[USCTROJANSFIGHTON]

Does anyone know if the grill for the fogs be removed from the front?
I am trying to adjust the fog lights. Unable to get the hex driver through the honey comb grill.

I had the bumper install, but cant remember if there are two screw holding the fog light grills in.. I know there are no clips like the center honey comb grill.

Or do I have to remove the fender liner to remove the fog light grill?


Thanks

[bob.g]

from what i remember, each grill has 2 short screws that hold the grill to the bumper, and 2 other short ones in order to screw the fog light onto the bumper (which then fit into the hole in the grill). You will need to get behind the grill in order to unscrew it.

i would remove the front wheels + the fender liners, that would give you tons of room to have access to the grills. Or you can try by just turning the steering wheel and only removing a few screws on the fender liner to pull it back and out of the way, just enough so you can see and reach in.

[USCTROJANSFIGHTON]

Originally Posted by bob.g

from what i remember, each grill has 2 short screws that hold the grill to the bumper, and 2 other short ones in order to screw the fog light onto the bumper (which then fit into the hole in the grill). You will need to get behind the grill in order to unscrew it.

i would remove the front wheels + the fender liners, that would give you tons of room to have access to the grills. Or you can try by just turning the steering wheel and only removing a few screws on the fender liner to pull it back and out of the way, just enough so you can see and reach in.

Great. Thanks for info!