ 1 kHz Input Sensitivity: 4 volts Graphic Filters (30 per CH.): +6 dB,-18 dB Q, 5 per filter: 1, 3.3, 4.2, 10, 15 Parametric Filters (3 per CH.): +6 dB,-24 dB Q, 5 per filter: 1, 6, 10, 15, 21 Crossover Hi and LO pass: 12 dB / 24 dB Stereo, Adjustable, 21 Hz-20 Khz Output Impedance: 100 ohms Input Impedance: 25K ohms Minimum turn-on voltage: 8.5 V Idle Current: 1.1A Dimensions: 14iL x 10.25iW x 2.25iH ![]() ![]() |
![]() |
Bookmarks |
|
|