How do you wire up the procede map changing switch?

schneid4323 · 09-25-2007, 02:20 AM

How do you wire up the map changing switch thing, the valet switch?

shyestsparks · 09-25-2007, 02:33 AM

+1.

335iheLLraiseR · 09-25-2007, 02:35 AM

huh?

335iheLLraiseR · 09-25-2007, 02:36 AM

Quote:

Originally Posted by schneid4323

How do you wire up the map changing switch thing, the valet switch?

what map changing switch thing? valet?

WOPALX · 09-25-2007, 07:33 AM

Quote:

Originally Posted by schneid4323

How do you wire up the map changing switch thing, the valet switch?

Assuming V2 then when you start the car you press on the gas to achieve a certain RPM. Default is apparently going to be set at 1800 RPM which is not much higher than my car runs without any pedal blip but you can set it from 0~????.

This is set up from the software on your laptop when connected to the serial interface. In theory you only need to set it once unless ou change you mind.

IMHO better than a switch as there are no wires, others however disagree.

zenmaster · 09-25-2007, 08:26 AM

Quote:

Originally Posted by WOPALX

Default is apparently going to be set at 1800 RPM which is not much higher than my car runs without any pedal blip but you can set it from 0~????.

There is a problem with your car's idle.

AR230WAKEBOARDER · 09-25-2007, 12:16 PM

I would like to see upon start

Stock idle= Stock map
1800 blip= Map one
2500 blip= Map two

that would be awesome.

cn555ic · 09-25-2007, 12:21 PM

does this mean that u have the V2 delivered to your house!!! I am assume you got delivery of it then...IF your asking these questions, you must be the first four people that shiv said that was going to get the upgrade and install it themselves....Wow thats awesome...hope it was a easy install

335iheLLraiseR · 09-25-2007, 02:24 PM

Quote:

Originally Posted by cn555ic

does this mean that u have the V2 delivered to your house!!! I am assume you got delivery of it then...IF your asking these questions, you must be the first four people that shiv said that was going to get the upgrade and install it themselves....Wow thats awesome...hope it was a easy install

i don't think so, the 4 people were locals.

schneid4323 · 09-25-2007, 04:36 PM

Im talking pre V2, its an actual switch

335iheLLraiseR · 09-25-2007, 04:43 PM

Quote:

Originally Posted by schneid4323

Im talking pre V2, its an actual switch

now you really lost me.....

Ninjaneer · 09-25-2007, 04:44 PM

A physical map switcher was never released for the PROcede. It was in the original plans as a remote control or such but never released. Now they're coming out with the v2 blip / rev thing.

kaji335i · 09-25-2007, 06:12 PM

Quote:

Originally Posted by Ninjaneer

A physical map switcher was never released for the PROcede. It was in the original plans as a remote control or such but never released. Now they're coming out with the v2 blip / rev thing.

+1

Map switching via a switch was implemented with Shiv's Xede product but not the current Procede v1.X product.

Kbueno · 09-25-2007, 06:43 PM

Quote:

Originally Posted by schneid4323

How do you wire up the map changing switch thing, the valet switch?

Since V2 isn't out (except 4 people) and will have the first switchable map:

Relevance much?

09-25-2007, 02:20 AM	#1
schneid4323 Banned 347 Rep 1,134 Posts Drives: 335i, M6 Join Date: Dec 2006 Location: Dallas TX iTrader: (0)	How do you wire up the procede map changing switch? How do you wire up the map changing switch thing, the valet switch?
	Appreciate 0 Tweet Quote

09-25-2007, 02:33 AM	#2
shyestsparks Captain 25 Rep 824 Posts Drives: 335i sedan, 02 Altima VQ35DE-T Join Date: Feb 2007 Location: Ca iTrader: (5)	+1.
	Appreciate 0 Quote

09-25-2007, 12:16 PM	#7
AR230WAKEBOARDER Private First Class 4 Rep 144 Posts Drives: MONTEGO BLUE 335I Join Date: Mar 2007 Location: Why? iTrader: (0)	I would like to see upon start Stock idle= Stock map 1800 blip= Map one 2500 blip= Map two that would be awesome.
	Appreciate 0 Quote

09-25-2007, 12:21 PM	#8
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	does this mean that u have the V2 delivered to your house!!! I am assume you got delivery of it then...IF your asking these questions, you must be the first four people that shiv said that was going to get the upgrade and install it themselves....Wow thats awesome...hope it was a easy install
	Appreciate 0 Quote

09-25-2007, 04:36 PM	#10
schneid4323 Banned 347 Rep 1,134 Posts Drives: 335i, M6 Join Date: Dec 2006 Location: Dallas TX iTrader: (0)	Im talking pre V2, its an actual switch
	Appreciate 0 Quote

09-25-2007, 04:44 PM	#12
Ninjaneer Shadow Warrior 151 Rep 2,095 Posts Drives: '07 335i Sedan Join Date: Aug 2006 Location: Florida iTrader: (0)	A physical map switcher was never released for the PROcede. It was in the original plans as a remote control or such but never released. Now they're coming out with the v2 blip / rev thing. __________________ 335i E90 / Arctic / Gray / Burl Walnut / Steptronic / ZPP / ZSP / Paddles / CA / Nav / PDC / OEM Spoiler Mods: PIAA Angel Eyes, Rear Fog Switch, Escort X50 Blue hardwire, 30% Charcoal Llumar Installing soon: Rear Power Outlets (Happy Robot mod!)
	Appreciate 0 Quote